Re: EGCS, or EGCS?

1999-09-27 Thread Warner Losh
: David O'Brien is working on this now but I think he's : suffering from gcc-induced insanity. :-) Actually, I'd bet more on amd induced insanity rather than gcc. There have been too many problems with amd of late... Warner To Unsubscribe: send mail to [EMAIL PROTECTED] with

Re: Experimental ACPI driver.

1999-09-27 Thread Doug Rabson
On Mon, 27 Sep 1999, Mitsuru IWASAKI wrote: Hi, Mike. # I'm very happy because of your reply :) We wrote experimental ACPI driver for 4.0-CURRENT. This was just one week work so its functionallity is very very poor :-) but I think it is good idea to start with this for

Re: Loss of Functionality with newpnp

1999-09-27 Thread Doug Rabson
On Sun, 26 Sep 1999, Donald J . Maddox wrote: On Sun, Sep 26, 1999 at 12:29:46PM -0700, Mike Smith wrote: But we do have a working driver for the AWE64. Or rather, it worked fine before the new PnP code was comitted, now it doesn't. It seems to me that this indicates a deficiency

Re: New PnP code does not work for me(?)

1999-09-27 Thread Doug Rabson
On Sun, 26 Sep 1999, Donald J . Maddox wrote: I couldn't get my PnP Creative AWE64G to work with the new PnP code, so I tried compiling a kernel with pcm instead. All I get is: unknown0: Audio at port 0x220-0x22f,0x330-0x331,0x388-0x38b irq 5 drq 1,5 on isa0 unknown1: Game at port

Re: Loss of Functionality with newpnp

1999-09-27 Thread Amancio Hasty
It requires converting the ancient voxware driver to newbus which isn't really feasable. I am not sure about that ... The irq handling, card registration on the voxware is fairly straight forward. -- Amancio Hasty [EMAIL PROTECTED] To Unsubscribe: send mail to [EMAIL PROTECTED] with

Re: New ATA, HPT366 and UDMA66

1999-09-27 Thread Soren Schmidt
It seems Jeroen Ruigrok/Asmodai wrote: you know I have the possession of a development box with the HPT366, right? [well you should since I mailed you those timing-tables =P ] I know :) Anyways, as soon as I have enough cash again I will buy an /66 disk and stuff it on the free

Re: -current panic w/linux netscape

1999-09-27 Thread Mike Pritchard
:I finally saw my first -current panic in more than 5 months (not a bad :track record). : :I have a panic that I can duplicate with a 24 hour old "make world" :and a 4 hour old -current kernel. If I run the linux netscape (installed :from ports less than a week ago), the kernel panics in

ata-related crash following notebook resume

1999-09-27 Thread Francis Jordan
$apm -Z // going to sleep //... 10 hours later ... // key pressed ata0: resetting devices .. done ata1: resetting devices .. Fatal trap 12: page fault while in kernel mode fault virtual address = 0x4 fault code = supervisor read, page not present instruction pointer =

ATA Driver Problem

1999-09-27 Thread Jeremy L. Stock
I have two hard drives both Western Digital 8.4GB (primary master) 6.4GB (primary slave) and a CDROM as secondary master. The driver detects the 8.4GB and my cdrom but doesn't seem to see the second hd at all. I'd provide more info if I could but / lives on the second drive so I'm not sure if I

Re: Beneath The Planet Of The Mondays

1999-09-27 Thread John W. DeBoskey
-19990918-SNAP drwxr-xr-x 20 root wheel 1024 Sep 22 16:30 4.0-19990922-SNAP drwxr-xr-x 20 root wheel 1024 Sep 24 06:58 4.0-19990924-SNAP drwxr-xr-x 20 root wheel 1024 Sep 27 07:06 4.0-19990927-SNAP Unfortunately, I have no way of making these SNAPs publicly available due to the firewall I

