Here is my additions to pccard.conf (Eiger 33.6 modem and AR-P500
ethernet cards). It would be nice to see it in pccard.conf.
#AR-P500 ethernet card
card IC-CARD IC-CARD
??? config? 0x20? ed0 15
??? insert? echo AR-P500 inserted
??? insert? /etc/pccard_ether ed0
??? insert?
Hi,
I initially intended to ask this to John Dyson, but I don't know how
to reach him. Maybe someone else on this list can anserw :)
I'm looking for documentations about the promise PCI IDE controller,
to add support for this in NetBSD. Does someone know how John got the
informations for the
(Send messages like this to -ports next time, please)
* I've noticed that as I'm constantly syncing my /usr/ports directory and
* upgrading programs, the old packages stay there. If I pkg_delete them and
* there's an unchanged file that exists in both the update and the original
then
*
Hello,
I am newbie to play with the tv tuner card (bt848). Can anyone show me
the steps. I had tried to config my kernel to include device brktr0 with
no success. The error was bt848_i2c.* file missing. Can anyone teach me.
thanks.
Clarence
To Unsubscribe: send mail to
On Feb 19, 2:15pm, Kenneth D. Merry wrote:
} Subject: Re: Slow seq. write on Seagate ST36530N
}
} The Write Cache Enable (WCE) bit is in mode page 8. To check it:
}
} camcontrol modepage -n da -u 1 -v -m 8
}
} To edit the mode page:
}
} camcontrol modepage -n da -u 1 -v -m 8 -e
To make this
Hello,
I encounctered an error when tried to config my kernel to include the
tv tuner card (bt878). The error was as followings. Any idea ?
My source tree is src-cur.3756. Thanks.
clarence
===Error ===
bkern/umoddi3.c swapkernel.c ioconf.c param.c vnode_if.c config.c
Here is my additions to pccard.conf (Eiger 33.6 modem and AR-P500
ethernet cards). It would be nice to see it in pccard.conf.
[.]
Done. send-pr is probably a better way to do this though ;-I
Sincerely,
Maxim Sobolev
--
Brian br...@awfulhak.org br...@freebsd.org br...@openbsd.org
So.. can anyone help? These folks are a vendor (www.nfr.net) who
are making a port to a FreeBSD platform. Thanks,
-- Yan
---BeginMessage---
i'm looking for someone who can answer some questions about
interrupt processing code in freebsd 3.0... not the stuff
after the SMP
The following script reliably causes FreeBSD 4.0-CURRENT (and 3.1-STABLE
as of today) to lookup. Shortly after this script is started, all disk activity
stops and any attempt to create new process causes system to freese. While in
DDB, ps command
shows, that all ten fgrep processes are sleeping
I've been unable to buildworld for a day or so now, much to my
frustration. I've tried recvsuping my /home/ncvs, as well as rechecking
out, etc. I get the following:
cd /usr/src/lib/libskey; /usr/obj/usr/src/tmp/usr/bin/make all;
/usr/obj/usr/src
/tmp/usr/bin/make -B install
cc -pipe
The program on the client side always freezes (top reports it's
STAT as 'D').
You need to pass the 'l' switch to ps and look at the 'wchan' column to
see where it's actually stuck.
This reminds me; do we have a utility to reference wmesg strings back
to the code that sets them, a la TAGS?
It seems Manuel Bouyer wrote:
Hi,
I initially intended to ask this to John Dyson, but I don't know how
to reach him. Maybe someone else on this list can anserw :)
I'm looking for documentations about the promise PCI IDE controller,
to add support for this in NetBSD. Does someone know how John
This occurs almost immediately after copying a file to an msdos fs. I can
provide more info if that is deemed useful.
FreeBSD jos.mp-c.com 4.0-CURRENT FreeBSD 4.0-CURRENT #3: Sat Feb 20 19:31:56
CET 1999 j...@jos.mp-c.com:/usr/src/sys/compile/JOS i386
Thanks,
--
Jos Backus
Søren Schmidt writes:
If you have questions, I might be able to answer, having just written
the support for our new ata/atapi system
Is this new ata/atapi system the rumored rewrite of the existing IDE
(i386/isa/wd.c, /pci/ide_pci.c) driver? How close are you to
completion?
I
RSI's IDL/ENVI product's license manager (lmgrd) previously (2.2.8)
ran just fine. (linux emulation) Now that I've upgraded to 3.1, it
exits with an abort trap, and the above message...
Any thoughts/suggestions would be REALLY welcome.
Thanks in advance,
Don
P.S. the library indicated
kernel code cvsup'd this morning, I believe.
FreeBSD sleipnir.watson.org 4.0-CURRENT FreeBSD 4.0-CURRENT #20: Mon Feb
22 11:53:53 EST 1999
rob...@sleipnir.watson.org:/usr/src/sys/compile/SLEIPNIR_AUDIT i386
panic(f01f13a7) at Debugger+0x37
worklist_remove(f0bd56a0) at worklist_remove+0x2a
It seems Andrew Gallatin wrote:
Søren Schmidt writes:
If you have questions, I might be able to answer, having just written
the support for our new ata/atapi system
Is this new ata/atapi system the rumored rewrite of the existing IDE
(i386/isa/wd.c, /pci/ide_pci.c) driver?
