Re: Using ipfw in current branch

2003-10-20 Thread Brian Lynn
Hello again, Please disregard the email below, I realized I wasn't using that kernconf file. So I re-added the following lines to the latest GENRIC kernconf file: # JD options IPFILTER# ipfilter or something options IPDIVERT

new -current panic

2003-10-20 Thread Soren Schmidt
Just got this one (using bsd scheduler): Fatal trap 12: page fault while in kernel mode fault virtual address = 0x24 fault code = supervisor read, page not present instruction pointer = 0x8:0xc04b8f3b stack pointer = 0x10:0xcd619bc4 frame pointer =

Re: Help saving my system

2003-10-20 Thread Mark Murray
Scott M. Likens writes: Ah, such a strong comment from such a strong member. I would have thought you were to high to stoop that low? But I guess it's good to be flamed for being honest? is it not? Please don't encourage flames and flamers by responding to them. M -- Mark Murray iumop

Re: DISCUSSION: /dev/fd%d.%d and /dev/{a}cd%d[ac] to be discontinued ?

2003-10-20 Thread Poul-Henning Kamp
In message [EMAIL PROTECTED], Andrew Gallatin writes: Poul-Henning Kamp writes: As soon as these uses of cloning code has been removed, I will move the floppy and CD drivers under GEOM, paving the way for the significant changes to the buf/VM system which some of you have already

Random signals in {build,install}world recently?

2003-10-20 Thread Vallo Kallaste
Hi It seems to be a recent problem. The hardware is OK, both Windows XP (which I use very seldom) and Gentoo Linux do not exhibit any problems. Basically one will get random signals as I have got in build- and installworld. It's impossible to complete make -j2 buildworld on my machine, but

Re: Random signals in {build,install}world recently?

2003-10-20 Thread Harti Brandt
On Mon, 20 Oct 2003, Vallo Kallaste wrote: VKHi VK VKIt seems to be a recent problem. The hardware is OK, both Windows XP VK(which I use very seldom) and Gentoo Linux do not exhibit any VKproblems. VKBasically one will get random signals as I have got in build- and VKinstallworld. It's impossible

Re: __fpclassifyd problem

2003-10-20 Thread John Angelmo
Steve Kargl wrote: On Sun, Oct 19, 2003 at 03:48:58PM -0700, Kris Kennaway wrote: On Sun, Oct 19, 2003 at 03:13:41PM -0700, Steve Kargl wrote: I sent in an email *along time ago* about this type of problem. See the fallout due to revision 1.24 of lib/libc/stdio/findfp.c. IMHO, all shared

Re: __fpclassifyd problem

2003-10-20 Thread Kris Kennaway
On Mon, Oct 20, 2003 at 10:51:50AM +0200, John Angelmo wrote: Are there any hints how to solve my problem, I'm willing to give it a shot ;) We're discussing it, please be patient. kris pgp0.pgp Description: PGP signature

802.11g PCMCIA card mode

2003-10-20 Thread wintran
Hi, I have Proxim Orinoco 802.11b/g card, Atheros 5212. I need set ad-hoc mode (ifconfig ath0 mode 11g mediaopt adhoc), but it doesn't work. Is it supported this mode? Tin Hugo Boss - Boss Intense Nov vn pro eny.

Re: __fpclassifyd problem

2003-10-20 Thread M. Warner Losh
In message: [EMAIL PROTECTED] Scott Long [EMAIL PROTECTED] writes: : We need to resolve this before 5.2 in some fashion. It looks like the : easiest thing to do is bump libm. Is this advisable? The problem with bumping libm is that we also need, strictly speaking, to bump all

Re: __fpclassifyd problem

2003-10-20 Thread M. Warner Losh
In message: [EMAIL PROTECTED] Steve Kargl [EMAIL PROTECTED] writes: : I sent in an email *along time ago* about this type : of problem. See the fallout due to revision 1.24 : of lib/libc/stdio/findfp.c. IMHO, all shared libraries : versions should have been bumped in going from 4.x

USB problem: /dev/ugen* dynamically auto-reconfigures to root:operator 644, so non-root user unable to access USB devices even if wanted

