Re: spec_getpages error in current kernel from last night

1999-09-03 Thread Poul-Henning Kamp


can we have:

uname -a,
time of last cvsup/ctm 
and 
dmesg output 

please ?

In message [EMAIL PROTECTED], Rob Snow writes:
Just got this message while in cvsup:

Sep  3 02:01:09 basil /kernel: spec_getpages: I/O read failure: (error
code=0) bp 0xc44a3158 vp 0xc9e071c0
Sep  3 02:01:09 basil /kernel: size: 0, resid: 0, a_count: 803, valid:
0x0
Sep  3 02:01:09 basil /kernel: nread: 0, reqpage: 0, pindex: 0, pcount:
1
Sep  3 02:01:09 basil /kernel: vm_fault: pager read error, pid 921
(cvsup)
Sep  3 02:01:09 basil /kernel: pid 921 (cvsup), uid 0: exited on signal
6 (core dumped)

I'm guessing this is _bad_?


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message


--
Poul-Henning Kamp FreeBSD coreteam member
[EMAIL PROTECTED]   "Real hackers run -current on their laptop."
FreeBSD -- It will take a long time before progress goes too far!


To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message



Re: spec_getpages error in current kernel from last night

1999-09-03 Thread Rob Snow

basil# uname -a
FreeBSD basil.dympna.com 4.0-CURRENT FreeBSD 4.0-CURRENT #0: Thu Sep  2
19:58:43 CDT 1999
[EMAIL PROTECTED]:/stripe/current/src/sys/compile/Basil-SMP-Current 
i386

Last cvsup was 2:03 on Sept 2

dmesg output: (I've snipped out non-existent di's and left the stuff
from my mucking with density for my Exabyte 8505, several modes weren't
supported)

rsnow@basil% dmesg
Copyright (c) 1992-1999 The FreeBSD Project.
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
FreeBSD 4.0-CURRENT #0: Thu Sep  2 19:58:43 CDT 1999
   
[EMAIL PROTECTED]:/stripe/current/src/sys/compile/Basil-SMP-Current
Timecounter "i8254"  frequency 1193182 Hz
CPU: Pentium Pro (686-class CPU)
  Origin = "GenuineIntel"  Id = 0x616  Stepping = 6
 
Features=0xfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV
real memory  = 134217728 (131072K bytes)
SNIPED OUT di's of non-existent devices
avail memory = 127070208 (124092K bytes)
Programming 24 pins in IOAPIC #0
FreeBSD/SMP: Multiprocessor motherboard
 cpu0 (BSP): apic id:  1, version: 0x00040011, at 0xfee0
 cpu1 (AP):  apic id:  0, version: 0x00040011, at 0xfee0
 io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec0
Preloaded elf kernel "kernel" at 0xc02f1000.
Preloaded userconfig_script "/boot/kernel.conf" at 0xc02f109c.
Pentium Pro MTRR support enabled
npx0: math processor on motherboard
npx0: INT 16 interface
pcib0: Host to PCI bridge on motherboard
pci0: PCI bus on pcib0
isab0: Intel 82371SB PCI to ISA bridge at device 7.0 on pci0
isa0: ISA bus on isab0
ide_pci0: Intel PIIX3 Bus-master IDE controller at device 7.1 on pci0
fxp0: Intel EtherExpress Pro 10/100B Ethernet irq 16 at device 12.0 on
pci0
fxp0: Ethernet address 00:a0:c9:93:da:0c
ahc0: Adaptec 2940 SCSI adapter irq 17 at device 13.0 on pci0
ahc0: aic7870 Single Channel A, SCSI Id=7, 16/255 SCBs
vga-pci0: Trident model 9660 VGA-compatible display device irq 18 at
device 14.0 on pci0
ahc1: Adaptec 2940 Ultra SCSI adapter irq 19 at device 15.0 on pci0
ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
fdc0: NEC 72065B or clone at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
wdc0 at port 0x1f0-0x1f7 irq 14 on isa0
wdc0: unit 0 (wd0): Maxtor 7850 AV
wd0: 814MB (1667232 sectors), 1654 cyls, 16 heads, 63 S/T, 512 B/S
atkbdc0: keyboard controller (i8042) at port 0x60-0x6f on isa0
atkbd0: AT Keyboard irq 1 on atkbdc0
vga0: Generic ISA VGA at port 0x3b0-0x3df iomem 0xa-0xb on
isa0
sc0: System console on isa0
sc0: VGA 16 virtual consoles, flags=0x200
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0 at port 0x378-0x37f irq 7 flags 0x40 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: PLIP network interface on ppbus 0
lpt0: generic printer on ppbus 0
lpt0: Interrupt-driven port
ppi0: generic parallel i/o on ppbus 0
APIC_IO: Testing 8254 interrupt delivery
APIC_IO: routing 8254 via pin 2
Waiting 15 seconds for SCSI devices to settle
SMP: AP CPU #1 Launched!
sa0 at ahc0 bus 0 target 4 lun 0
sa0: EXABYTE EXB-85058SQANXR1 0781 Removable Sequential Access SCSI-2
device 
sa0: 5.000MB/s transfers (5.000MHz, offset 11)
da0 at ahc0 bus 0 target 3 lun 0
da0: MICROP 3243-19   1128RA 28RA Fixed Direct Access SCSI-2 device 
da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing
Enabled
da0: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C)
da1 at ahc1 bus 0 target 6 lun 0
da1: SEAGATE ST39173W 5764 Fixed Direct Access SCSI-2 device 
da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing
Enabled
da1: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C)
da2 at ahc1 bus 0 target 8 lun 0
da2: SEAGATE ST19171W 0023 Fixed Direct Access SCSI-2 device 
da2: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing
Enabled
da2: 8683MB (17783112 512 byte sectors: 255H 63S/T 1106C)
changing root device to wd0s2a
vinum: loaded
vinum: reading configuration from /dev/da2s1e
vinum: updating configuration from /dev/da1s1e
(sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 10 0 0 1c 0 
(sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0
(sa0:ahc0:0:4:0): Invalid field in parameter list
(sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 10 0 0 1c 0 
(sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0
(sa0:ahc0:0:4:0): Invalid field in parameter list
(sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 10 0 0 1c 0 
(sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0
(sa0:ahc0:0:4:0): Invalid field in parameter list
(sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 0 0 0 c 0 
(sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0
(sa0:ahc0:0:4:0): Invalid field in parameter list
(sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 0 0 0 c 0 
(sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0
(sa0:ahc0:0:4:0): Invalid field in parameter list
(sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 10 0 0 1c 0 
(sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0
(sa0:ahc0:0:4:0): 