Re: ATA Driver Problem

1999-09-27 Thread Soren Schmidt
It seems Jeremy L. Stock wrote: I have two hard drives both Western Digital 8.4GB (primary master) 6.4GB (primary slave) and a CDROM as secondary master. The driver detects the 8.4GB and my cdrom but doesn't seem to see the second hd at all. I'd provide more info if I could but / lives on the

ESS1869 logical ID

1999-09-27 Thread Wang Shidong
Following the suggestion of Mr. Peter Wemm, I manage to get my ESS1869 sound card work again. The attachments are the `dmesg' message and the `pnpinfo -v' output. I am grateful if the ID can be added. Thank you very much. regards, Wang Shidong Copyright (c) 1992-1999 The FreeBSD Project.

Re: ATA Driver Problem

1999-09-27 Thread Jeremy L. Stock
On Mon, 27 Sep 1999, Soren Schmidt wrote: It seems Jeremy L. Stock wrote: I have two hard drives both Western Digital 8.4GB (primary master) 6.4GB (primary slave) and a CDROM as secondary master. The driver detects the 8.4GB and my cdrom but doesn't seem to see the second hd at all. I'd

Re: ATA Driver Problem

1999-09-27 Thread Soren Schmidt
It seems Jeremy L. Stock wrote: Are you sure you have the latest versions of everything in /sys/dev/ata ?? There was a window of opportunity where I messed up unless ATA_STATIC_ID was defined... -Søren Fairly positive I have the latest versions. I cvsup'ed twice yesterday. I forgot to mention

Re: ATA Driver Problem

1999-09-27 Thread Jeremy L. Stock
On Mon, 27 Sep 1999, Soren Schmidt wrote: It seems Jeremy L. Stock wrote: Are you sure you have the latest versions of everything in /sys/dev/ata ?? There was a window of opportunity where I messed up unless ATA_STATIC_ID was defined... -Søren Fairly positive I have the latest versions. I

Re: ata driver question..

1999-09-27 Thread Viren R. Shah
"Soren" == Soren Schmidt [EMAIL PROTECTED] writes: Soren It seems Viren R. Shah wrote: I made world and build a new kernel on Friday the 24th, and later that evening, I got these: Sep 24 18:00:33 jabberwock /kernel: ata0-master: ad_timeout: lost disk contact - resetting Sep 24

Re: Loss of Functionality with newpnp

1999-09-27 Thread Jordan K. Hubbard
I'm just suggesting here that it would be nice if the authors of this code would make it _equally functional_ to what was removed. It's not nice to remove functionality unconditionally and then provide no replacement at all... That work is underway, and something to understand about -current

Re: Loss of Functionality with newpnp

1999-09-27 Thread Rodney W. Grimes
I'm just suggesting here that it would be nice if the authors of this code would make it _equally functional_ to what was removed. It's not nice to remove functionality unconditionally and then provide no replacement at all... That work is underway, and something to understand about

Re: New PnP code does not work for me(?)

1999-09-27 Thread Warner Losh
In message [EMAIL PROTECTED] Doug Rabson writes: : case 0x31008c0e: /* CTL0031 */ : case 0x41008c0e: /* CTL0041 */ : case 0x42008c0e: /* CTL0042 */ : + case 0x44008c0e: /* CTL0044 */ : case 0x45008c0e: /* CTL0045 */ What is CTL0043? Seems like a logical progression

Re: Loss of Functionality with newpnp

1999-09-27 Thread Jordan K. Hubbard
If that was only true. Or should I ask why didn't CAM from -3.3 get reverted to the old scsi code before 3.3 was released. I have seen no less than 2, and perhaps 3 people try to get cards that did work under pre-CAM 3.x working under post-CAM 3.x. I know this is a slippery slope, but it

No Subject

1999-09-27 Thread RaDyX
auth fdfda9f6 unsubscribe freebsd-current [EMAIL PROTECTED] auth 8a3cc747 unsubscribe cvs-all [EMAIL PROTECTED] To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message