2003-10-20 Thread Andreas Klemm
Hi, have severe problems accessing usb devices as non-root user. In this case a Canon Powershot G5 camera. I want to download pics from my digicam using digikam application as user andreas. The devices that are being used by digikam: [EMAIL PROTECTED] ~ lsof | grep digikam | grep /dev digikam

panic with unloading nvidia.ko

2003-10-20 Thread C. Kukulies
I just got a kernel panic after making /usr/ports/x11/nvidia-driver. I did a make, make reinstall. Then I did a kldunload nvidia.ko and got: nvidia0: detached panic: malloc(9)/free(9) confusion. Probably freeing with wrong type, but maybe not here. Debugger(panic) Stopped at Debugger+0x54:

Re: USB problem: /dev/ugen* dynamically auto-reconfigures to root:operator 644, so non-root user unable to access USB devices even if wanted

2003-10-20 Thread Andreas Klemm
On Mon, Oct 20, 2003 at 12:19:46PM +0200, Poul-Henning Kamp wrote: In message [EMAIL PROTECTED], Andreas Klemm wri tes: Hi, have severe problems accessing usb devices as non-root user. In this case a Canon Powershot G5 camera. I want to download pics from my digicam using digikam

Re: USB problem: /dev/ugen* dynamically auto-reconfigures to root:operator 644, so non-root user unable to access USB devices even if wanted

2003-10-20 Thread Poul-Henning Kamp
In message [EMAIL PROTECTED], Andreas Klemm writ es: 1) /etc/devfs.conf with: permugen1 0666 permugen1.1 0666 permugen1.2 0666 permugen1.3 0666 I would probably just use a wildcard: permugen* 0666 1st needs a command like

success (Re: USB problem: /dev/ugen* dynamically auto-reconfigures to root:operator 644, so non-root user unable to access USB devices even if wanted)

2003-10-20 Thread Andreas Klemm
Poul-Henning, many thanks for you kind guidance to the wonderful world of devfs (which I never had to tweak in the past) ;-) On Mon, Oct 20, 2003 at 01:44:50PM +0200, Poul-Henning Kamp wrote: I would probably just use a wildcard: permugen* 0666 The wildcard feature is really fine !

Re: success (Re: USB problem: /dev/ugen* dynamically auto-reconfigures to root:operator 644, so non-root user unable to access USB devices even if wanted)

2003-10-20 Thread Poul-Henning Kamp
In message [EMAIL PROTECTED], Andreas Klemm writ es: Hint: here again we seem to be missing a manpage: devfs.rules(5). In /etc/rc.subr you see for example a reference to this manpage, but it doesn't exist. I'm sure we'd be more than happy to see somebody (hint hint!) send manual page text to us

ad0: WARNING - WRITE_MUL write data underrun 81922048

2003-10-20 Thread Daryl Chance
I got this message while copying some files from my windows box (via samba) to my FreeBSD box. The files were going to ad4/ad6 (vinum raid). All I did was cvsup src and ports during the copy and also, after the cvsup was done, installed apache2. uname: FreeBSD mp3.earthlink.net 5.1-CURRENT

Re: Random signals in {build,install}world recently?

2003-10-20 Thread Mark Santcroos
On Mon, Oct 20, 2003 at 10:27:38AM +0200, Harti Brandt wrote: On Mon, 20 Oct 2003, Vallo Kallaste wrote: VKHi VK VKIt seems to be a recent problem. The hardware is OK, both Windows XP VK(which I use very seldom) and Gentoo Linux do not exhibit any VKproblems. VKBasically one will get

Re: __fpclassifyd problem

2003-10-20 Thread Daniel Eischen
On Mon, 20 Oct 2003, M. Warner Losh wrote: In message: [EMAIL PROTECTED] Scott Long [EMAIL PROTECTED] writes: : We need to resolve this before 5.2 in some fashion. It looks like the : easiest thing to do is bump libm. Is this advisable? The problem with bumping libm is that

Re: Random signals in {build,install}world recently?