Re: spec_getpages error in current kernel from last night

1999-09-03 Thread Julian Elischer

As Poul says..
first thing.. do a cvsup now and try a very modern kernel.

if that fails we'll have some more things to try by then.
(my workstation just croaked so I'm busy rerouting around the problem)


julian

On Fri, 3 Sep 1999, Rob Snow wrote:

 basil# uname -a
 FreeBSD basil.dympna.com 4.0-CURRENT FreeBSD 4.0-CURRENT #0: Thu Sep  2
 19:58:43 CDT 1999
 [EMAIL PROTECTED]:/stripe/current/src/sys/compile/Basil-SMP-Current 
 i386
 
 Last cvsup was 2:03 on Sept 2
 
 dmesg output: (I've snipped out non-existent di's and left the stuff
 from my mucking with density for my Exabyte 8505, several modes weren't
 supported)
 
 rsnow@basil% dmesg
 Copyright (c) 1992-1999 The FreeBSD Project.
 Copyright (c) 1982, 1986, 1989, 1991, 1993
 The Regents of the University of California. All rights
 reserved.
 FreeBSD 4.0-CURRENT #0: Thu Sep  2 19:58:43 CDT 1999

 [EMAIL PROTECTED]:/stripe/current/src/sys/compile/Basil-SMP-Current
 Timecounter "i8254"  frequency 1193182 Hz
 CPU: Pentium Pro (686-class CPU)
   Origin = "GenuineIntel"  Id = 0x616  Stepping = 6
  