Looks like it may actually have been triggered by a bug in my kernel
auditing code, which turned out to be doing stuff when I didn't think it
should have. Sorry about that :-).
On Mon, 22 Feb 1999, Robert Watson wrote:
kernel code cvsup'd this morning, I believe.
FreeBSD sleipnir.watson.org
Søren Schmidt writes:
Is this new ata/atapi system the rumored rewrite of the existing IDE
(i386/isa/wd.c, /pci/ide_pci.c) driver? How close are you to
completion?
Yes. I have ATA disks running, and I'm close to having the ATAPI
part done also. So far things are looking very
you'll need to upgrade to a slightly newer than 3.1-RELEASE version
of the kernel and recompile. Anything newer than about Feb. 19 should
do. See freebsd-emulation lists last week for details.
Mark Blackman
In message pine.hpp.4.05.9902221104140.5225-100...@alpine.arc.nasa.gov, Don S
ullivan
I finally managed to extract a copy of the PCI-1220 chip documentation
from TI. If anyone needs a copy of this, e-mail me and I'll forward it
along. (Beware, it's a 3.5 MB PDF.) (If I get the okay from TI I'll
also put it up for FTP someplace.)
--lyndon
To Unsubscribe: send mail to
I am attaching my description of a similar problem/solution
as it directly addresses the problem and may be of interest
to many people. See below...
(Send messages like this to -ports next time, please)
* I've noticed that as I'm constantly syncing my /usr/ports directory and
*
It's online now at:
ftp://ftp.execmail.ca/pub/staff/lyndon/misc/PCI1220.pdf
--lyndon
To Unsubscribe: send mail to majord...@freebsd.org
with unsubscribe freebsd-current in the body of the message
The program on the client side always freezes (top reports it's
STAT as 'D').
You need to pass the 'l' switch to ps and look at the 'wchan' column to
see where it's actually stuck.
This reminds me; do we have a utility to reference wmesg strings back
to the code that sets them, a la
Bug in 3.1-release, upgrade to a 3.1-stable kernel.
RSI's IDL/ENVI product's license manager (lmgrd) previously (2.2.8)
ran just fine. (linux emulation) Now that I've upgraded to 3.1, it
exits with an abort trap, and the above message...
Any thoughts/suggestions would be REALLY welcome.
Last summer I encountered a P133 machine where linux detected the IDE
controller, but FreeBSD did not. I wrote it off as a fluke. I've now
come into possession of a stack of DECpc 433dxLP machines. These are
486/33 machines in a slimline desktop case. They have integrated IDE
controllers, and
1. Sorry for posting this to the Group.
2. Is there a problem with Unsubscribeing from majordomo on the FreeBSD
server?
have send this massabe and the auth code (after reciveing it)
3 times now and it is not unsubing me ;( i even try my email after the unsub
freebsd-current etc..
nothing.. just
Jos Backus wrote:
This occurs almost immediately after copying a file to an msdos fs. I can
provide more info if that is deemed useful.
I suspect your kernel compiled with INVARIANTS, you load msdosfs module
dynamically, and the module isn't compiled with INVARIANTS. If so,
don't do that. If
Hello,
I recenetly installed a multifunction tv card called FlyVideo (bt878) for
my i386. I run dmesg with following warning. Can anyone tell me how to fix
it ? Is there any document which guide the newbie in using the fxtv? Thanks.
Clarence
=== dmesg ===
bktr0: BrookTree 878 rev
On 22 Feb 1999, Joel Ray Holveck wrote:
The program on the client side always freezes (top reports it's
STAT as 'D').
You need to pass the 'l' switch to ps and look at the 'wchan' column to
see where it's actually stuck.
This reminds me; do we have a utility to reference wmesg
On the weekend I reported to hackers about problems experienced with
2.2-stable and RELENG-3 systems where I experienced files that
disappeared from cache and Mail directories that disappeared.
The RELENG-3 system had files affected with softupdates enabled.
The 2.2-stable system had
On Mon, 22 Feb 1999, Alexander N. Kabaev wrote:
The following script reliably causes FreeBSD 4.0-CURRENT (and 3.1-STABLE
as of today) to lookup. Shortly after this script is started, all disk
activity
stops and any attempt to create new process causes system to freese. While in
DDB, ps
On Mon, 22 Feb 1999, Alexander N. Kabaev wrote:
The following script reliably causes FreeBSD 4.0-CURRENT (and 3.1-STABLE
as of today) to lookup. Shortly after this script is started, all disk
activity
stops and any attempt to create new process causes system to freese. While
in
Luoqi Chen said:
This seems to be the good old vnode deadlock during vm_fault() that has been
reported a couple of times, and there's still no satisfactory solution to it:
fgrep does something like this: (don't ask me why)
addr = mmap(0, len, PROT_READ|PROT_WRITE, MAP_PRIVATE, fd,
Søren Schmidt said:
It should work, but the promise support in the old system is, well,
hacky at best. I'm not sure if Promise supports more than one card
at a time, but from looking at the chip specs, it should work just
fine, and if the hardware works, at least the new driver will support
35 matches
Mail list logo