2003-10-20 Thread Harti Brandt
On Mon, 20 Oct 2003, Mark Santcroos wrote: MSOn Mon, Oct 20, 2003 at 10:27:38AM +0200, Harti Brandt wrote: MS On Mon, 20 Oct 2003, Vallo Kallaste wrote: MS MS VKHi MS VK MS VKIt seems to be a recent problem. The hardware is OK, both Windows XP MS VK(which I use very seldom) and Gentoo Linux do

Re: Random signals in {build,install}world recently?

2003-10-20 Thread Mark Santcroos
On Mon, Oct 20, 2003 at 03:29:04PM +0200, Harti Brandt wrote: MS I have the same MB just with 1800+ processors. I had to reduce the CPU MS frequency by about 10% in the BIOS setup to get the machine stable. I MS assume the problem is actually the memory. MS MSCouldn't the following be of help

Re: Random signals in {build,install}world recently?

2003-10-20 Thread Vallo Kallaste
On Mon, Oct 20, 2003 at 10:27:38AM +0200, Harti Brandt [EMAIL PROTECTED] wrote: VKIt seems to be a recent problem. The hardware is OK, both Windows XP VK(which I use very seldom) and Gentoo Linux do not exhibit any VKproblems. VKBasically one will get random signals as I have got in build-

Re: Random signals in {build,install}world recently?

2003-10-20 Thread Barney Wolff
On Mon, Oct 20, 2003 at 03:20:56PM +0200, Mark Santcroos wrote: On Mon, Oct 20, 2003 at 10:27:38AM +0200, Harti Brandt wrote: On Mon, 20 Oct 2003, Vallo Kallaste wrote: VKHi VK VKIt seems to be a recent problem. The hardware is OK, both Windows XP VK(which I use very seldom) and

Re: success (Re: USB problem: /dev/ugen* dynamically auto-reconfigures to root:operator 644, so non-root user unable to access USB devices even if wanted)

2003-10-20 Thread David O'Brien
On Mon, Oct 20, 2003 at 02:40:00PM +0200, Poul-Henning Kamp wrote: Hint: here again we seem to be missing a manpage: devfs.rules(5). In /etc/rc.subr you see for example a reference to this manpage, but it doesn't exist. I'm sure we'd be more than happy to see somebody (hint hint!) send

Re: this /rescue thing

2003-10-20 Thread David O'Brien
On Mon, Oct 20, 2003 at 11:55:57AM +0200, C. Kukulies wrote: === rescue/rescue install -s -o root -g wheel -m 555 rescue /rescue install -o root -g wheel -m 555 nextboot_FIXED /rescue/nextboot.sh install: /rescue/nextboot.sh: Not a directory *** Error code 71 Stop in

Re: Random signals in {build,install}world recently?

2003-10-20 Thread Christian Brueffer
On Mon, Oct 20, 2003 at 10:50:02AM -0400, Barney Wolff wrote: On Mon, Oct 20, 2003 at 03:20:56PM +0200, Mark Santcroos wrote: On Mon, Oct 20, 2003 at 10:27:38AM +0200, Harti Brandt wrote: On Mon, 20 Oct 2003, Vallo Kallaste wrote: VKHi VK VKIt seems to be a recent problem. The

Re: Random signals in {build,install}world recently?

2003-10-20 Thread Harti Brandt
On Mon, 20 Oct 2003, Christian Brueffer wrote: CBOn Mon, Oct 20, 2003 at 10:50:02AM -0400, Barney Wolff wrote: CB On Mon, Oct 20, 2003 at 03:20:56PM +0200, Mark Santcroos wrote: CB On Mon, Oct 20, 2003 at 10:27:38AM +0200, Harti Brandt wrote: CB On Mon, 20 Oct 2003, Vallo Kallaste wrote: CB

Re: new -current panic

2003-10-20 Thread Bernd Walter
On Mon, Oct 20, 2003 at 09:09:47AM +0200, Soren Schmidt wrote: Just got this one (using bsd scheduler): Fatal trap 12: page fault while in kernel mode fault virtual address = 0x24 fault code = supervisor read, page not present instruction pointer = 0x8:0xc04b8f3b stack

Re: USB problem: /dev/ugen* dynamically auto-reconfigures to root:operator 644, so non-root user unable to access USB devices even if wanted

