On Fri, Mar 15, 2002 at 11:11:45PM +0100, Wilko Bulte wrote:
Never mind.. this was due to the fact that device.hints had APM
disabled.
Looks a lot better now:
APM version: 1.2
APM Managment: Enabled
AC Line status: on-line
Battery status: charging
Remaining battery life: 62%
Remaining battery time: unknown
Number of batteries: 4
Battery 0:
Battery status: charging
Remaining battery life: 62%
Remaining battery time: 0:01:27
Battery 1:
Battery status: not present
Battery 2:
Battery status: not present
Battery 3:
Battery status: not present
APM Capacities:
global standby state
global suspend state
resume timer from standby
resume timer from suspend
> Hi
>
> I just went -current with my Compaq Armada E700 laptop.
> Coming from -stable.
>
> I'm a bit puzzled by:
>
> WKB ~: apm
> APM version: 1.2
> APM Managment: Enabled
> AC Line status: off-line
> Battery status: charging
> Remaining battery life: invalid value (0x)
> Remaining battery time: unknown
> Number of batteries: 0
> APM Capacities:
> unknown
>
> dmesg also has some strange things it appears
>
>
> Rebooting...
> Copyright (c) 1992-2002 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> The Regents of the University of California. All rights reserved.
> FreeBSD 5.0-CURRENT #2: Fri Mar 15 22:48:40 CET 2002
> [EMAIL PROTECTED]:/usr/src/sys/i386/compile/WILKLT
> Preloaded elf kernel "/boot/kernel/kernel" at 0xc0436000.
> Preloaded elf module "/boot/kernel/acpi.ko" at 0xc04360a8.
> Timecounter "i8254" frequency 1193182 Hz
> Timecounter "TSC" frequency 498669634 Hz
> CPU: Pentium III/Pentium III Xeon/Celeron (498.67-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0x681 Stepping = 1
>
>Features=0x383f9ff
> real memory = 268369920 (262080K bytes)
> avail memory = 256614400 (250600K bytes)
> Pentium Pro MTRR support enabled
> Using $PIR table, 268435454 entries at 0xc00f0970
> npx0: on motherboard
> npx0: INT 16 interface
> acpi0: on motherboard
> ACPI-1305: *** Error: Method execution failed, AE_AML_REGION_LIMIT
> acpi0: power button is handled as a fixed feature programming model.
> ACPI timer looks BAD min = 2, max = 6, width = 5
> ACPI timer looks BAD min = 2, max = 6, width = 5
> ACPI timer looks BAD min = 2, max = 6, width = 5
> ACPI timer looks BAD min = 2, max = 6, width = 5
> ACPI timer looks BAD min = 2, max = 6, width = 5
> ACPI timer looks BAD min = 2, max = 6, width = 5
> ACPI timer looks BAD min = 2, max = 6, width = 5
> ACPI timer looks BAD min = 2, max = 6, width = 5
> ACPI timer looks BAD min = 2, max = 6, width = 5
> ACPI timer looks BAD min = 2, max = 6, width = 5
> Timecounter "ACPI-safe" frequency 3579545 Hz
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x5008-0x500b on acpi0
> acpi_cpu0: on acpi0
> acpi_tz0: on acpi0
> acpi_acad0: on acpi0
> pcib0: at pcibus 0 on motherboard
> pci0: on pcib0
> pcib1: at device 1.0 on pci0
> pci1: on pcib1
> pci1: at device 0.0 (no driver attached)
> pcic0: mem 0x4110-0x41100fff irq 11 at device
>4.0 on pci0
> pcic0: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq]
> pccard0: on pcic0
> pcic1: mem 0x4118-0x41180fff irq 11 at device
>4.1 on pci0
> pcic1: TI12XX PCI Config Reg: [speaker enable][pwr save][CSC serial isa irq]
> pccard1: on pcic1
> isab0: at device 7.0 on pci0
> isa0: on isab0
> atapci0: port 0x3420-0x342f at device 7.1 on pci0
> ata0: at 0x1f0 irq 14 on atapci0
> ata1: at 0x170 irq 15 on atapci0
> uhci0: port 0x3400-0x341f irq 11 at device
>7.2 on pci0
> usb0: on uhci0
> usb0: USB revision 1.0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> pci0: at device 7.3 (no driver attached)
> pcm0: port 0x3000-0x30ff irq 11 at device 8.0 on pci0
> fxp0: port 0x3440-0x347f mem
>0x4120-0x4121,0x4128-0x41280fff irq 11 at device 9.0 on pci0
> fxp0: Ethernet address 00:d0:59:0b:f3:c2
> inphy0: on miibus0
> inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> pci0: at device 9.1 (no driver attached)
> orm0: at iomem 0xd-0xd17ff,0xc-0xc on isa0
> atkbdc0: at port 0x64,0x60 on isa0
> atkbd0: flags 0x1 irq 1 on atkbdc0
> kbd0 at atkbd0
> psm0: irq 12 on atkbdc0
> psm0: model Generic PS/2 mouse, device ID 0
> fdc0: at port
>0x3f7,0x3f0-0x3f5 irq 6 drq 2 on isa0
> fdc0: FIFO enabled, 8 bytes threshold
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> ppc0: at port 0x378-0x37f irq 7 on isa0
> ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
> lpt0: on ppbus0
> lpt0: Interrupt-driven port
> sc0: at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
> sio0: type 16550A
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: at port 0x3c0-0x3df iomem 0xa