, 2003 09:32
Subject: Re: SATA drive lock-up
It seems Derek Ragona wrote:
Søren,
My setup is as follows:
Maxtor 6Y120MO 120GB SATA drive
Adaptec Serial ATA RAID 1210SA
Intel® Desktop Board D845GEBV2
1GB RAM
1.7 GHz Celeron CPU
Ok, I'll try to get something semialr setup here and try
It seems Derek Ragona wrote:
Søren,
My setup is as follows:
Maxtor 6Y120MO 120GB SATA drive
Adaptec Serial ATA RAID 1210SA
Intel® Desktop Board D845GEBV2
1GB RAM
1.7 GHz Celeron CPU
Ok, I'll try to get something semialr setup here and try to reproduce.
If there is some way to get more
August
Best regards,
Putinas
- Original Message -
From: Soren Schmidt [EMAIL PROTECTED]
To: Derek Ragona [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Saturday, September 20, 2003 10:07
Subject: Re: SATA drive lock-up
It seems Derek Ragona wrote:
I have a single SATA drive
It seems Putinas wrote:
Hi all,
Inspired with all the FreeBSD is free software , windows and buggy hardware
and blabla I realize what maybe I could do more to help solve this problem.
I made small research on my computer and I find out what till the cvsup date
2003.08.24.00.00.00 till ATAng
Søren,
My setup is as follows:
Maxtor 6Y120MO 120GB SATA drive
Adaptec Serial ATA RAID 1210SA
Intel® Desktop Board D845GEBV2
1GB RAM
1.7 GHz Celeron CPU
The motherboard has the latest P17 BIOS.
The system has a teac 52x CD-ROM as the Master ATA device on the
motherboards primary IDE controller.
I couldn't make a kernel with 9/19 cvsuped. I downloaded and installed the
9/20 snapshot. That also wouldn't complete a buildworld without breaking
with the hard drive error.
I booted windows and stress tested the drive with all kinds of I/O. Not a
hiccup.
It isn't the hardware, it has to
On Mon, 2003-09-22 at 06:54, Derek Ragona wrote:
I couldn't make a kernel with 9/19 cvsuped. I downloaded and installed the
9/20 snapshot. That also wouldn't complete a buildworld without breaking
with the hard drive error.
I booted windows and stress tested the drive with all kinds of
I don't want to get into some flame war here. I am trying to provide what
information I can. If Soren, or anyone else wants more debugging
information I will be happy to do what I can to provide that
information. I simply need them to tell me what and how to capture the
information. As the
It seems Derek Ragona wrote:
I have a single SATA drive on an Adaptec 1210SA card.
The drive will give a write error warning a few times, then will repeatedly
give:
ad4: timeout sending command=ca
The only recovery is the reset switch, reboot single-user fsck, and then
come back up in
: [EMAIL PROTECTED]
Sent: Saturday, September 20, 2003 10:07 AM
Subject: Re: SATA drive lock-up
It seems Derek Ragona wrote:
I have a single SATA drive on an Adaptec 1210SA card.
The drive will give a write error warning a few times, then will repeatedly
give:
ad4: timeout sending command=ca
This was using the 9/18 snapshot, I tried to cvsup it to the most current,
but the drive errors prevent the update.
I just reloaded with the 9/19 snapshot, and will report if the error still
exists.
As for the hardware, it is all brand new hardware, and the system dual
boots, the other OS has
The 9/19 snapshot has the same issues.
I will try to cvsup it and build a new kernel, if I can.
-Derek
At 05:36 AM 9/20/2003 -0500, Derek Ragona wrote:
This was using the 9/18 snapshot, I tried to cvsup it to the most current,
but the drive errors prevent the update.
I just reloaded
The system died in buildworld, this time it fell into the debugger.
spec_getpages(ad4s1d) I/O read failure (error=5)
-Derek
At 02:53 PM 9/20/2003 -0500, Derek Ragona wrote:
The 9/19 snapshot has the same issues.
I will try to cvsup it and build a new kernel, if I can.
-Derek
I have a single SATA drive on an Adaptec 1210SA card.
The drive will give a write error warning a few times, then will repeatedly
give:
ad4: timeout sending command=ca
The only recovery is the reset switch, reboot single-user fsck, and then
come back up in multiuser.
These errors occur with
14 matches
Mail list logo