2003-10-20 Thread Bernd Walter
On Mon, Oct 20, 2003 at 01:44:50PM +0200, Poul-Henning Kamp wrote: In message [EMAIL PROTECTED], Andreas Klemm writ es: [EMAIL PROTECTED] ~ ls -l /dev/ugen* crw-r--r-- 1 root operator 114, 0 Oct 20 13:14 /dev/ugen0 crw-r--r-- 1 root operator 114, 2 Oct 20 13:14 /dev/ugen0.2

Re: USB problem: /dev/ugen* dynamically auto-reconfigures to root:operator 644, so non-root user unable to access USB devices even if wanted

2003-10-20 Thread Poul-Henning Kamp
In message [EMAIL PROTECTED], Bernd Walter writes: On Mon, Oct 20, 2003 at 01:44:50PM +0200, Poul-Henning Kamp wrote: In message [EMAIL PROTECTED], Andreas Klemm writ es: [EMAIL PROTECTED] ~ ls -l /dev/ugen* crw-r--r-- 1 root operator 114, 0 Oct 20 13:14 /dev/ugen0 crw-r--r-- 1 root

ethercons: ethernet console driver for 5-current

2003-10-20 Thread Robert Watson
I had a fair amount of time over the last week running in disconnected operation, and realized I had too many cables under my desk, so I spent a bit of time exploring the FreeBSD console code. After reading a FREENIX paper this summer on a Linux ethernet console driver, I took a pass at

Re: bug in NSS ?

2003-10-20 Thread Scot W. Hetzel
From:[EMAIL PROTECTED] I have a problem with nss_ldap on FreeBSD. After tranfer users from /etc/passwd to ldap directories my users cannot send a mail via /usr/bin/mail | /usr/sbin/sendmail program: : Any ideas ? What are the contents of the /usr/local/lib/sasl*/Sendmail.conf file? Is

Re: sata + vinum + Asus p4p800 = :(

2003-10-20 Thread Alexander Leidinger
Greg 'groggy' Lehey schrieb: Provide a dump? Analyse the problem yourself? This *is* -CURRENT, after all. I can reproduce this here (same MB). I don't think it's a vinum problem, but vinum seems to be a good way to reproduce the bug. I set up a stripe over 2 SATA disks, newfs it, run iozone

Re: ethercons: ethernet console driver for 5-current

2003-10-20 Thread Steve Kargl
On Mon, Oct 20, 2003 at 12:13:27PM -0400, Robert Watson wrote: I had a fair amount of time over the last week running in disconnected operation, and realized I had too many cables under my desk, so I spent a bit of time exploring the FreeBSD console code. After reading a FREENIX paper this

[current tinderbox] failure on alpha/alpha

2003-10-20 Thread Tinderbox
TB --- 2003-10-20 16:00:01 - tinderbox 2.2 running on cueball.rtp.FreeBSD.org TB --- 2003-10-20 16:00:01 - starting CURRENT tinderbox run for alpha/alpha TB --- 2003-10-20 16:00:01 - checking out the source tree TB --- cd /home/des/tinderbox/CURRENT/alpha/alpha TB --- /usr/bin/cvs -f -R -q

pcm exclusive sleep mutex with Oct19 CURRENT

2003-10-20 Thread Paolo Pisati
from my dmesg: [snip] pcm0: ESS Technology Allegro-1 port 0xb800-0xb8ff irq 5 at device 1.0 on pci2 pcm0: failed to enable memory mapping! pcm0: ESS Technology ES1988 AC97 Codec malloc() of 64 with the following non-sleepable locks held: exclusive sleep mutex pcm0:mixer (pcm mixer) r = 0

Re: sata + vinum + Asus p4p800 = :(

2003-10-20 Thread Balazs Nagy
On Monday, Oct 20, 2003, at 19:02 Europe/Budapest, Alexander Leidinger wrote: Greg 'groggy' Lehey schrieb: Provide a dump? Analyse the problem yourself? This *is* -CURRENT, after all. I can reproduce this here (same MB). I don't think it's a vinum problem, but vinum seems to be a good way to

Re: bug in NSS ?

