Thanks guys! That was fast
On 12/02/2019 20:13, Kristof Provost wrote:
On 2019-02-12 13:54:21 (-0600), Eric van Gyzen wrote:
> I see the same behavior on head (and stable/12).
>
> (kgdb) f
> #16 0x80ce5331 in ether_output_frame (ifp=0xf80003672800,
> m=0xf8000c88b100) a
On 2019-02-12 13:54:21 (-0600), Eric van Gyzen wrote:
> I see the same behavior on head (and stable/12).
>
> (kgdb) f
> #16 0x80ce5331 in ether_output_frame (ifp=0xf80003672800,
> m=0xf8000c88b100) at /usr/src/sys/net/if_ethersubr.c:468
> 468 switch (pfil_run
On 2/12/19 8:53 AM, Pete French wrote:
> I found my panic. If I take everything out of rc.conf and loader.conf
> and sysctl.conf and boot the system it works fine when I add an IP
> address. If I add this one line to sysctl.conf
>
> net.link.ether.inet.garp_rexmit_count=2
>
> Then I get a pan
om: [EMAIL PROTECTED]
[mailto:owner-freebsd-current@;FreeBSD.ORG]On Behalf Of M. Warner Losh
Sent: Monday, October 28, 2002 10:07
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Subject: Re: Networking
In message: <[EMAIL PROTECTED]>
Niklas Johannes Saers <[EMAIL PROTECTED]> w
In message: <[EMAIL PROTECTED]>
Niklas Johannes Saers <[EMAIL PROTECTED]> writes:
: Hi all,
: I'm wondering a bit on the state of the network-drivers in -CURRENT.
: On my laptop running a fairly recent -CURRENT whenever I do a
: ifconfig an0 inet 192.168.1.2 netmask 255.255.255.0
: my
According to Niklas Johannes Saers:
> my laptop will freeze until I unplug the card. My fxp0 works great on the
> same computer. On another box I'm running, the 3Com 509B card that worked
> great with -STABLE gets pings of about 9-10 seconds to a computer it's
> hooked directly against. My an0 is a
