On Mon, Aug 11, 2003 at 01:36:01PM -0400, Craig Rodrigues wrote:
You can get firmware and drivers for these drives from Hitachi:
http://www.hgst.com/support/
Specifically where? I can't find any firmware there.
___
[EMAIL PROTECTED] mailing list
I've got another drive now to mess about with:
da0: IBM IC35L036UWDY10-0 S23C Fixed Direct Access SCSI-3 device
And I get the same problems.
I would have to see the driver messages to verify that.
You are running down rev. firmware on this drive and early Daytona
firmware revs had some
On Mon, Aug 11, 2003 at 11:14:49AM -0600, Justin T. Gibbs wrote:
I've got another drive now to mess about with:
da0: IBM IC35L036UWDY10-0 S23C Fixed Direct Access SCSI-3 device
And I get the same problems.
I would have to see the driver messages to verify that.
You are running
. Gibbs [mailto:[EMAIL PROTECTED]
Sent: 22 July 2003 17:46
To: Lawrence Farr; [EMAIL PROTECTED]
Subject: Re: Adaptec AIC7902 Ultra320 Problems
I have a Supermicro SuperServer 6013P-8, with:
ahd0: Adaptec AIC7902 Ultra320 SCSI adapter port
0x4000-0x40ff,0x4400-0x44ff mem 0xfc30
On Tue, Jul 22, 2003 at 01:23:18PM +0100, Lawrence Farr wrote:
I have a Supermicro SuperServer 6013P-8, with:
ahd0: Adaptec AIC7902 Ultra320 SCSI adapter port
0x4000-0x40ff,0x4400-0x44ff mem 0xfc30-0xfc301fff irq 5 at device 2.0 on
pci3
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X
: 22 July 2003 13:43
To: Lawrence Farr
Cc: [EMAIL PROTECTED]
Subject: Re: Adaptec AIC7902 Ultra320 Problems
On Tue, Jul 22, 2003 at 01:23:18PM +0100, Lawrence Farr wrote:
I have a Supermicro SuperServer 6013P-8, with:
ahd0: Adaptec AIC7902 Ultra320 SCSI adapter port
0x4000-0x40ff
Lawrence Farr wrote:
I have a Supermicro SuperServer 6013P-8, with:
ahd0: Adaptec AIC7902 Ultra320 SCSI adapter port
0x4000-0x40ff,0x4400-0x44ff mem 0xfc30-0xfc301fff irq 5 at device 2.0 on
pci3
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
ahd1: Adaptec AIC7902
PROTECTED]
Sent: 22 July 2003 16:12
To: Lawrence Farr
Cc: [EMAIL PROTECTED]
Subject: Re: Adaptec AIC7902 Ultra320 Problems
Lawrence Farr wrote:
I have a Supermicro SuperServer 6013P-8, with:
ahd0: Adaptec AIC7902 Ultra320 SCSI adapter port
0x4000-0x40ff,0x4400-0x44ff mem 0xfc30
I have a Supermicro SuperServer 6013P-8, with:
ahd0: Adaptec AIC7902 Ultra320 SCSI adapter port
0x4000-0x40ff,0x4400-0x44ff mem 0xfc30-0xfc301fff irq 5 at device 2.0 on
pci3
aic7902: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 101-133Mhz, 512 SCBs
ahd1: Adaptec AIC7902 Ultra320 SCSI