2003-10-20 Thread Alex Deiter
I have a problem with nss_ldap on FreeBSD. After tranfer users from /etc/passwd to ldap directories my users cannot send a mail via /usr/bin/mail | /usr/sbin/sendmail program: What are the contents of the /usr/local/lib/sasl*/Sendmail.conf file? Is pwcheck_method set to saslauthd, or sasldb?

Re: pcm exclusive sleep mutex with Oct19 CURRENT

2003-10-20 Thread Kris Kennaway
On Mon, Oct 20, 2003 at 07:15:19PM +0200, Paolo Pisati wrote: from my dmesg: [snip] pcm0: ESS Technology Allegro-1 port 0xb800-0xb8ff irq 5 at device 1.0 on pci2 pcm0: failed to enable memory mapping! pcm0: ESS Technology ES1988 AC97 Codec malloc() of 64 with the following non-sleepable

Re: ethercons: ethernet console driver for 5-current

2003-10-20 Thread Kris Kennaway
On Mon, Oct 20, 2003 at 10:03:52AM -0700, Steve Kargl wrote: On Mon, Oct 20, 2003 at 12:13:27PM -0400, Robert Watson wrote: I had a fair amount of time over the last week running in disconnected operation, and realized I had too many cables under my desk, so I spent a bit of time

Re: ethercons: ethernet console driver for 5-current

2003-10-20 Thread Robert Watson
On Mon, 20 Oct 2003, Steve Kargl wrote: On Mon, Oct 20, 2003 at 12:13:27PM -0400, Robert Watson wrote: I had a fair amount of time over the last week running in disconnected operation, and realized I had too many cables under my desk, so I spent a bit of time exploring the FreeBSD

Re: this /rescue thing

2003-10-20 Thread Christoph P. Kukulies
On Mon, Oct 20, 2003 at 08:06:10AM -0700, David O'Brien wrote: On Mon, Oct 20, 2003 at 11:55:57AM +0200, C. Kukulies wrote: === rescue/rescue install -s -o root -g wheel -m 555 rescue /rescue install -o root -g wheel -m 555 nextboot_FIXED /rescue/nextboot.sh install:

Re: Asus A7V8X-X USB problems

2003-10-20 Thread Doug White
On Sat, 18 Oct 2003, Greg J. wrote: On Sat, 18 Oct 2003 15:55:52 -0700 (PDT) Doug White [EMAIL PROTECTED] wrote: On Wed, 15 Oct 2003, Doug White wrote: Anyone else having these errors? Is there a way to fix it? What's attached to the ports? Nothing.. if I plug

Re: this /rescue thing

2003-10-20 Thread Tim Kientzle
C. Kukulies wrote: /rescue is always causing trouble with me here. make world falls over with: === rescue/rescue install -s -o root -g wheel -m 555 rescue /rescue install -o root -g wheel -m 555 nextboot_FIXED /rescue/nextboot.sh install: /rescue/nextboot.sh: Not a directory *** Error code

Re: pcm exclusive sleep mutex with Oct19 CURRENT

2003-10-20 Thread Paolo Pisati
On Mon, Oct 20, 2003 at 10:37:00AM -0700, Kris Kennaway wrote: Unfortunately none of the sound developers have been interested in looking at the locking problems in the code. =( acquiring duplicate lock of same type: pcm channel 1st pcm0:record:0 @ /usr/src/sys/dev/sound/pcm/sound.c:195

PCVT in 5.1-CURRENT

2003-10-20 Thread William Pechter
Does FreeBSD 5.1-Current actually work with the PCVT driver. I've been unable to get any output to the console after the loader starts the kernel load with PCVT. If anyone's got a working configuration with PCVT I'd love to get a copy of their kernel configuration... I've moved up to 5.1-Current

Re: Random signals in {build,install}world recently?

2003-10-20 Thread Marius Strobl
On Mon, Oct 20, 2003 at 05:08:26PM +0200, Christian Brueffer wrote: On Mon, Oct 20, 2003 at 10:50:02AM -0400, Barney Wolff wrote: On Mon, Oct 20, 2003 at 03:20:56PM +0200, Mark Santcroos wrote: On Mon, Oct 20, 2003 at 10:27:38AM +0200, Harti Brandt wrote: On Mon, 20 Oct 2003, Vallo

Re: PCVT in 5.1-CURRENT

2003-10-20 Thread Hellmuth Michaelis
William Pechter wrote: Does FreeBSD 5.1-Current actually work with the PCVT driver. I've been unable to get any output to the console after the loader starts the kernel load with PCVT. If anyone's got a working configuration with PCVT I'd love to get a copy of their kernel

GEOM gbde broken?

