In what may have seemed a desperate move to try to find out where
the sound drivers decided to stop, I took a look at my config file.
I tried to change the attachment of the pcm device from isa? to nexus?,
trying to move it closer to the source of the interrupts. (This is with an
SB PCI 128)
When
Thank to all for replies. It seems that today current finaly have fixed (pccard
works
without patches).
Hovewer, sysinstall (and PicoBSD) broken with following symptoms:
cc -O2 -march=pentium -mpentium -pipe -Wall -I/usr/src/release/sysinstall/../../
gnu/lib/libdialog
:Matthew Dillon dil...@apollo.backplane.com wrote:
: I think the worst case you might see is on the order of 50,000 or so
: route entries. ...
: It take a phenominally stupid network setup to create more
: then that.
:With Path MTU Discovery (which is on by default), you effectively
:create a
Matthew Dillon dil...@apollo.backplane.com wrote:
I think the worst case you might see is on the order of 50,000 or so
route entries.
If you read the PR you'll see that we have over 70,000 routes on some
interfaces in our network, and we aren't doing multipath routeing.
(We have c.
Hi,
Has anyone tried having APM and SMP in the same kernel? It panic()'s mine :)
Basically the machine panics a few seconds after I do 'apmconf -e'. apm seems
to return normal values though.
I've attached a sample output from APM, dmesg and my kernel config.
I get a trap 12: page fault in
On Wed, May 05, 1999 at 08:49:53AM +0200, Erik H. Bakke wrote:
In what may have seemed a desperate move to try to find out where
the sound drivers decided to stop, I took a look at my config file.
I tried to change the attachment of the pcm device from isa? to nexus?,
trying to move it closer
(someone added: 'wi.' instead of 'wi.4')
Index: Makefile
===
RCS file: /home/ncvs/src/share/man/man4/man4.i386/Makefile,v
retrieving revision 1.104
diff -u -r1.104 Makefile
--- Makefile1999/05/05 07:36:57 1.104
+++ Makefile
Rev 1.67 of npx.c changed a #ifdef SMP to #ifdef 1, preventing the
test for the hardware coprocessor. This breaks support for 386 processors
without math coprocessors. Grrr.
--
John Birrell - j...@cimlogic.com.au; j...@freebsd.org
http://www.cimlogic.com.au/
CIMlogic Pty Ltd, GPO Box 117A,
Word broken with the following message:
=== usr.bin/gensetdefs
make: don't know how to make gensetdefs.1. Stop
To Unsubscribe: send mail to majord...@freebsd.org
with unsubscribe freebsd-current in the body of the message
Hi,
Has anyone tried having APM and SMP in the same kernel? It panic()'s mine :)
Basically the machine panics a few seconds after I do 'apmconf -e'. apm seems
to return normal values though.
I've attached a sample output from APM, dmesg and my kernel config.
I get a trap 12: page fault
On 05-May-99 Luoqi Chen wrote:
Also, nm kernel.debug | sort shows that 0xc0208a4c is in Xbpt
Are you sure it's in Xbpt? Xbpt has only 6 lines of code and none of them is
likely to generate a page fault. What's the address of symbol Xbpt?
Yeah, well, it didn't look likely to me either but..
Yeah, well, it didn't look likely to me either but.. :-/
Here is part of nm kernel.debug | sort
...
c0208a30 T Xnmi
c0208a3c T Xbpt
c0208a50 T Xofl
...
Did you actually boot from kernel.debug? If not, use the kernel you booted
from, the symbols should still be there.
I'll give it
At 23:18 05/05/99 +1000, John Birrell j...@cimlogic.com.au wrote:
Rev 1.67 of npx.c changed a #ifdef SMP to #ifdef 1, preventing the
test for the hardware coprocessor. This breaks support for 386 processors
without math coprocessors. Grrr.
... and for 486SXs. More Grrr.
--
Bob Bishop
Hello!
Here is a little patch for /usr/src/usr.sbin/pkg_install/info/perform.c
--- perform.c.orig Wed May 5 18:37:07 1999
+++ perform.c Wed May 5 19:16:36 1999
@@ -134,6 +134,9 @@
warnx(can't find package `%s' installed or in a file!, pkg);
return 1;
}
+
I'm trying to finish my modifications to the aio code, and have a few
questions I'm hoping someone would be willing to take time to answer.