 Features=0xfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV
 real memory  = 134217728 (131072K bytes)
 SNIPED OUT di's of non-existent devices
 avail memory = 127070208 (124092K bytes)
 Programming 24 pins in IOAPIC #0
 FreeBSD/SMP: Multiprocessor motherboard
  cpu0 (BSP): apic id:  1, version: 0x00040011, at 0xfee0
  cpu1 (AP):  apic id:  0, version: 0x00040011, at 0xfee0
  io0 (APIC): apic id:  2, version: 0x00170011, at 0xfec0
 Preloaded elf kernel "kernel" at 0xc02f1000.
 Preloaded userconfig_script "/boot/kernel.conf" at 0xc02f109c.
 Pentium Pro MTRR support enabled
 npx0: math processor on motherboard
 npx0: INT 16 interface
 pcib0: Host to PCI bridge on motherboard
 pci0: PCI bus on pcib0
 isab0: Intel 82371SB PCI to ISA bridge at device 7.0 on pci0
 isa0: ISA bus on isab0
 ide_pci0: Intel PIIX3 Bus-master IDE controller at device 7.1 on pci0
 fxp0: Intel EtherExpress Pro 10/100B Ethernet irq 16 at device 12.0 on
 pci0
 fxp0: Ethernet address 00:a0:c9:93:da:0c
 ahc0: Adaptec 2940 SCSI adapter irq 17 at device 13.0 on pci0
 ahc0: aic7870 Single Channel A, SCSI Id=7, 16/255 SCBs
 vga-pci0: Trident model 9660 VGA-compatible display device irq 18 at
 device 14.0 on pci0
 ahc1: Adaptec 2940 Ultra SCSI adapter irq 19 at device 15.0 on pci0
 ahc1: aic7880 Wide Channel A, SCSI Id=7, 16/255 SCBs
 fdc0: NEC 72065B or clone at port 0x3f0-0x3f7 irq 6 drq 2 on isa0
 wdc0 at port 0x1f0-0x1f7 irq 14 on isa0
 wdc0: unit 0 (wd0): Maxtor 7850 AV
 wd0: 814MB (1667232 sectors), 1654 cyls, 16 heads, 63 S/T, 512 B/S
 atkbdc0: keyboard controller (i8042) at port 0x60-0x6f on isa0
 atkbd0: AT Keyboard irq 1 on atkbdc0
 vga0: Generic ISA VGA at port 0x3b0-0x3df iomem 0xa-0xb on
 isa0
 sc0: System console on isa0
 sc0: VGA 16 virtual consoles, flags=0x200
 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
 sio0: type 16550A
 sio1 at port 0x2f8-0x2ff irq 3 on isa0
 sio1: type 16550A
 sio2: not probed (disabled)
 sio3: not probed (disabled)
 ppc0 at port 0x378-0x37f irq 7 flags 0x40 on isa0
 ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
 plip0: PLIP network interface on ppbus 0
 lpt0: generic printer on ppbus 0
 lpt0: Interrupt-driven port
 ppi0: generic parallel i/o on ppbus 0
 APIC_IO: Testing 8254 interrupt delivery
 APIC_IO: routing 8254 via pin 2
 Waiting 15 seconds for SCSI devices to settle
 SMP: AP CPU #1 Launched!
 sa0 at ahc0 bus 0 target 4 lun 0
 sa0: EXABYTE EXB-85058SQANXR1 0781 Removable Sequential Access SCSI-2
 device 
 sa0: 5.000MB/s transfers (5.000MHz, offset 11)
 da0 at ahc0 bus 0 target 3 lun 0
 da0: MICROP 3243-19   1128RA 28RA Fixed Direct Access SCSI-2 device 
 da0: 10.000MB/s transfers (10.000MHz, offset 15), Tagged Queueing
 Enabled
 da0: 4095MB (8388315 512 byte sectors: 255H 63S/T 522C)
 da1 at ahc1 bus 0 target 6 lun 0
 da1: SEAGATE ST39173W 5764 Fixed Direct Access SCSI-2 device 
 da1: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing
 Enabled
 da1: 8683MB (17783240 512 byte sectors: 255H 63S/T 1106C)
 da2 at ahc1 bus 0 target 8 lun 0
 da2: SEAGATE ST19171W 0023 Fixed Direct Access SCSI-2 device 
 da2: 40.000MB/s transfers (20.000MHz, offset 8, 16bit), Tagged Queueing
 Enabled
 da2: 8683MB (17783112 512 byte sectors: 255H 63S/T 1106C)
 changing root device to wd0s2a
 vinum: loaded
 vinum: reading configuration from /dev/da2s1e
 vinum: updating configuration from /dev/da1s1e
 (sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 10 0 0 1c 0 
 (sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0
 (sa0:ahc0:0:4:0): Invalid field in parameter list
 (sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 10 0 0 1c 0 
 (sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0
 (sa0:ahc0:0:4:0): Invalid field in parameter list
 (sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 10 0 0 1c 0 
 (sa0:ahc0:0:4:0): ILLEGAL REQUEST asc:26,0
 (sa0:ahc0:0:4:0): Invalid field in parameter list
 (sa0:ahc0:0:4:0): MODE SELECT(06). CDB: 15 0 0 0 c 0