2003-10-20 Thread Thorsten Schroeder
Hi, i updated my -current box yesterday from cvs to FreeBSD 5.1-CURRENT #6: Sun Oct 19 17:40:10 CEST 2003. Now i'm not able to attach gbde encrypted filesystems - regardless if it's a disk image created with mdconfig, or a partition on harddisk. gdbe attach works without any error message, but

Re: GEOM gbde broken?

2003-10-20 Thread Florian C. Smeets
Thorsten Schroeder wrote: Hi, i updated my -current box yesterday from cvs to FreeBSD 5.1-CURRENT #6: Sun Oct 19 17:40:10 CEST 2003. Now i'm not able to attach gbde encrypted filesystems - regardless if it's a disk image created with mdconfig, or a partition on harddisk. [...] update your

Re: GEOM gbde broken?

2003-10-20 Thread Poul-Henning Kamp
In message [EMAIL PROTECTED], Thorsten Schroeder writes: Hi, i updated my -current box yesterday from cvs to FreeBSD 5.1-CURRENT #6: Sun Oct 19 17:40:10 CEST 2003. Now i'm not able to attach gbde encrypted filesystems - regardless if it's a disk image created with mdconfig, or a partition on

[current tinderbox] failure on i386/i386

2003-10-20 Thread Tinderbox
TB --- 2003-10-20 18:12:23 - tinderbox 2.2 running on cueball.rtp.FreeBSD.org TB --- 2003-10-20 18:12:23 - starting CURRENT tinderbox run for i386/i386 TB --- 2003-10-20 18:12:23 - checking out the source tree TB --- cd /home/des/tinderbox/CURRENT/i386/i386 TB --- /usr/bin/cvs -f -R -q

Re: acpi on fujitsu-siemens

2003-10-20 Thread Nate Lawson
ACPI-1287: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.LNKU._CRS] (Node 0xc40e49c0), AE_AML_UNINITIALIZED_LOCAL ACPI-0175: *** Error: Method execution failed [\\_SB_.PCI0.LPCB.LNKU._CRS] (Node 0xc40e49c0), AE_AML_UNINITIALIZED_LOCAL This means your AML is lousy. Try some of

kuku@kukulies.org

2003-10-20 Thread masta
Christoph P. Kukulies wrote: [ stuff removed ] You're missing the point of /rescue. It MUST be in / to be of any use. Yeah, but what do if the partition overflows? Plan ahead next time. Maybe take a backup, and remove redundancies or unnecessary files. You could simply resize your

panic: Memory modified after free

2003-10-20 Thread othermark
I have a strange panic during the isa pnp code that does not occur with a 5.0-release kernel. I have tried enabling and disabling acpi. it does not effect this panic one way or another. This is a kernel from -current 10/20 (today). I'm not sure how to get this to boot with no way to disable

PC Card Ethernet attach fails in -CURRENT (FA410TX on ThinkPad 240X)

2003-10-20 Thread Mark Valentine
I happily installed 5.1 on this laptop over the network using my NETGEAR FA410TX PCMCIA card, but on updating to -CURRENT the attach fails. Verbose boots from both 5.1-RELEASE and -CURRENT are appended, but the vital difference is this: ed1: NETGEAR FA410TX at port 0x100-0x11f irq 11 function 0

Buildworld fails in 5.1-CURRENT in wall

2003-10-20 Thread Scott Wegener
Fails on usr.bin/wall as follows, cvsup'ed as of ~8pm EST: -- stage 2.1: cleaning up the object tree -- cd /usr/src; MAKEOBJDIRPREFIX=/usr/obj MACHINE_ARCH=i386 MACHINE=i386

Re: bug in NSS ?