First, I have modified the code to queue aio requests for sockets
differently. If the socket is soreadable/writeable, the operation happens
as before. If
c++ -Wall -o p5.x flight.o name.o passenger.o passengerlist.o plane.o
main.o
/usr/lib/libstdc++.so: undefined reference to `filebuf virtual table'
/usr/lib/libstdc++.so: undefined reference to `stdiobuf virtual table'
*** Error code 1
Stop.
That is the error I got when I tried to compile a
Hi,
Has anyone tried having APM and SMP in the same kernel? It panic()'s mine :)
Basically the machine panics a few seconds after I do 'apmconf -e'. apm seems
to return normal values though.
I've attached a sample output from APM, dmesg and my kernel config.
I get a trap 12: page fault
:Matthew Dillon dil...@apollo.backplane.com wrote:
:
:I think the worst case you might see is on the order of 50,000 or so
:route entries.
:
:If you read the PR you'll see that we have over 70,000 routes on some
:interfaces in our network, and we aren't doing multipath routeing.
:(We have
I just want to let know that sound works again for my workstation.
Thanks Doug, it was quite annoying to have icecast running but not to
hear anything I broadcast :-)
--
Vallo Kallaste
va...@matti.ee
To Unsubscribe: send mail to majord...@freebsd.org
with unsubscribe freebsd-current in the
Rev 1.67 of npx.c changed a #ifdef SMP to #ifdef 1, preventing the
test for the hardware coprocessor. This breaks support for 386 processors
without math coprocessors. Grrr.
It was also broken a month ago by changing TARGET_DEFAULT from
(MASK_NO_FANCY_MATH_387 | 0301) for gcc to 0301 for egcs.
Insufficient content. Please add more and try again.
An alert: VESA/SMP seems to be problematic again. For example, this
sequence reliably brings me down to the bios:
startx
ctl-alt-bksp
vidcontrol 132x42
startx
To Unsubscribe: send mail to majord...@freebsd.org
with unsubscribe
On Wed, 5 May 1999, Vallo Kallaste wrote:
I just want to let know that sound works again for my workstation.
Thanks Doug, it was quite annoying to have icecast running but not to
hear anything I broadcast :-)
Sorry the fix took so long :-).
--
Doug Rabson Mail:
On 05-May-99 Luoqi Chen wrote:
Also, nm kernel.debug | sort shows that 0xc0208a4c is in Xbpt
Are you sure it's in Xbpt? Xbpt has only 6 lines of code and none of them
is
likely to generate a page fault. What's the address of symbol Xbpt?
Yeah, well, it didn't look likely to me
Quoth Mike Smith on Wed, 5 May:
:
: Insufficient content. Please add more and try again.
Insufficient for what purpose? (Trying to understand what
additional information you would like...)
I've got a PR440FX dual running current (99.05.03) with an S3V
(Trio64) and XFree96 3.3.something
Quoth Mike Smith on Wed, 5 May:
:
: Insufficient content. Please add more and try again.
Insufficient for what purpose? (Trying to understand what
additional information you would like...)
In one place (one message), you need:
- what hardware
- what firmware
- instructions to repeat
Bruce Evans wrote:
Rev 1.67 of npx.c changed a #ifdef SMP to #ifdef 1, preventing the
test for the hardware coprocessor. This breaks support for 386 processors
without math coprocessors. Grrr.
It was also broken a month ago by changing TARGET_DEFAULT from
(MASK_NO_FANCY_MATH_387 | 0301) for
/usr/lib/libstdc++.so: undefined reference to `filebuf virtual table'
/usr/lib/libstdc++.so: undefined reference to `stdiobuf virtual table'
*** Error code 1
That is the error I got when I tried to compile a program for my C++
class.
You need to update your source. This was fixed last
+ if (!strcmp (log_dir, /var/db/pkg/.mkversion)) {
+ return 1;
+ }
I have a better patch for affected systems:
rm /var/db/pkg/.mkversion
:-)
That file should no longer exist.
