On 1 Aug, Nick Hibma wrote:
>
> Hm, I had a look at the source code, and to be honest I can't find a
> single reason why the path would be unset.
>
> Did the CD reader detached itself from the bus in the meantime, or did
> something like a bus error occur? Check your messages log around the
> t
Hm, I had a look at the source code, and to be honest I can't find a
single reason why the path would be unset.
Did the CD reader detached itself from the bus in the meantime, or did
something like a bus error occur? Check your messages log around the
time the panic occurred to see if something
On 29 Jul, Matthew Jacob wrote:
>
> What hardware?
ahc0: port 0xb000-0xb0ff mem
0xd980-0xd9800fff irq 9 at device 6.0 on pci0
ahc0: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
cd0 at ahc0 bus 0 target 1 lun 0
cd0: Removable CD-ROM SCSI-2 device
cd0: 10.000MB/s transfers (10.000MHz, of
What hardware?
On Sat, 29 Jul 2000, Alexander Leidinger wrote:
> Hi,
>
> while trying to read (dd if=/dev/cd0c) from a damaged cd (the surface is
> a little bit damaged), I've got a panic:
> ---snip---
> #0 boot (howto=260) at ../../kern/kern_shutdown.c:303
> #1 0xc01a0f19 in panic (fmt=0xc0
Hi,
while trying to read (dd if=/dev/cd0c) from a damaged cd (the surface is
a little bit damaged), I've got a panic:
---snip---
#0 boot (howto=260) at ../../kern/kern_shutdown.c:303
#1 0xc01a0f19 in panic (fmt=0xc029aa60 "lockmgr: pid %d, not %s %d unlocking")
at ../../kern/kern_shutdown.c