2003-10-20 Thread Scot W. Hetzel
From: Alex Deiter [EMAIL PROTECTED] I have a problem with nss_ldap on FreeBSD. After tranfer users from /etc/passwd to ldap directories my users cannot send a mail via /usr/bin/mail | /usr/sbin/sendmail program: What are the contents of the /usr/local/lib/sasl*/Sendmail.conf file? Is

DVD+R burning flakey after ATAng.

2003-10-20 Thread David Gilbert
First of all, as someone noted with disk-at-once, DVD+R (which is always disk-at-once) doesn't entirely burn properly. I havn't been able to nail it down, but certain ISO images work and certain ones don't. This all started screwing up with ATAng. At first, ATAng didn't support atapicam, but

Re: bug in NSS ?

2003-10-20 Thread Scot W. Hetzel
From: Scot W. Hetzel [EMAIL PROTECTED] From: Alex Deiter [EMAIL PROTECTED] I have a problem with nss_ldap on FreeBSD. After tranfer users from /etc/passwd to ldap directories my users cannot send a mail via /usr/bin/mail | /usr/sbin/sendmail program: What are the contents of the

RE: panic with unloading nvidia.ko

2003-10-20 Thread Jason Dictos
Happens to me too :(. I've been trying to get that darn nvidia module to load in the latest current branch without hosing my system. I'm not sure what the magic formula is, but it was working before I recompiled the kernel for ipfilter support. Currently the nvidia module loads ok, but when I

atapicam doesn't work anymore: WAS: DVD+R burning flakey after ATAng.

2003-10-20 Thread slave-mike
atapicam seems to have ceased being functional as well. Performing OPC... /usr/local/bin/cdrecord: Input/output error. send opc: scsi sendcmd: retryable error CDB: 54 01 00 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) David Gilbert wrote: First of all, as someone noted with disk-at-once,

Re: USB Keyboard questions

2003-10-20 Thread Andre Guibert de Bruet
On Mon, 20 Oct 2003, Peter wrote: I have been reading that page and I have the keyboard working, but I fail to see how this will help a user that only has a USB Keyboard that wants to use FreeBSD5.1 and is unable to install it due to the lack of USB support from the start. Some BIOSes offer

Re: PCcards not working (5.1)

2003-10-20 Thread M. Warner Losh
In message: [EMAIL PROTECTED] [EMAIL PROTECTED] writes: : On Thu, Oct 16, 2003 at 09:32:55AM -0600, M. Warner Losh wrote: : ... : : You should use devd instead of pccardd in -current. : : See devd(8) and devd.conf(8). : : That's one problem, but not the problem. The problem that

Re: PC Card Ethernet attach fails in -CURRENT (FA410TX on ThinkPad 240X)

2003-10-20 Thread M. Warner Losh
In message: [EMAIL PROTECTED] Mark Valentine [EMAIL PROTECTED] writes: : ed1: NETGEAR FA410TX at port 0x100-0x11f irq 11 function 0 config 32 on pccard0 : -ed1: bpf attached : -ed1: address 00:48:54:c0:99:7b, type Linksys (16 bit) : -miibus0: MII bus on ed1 : -ukphy0: Generic IEEE

Re: Buildworld fails in 5.1-CURRENT in wall

2003-10-20 Thread M. Warner Losh
I'd remove all the .depend files and try again. Warner ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to [EMAIL PROTECTED]

Re: Buildworld fails in 5.1-CURRENT in wall

2003-10-20 Thread Scott W
M. Warner Losh wrote: I'd remove all the .depend files and try again. Warner ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to [EMAIL PROTECTED] I've tried that one- I'm not

Re: Buildworld fails in 5.1-CURRENT in wall

2003-10-20 Thread M. Warner Losh
In message: [EMAIL PROTECTED] Scott W [EMAIL PROTECTED] writes: : M. Warner Losh wrote: : : I'd remove all the .depend files and try again. : : Warner : ___ : [EMAIL PROTECTED] mailing list :

Re: Buildworld fails in 5.1-CURRENT in wall

2003-10-20 Thread Scott Wegener, Roadster Performance
M. Warner Losh wrote: In message: [EMAIL PROTECTED] Scott W [EMAIL PROTECTED] writes: : M. Warner Losh wrote: : : I'd remove all the .depend files and try again. : : Warner : ___ : [EMAIL PROTECTED] mailing list :