- Jordan
To Unsubscribe: send mail to majord...@freebsd.org
with unsubscribe
On Sat, 1 May 1999, Jordan K. Hubbard wrote:
My suggestion would be to wait and see how bitkeeper pans out. Enough
people in the Linux camp have already looked at CVSup and gone ooh,
sexy! that I think there will already be significant pressure to
develop similar tools for the bitkeeper
Hello,
I had posted this message for a couple of weeks as I still didn't solve the
problem. The error was reported when I tried to make world. My system is
freebsd-current with ctm source upto src-cur.3858. The compiler is
egcs-1.1.2. I had tried cd /usr/src and make cleandir and make
On Wed, 5 May 1999, Brian Behlendorf wrote:
On Sat, 1 May 1999, Jordan K. Hubbard wrote:
My suggestion would be to wait and see how bitkeeper pans out. Enough
people in the Linux camp have already looked at CVSup and gone ooh,
sexy! that I think there will already be significant pressure
On 05-May-99 Luoqi Chen wrote:
My SMP vm sharing commit broke APM. Please try out this patch,
That patch seems to have fixed it! Great stuff :)
---
Daniel O'Connor software and network engineer
for Genesis Software - http://www.gsoft.com.au
The nice thing about standards is that there
are so
In a recent cvsup I got the newconfig updates. These are generally
working well and have solved a number of inelegancies in my setup.
However since this update the kernel isn't recognising the SMB device.
I have tried things like adding at pci? to the end of the controller
config lines to no
In article pine.bsf.4.10.9905051835560.388-100...@picnic.mat.net,
Chuck Robey chu...@picnic.mat.net wrote:
This discussion merits dropping, at least until someone rewrites
cvsup ctm. Don't hold your breath.
I haven't looked at bitkeeper, but I doubt anybody would have to
_rewrite_ CVSup.
In article 199905041841.laa00...@dingo.cdrom.com,
Mike Smith m...@smith.net.au wrote:
It seems that as of today -current pccard driver still isn't usable.
Kernel paniced after pccardd trying ifconfig ed0. Following is my dmesg,
interesting that pccardd complain about slot 0,1,2,3, while I
In message 05b301be975c$806d8880$6cb61...@scitec.com.au, John Saunders
wrote:
However since this update the kernel isn't recognising the SMB device.
I have tried things like adding at pci? to the end of the controller
config lines to no available. I've got an Intel chipset MB so I'm
using the
From: Takanori Watanabe takaw...@shidahara1.planet.sci.kobe-u.ac.jp
Subject: Re: Newconfig has silenced smb support
Date: Thu, 06 May 1999 12:21:27 +0900
$ Sorry, I'm not familiar with newconfig bus rewriting,though I subscribe
$ newconfig list.(;_;)
see URL:
Is it Ok, that this file is compiled into kernel even with no PCI
bus configured?
-mi
To Unsubscribe: send mail to majord...@freebsd.org
with unsubscribe freebsd-current in the body of the message
Apple's QuickTime 4 uses these protocols for streaming QuickTime, and I've
got users asking me if the FreeBSD NAT box can be made to handle it.
Looks like these protocols are new internet standards, has anyone
integrated them into libalias yet? If not I might give it a shot, but I'm
probably in
In message 199905060520.oaa83...@rina.naklab.dnj.ynu.ac.jp Seigo TANIMURA
writes:
: My box has got two PII-266's, the RAM of 256MB on ASUS P2L97-DS(BIOS ver is
1005).
: I used to apmconf(8) successfully on the kernel in 25th Apr. I have attached
: the config at the end of this mail.
Hi!
On Tue, 04 May 1999 01:32:01 -0600,
Warner Losh i...@harmony.village.org said:
imp In message 19990502075751n.tanim...@sakuramail.com Seigo TANIMURA writes:
imp : I traced to watch _apm_addr, which pointed the correct entry(0x78a8)
imp : in both situations. The only one difference was
I had tried cd /usr/src and make cleandir and make cleandir. It didn't
help. Any idea ? Thanks.
rm -rf /usr/src
cd /usr
cvs co src
Something is wrong with your tree. This output is very simular to what
you get when contrib/egcs/gcc/config/freebsd-native.h isn't being picked
up
42 matches
Mail list logo