Re: On hub.freebsd.org refusing to talk to dialups

1999-09-27 Thread Wilko Bulte
As Jonathan M. Bresler wrote ... stopping chat on the tech lists is an open research project ;) Very much so. It will most likely require GenuineIntelligence (as opposed to AI or the organic, carbon based variant we all know too well ;-) GenuineIntelligence is not scheduled for release for

Another tty related patch for review/test

1999-09-27 Thread Poul-Henning Kamp
http://phk.freebsd.dk/tty -- Poul-Henning Kamp FreeBSD coreteam member [EMAIL PROTECTED] "Real hackers run -current on their laptop." FreeBSD -- It will take a long time before progress goes too far! To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe

Re: EGCS, or EGCS?

1999-09-27 Thread Ollivier Robert
According to Peter Jeremy: That's the way I remembered things. What threw me is that I currently have two _different_ gcc directories, both claiming to be EGCS 1.1.2, and both being updated. The main reason is that we don't lose history with the directory change. At first we had contrib/gcc,

Re: Another tty related patch for review/test

1999-09-27 Thread Julian Elischer
I was concerned about the extra checks by devices that have control devices. But a quick sample of drivers indicates that the test for si_tty != NULL catches those. I haven't done an exhaustive test, but it looks like these changes are functionally equivalent to old code assuming that si_tty is

Re: System crash on vinum start

1999-09-27 Thread Jeffrey J. Mountin
At 01:05 PM 9/27/99 -0400, Brad Chisholm wrote: Well, I believe I discovered the source of my problem. It turns out that I did not have the correct devices configured in /dev for the component drives. I had da[0-3]e, but not da[0-3]s1e. The documentation seemed to indicate that the da?s1?

Re: New PnP code does not work for me(?)

1999-09-27 Thread Donald J . Maddox
God knows, I'll second that one... :-) Hear, hear! On Sun, Sep 26, 1999 at 07:39:27PM -0700, Darryl Okahata wrote: I want to publicly thank Peter Wemm for posting a reply that is courteous, informative, and useful. Recently, there has been too much noise in this and other FreeBSD

bktr

1999-09-27 Thread Kenneth Wayne Culver
I'm happy to report that for my WinTV card, the bktr drivers are working well with the latest changes. Keep up the good work. = | Kenneth Culver | FreeBSD: The best OS around.| | Unix Systems Administrator | ICQ

Re: System crash on vinum start

1999-09-27 Thread Greg Lehey
On Monday, 27 September 1999 at 15:37:30 -0500, Jeffrey J. Mountin wrote: At 01:05 PM 9/27/99 -0400, Brad Chisholm wrote: Well, I believe I discovered the source of my problem. It turns out that I did not have the correct devices configured in /dev for the component drives. I had da[0-3]e,

Re: Demand-loaded network ifs and bpf

1999-09-27 Thread John-Mark Gurney
Donald J . Maddox scribbled this message on Sep 26: I see that support has been added for demand-loading network if drivers. I seem to recall that the last time I tried using network drivers as klds, nothing that required bpf to work was functional anymore, because bpf required that the

Re: New PnP code does not work for me(?)

1999-09-27 Thread Andrew Sparrow
: case 0x31008c0e: /* CTL0031 */ : case 0x41008c0e: /* CTL0041 */ : case 0x42008c0e: /* CTL0042 */ : + case 0x44008c0e: /* CTL0044 */ : case 0x45008c0e: /* CTL0045 */ What is CTL0043? Seems like a logical progression to me :-)

Re: Demand-loaded network ifs and bpf

1999-09-27 Thread Donald J . Maddox
Thanks for the info. I do read the commit logs, and I was aware of this commit; however, it's not entirely clear to me if this commit resolves the issue I'm talking about. The problem, as I recall, had to do with the bpf pseudo-device attaching to devices _only_ at boot time, so it would not

440fx builtin pnp `soundcard' doesn't work anymore under current

1999-09-27 Thread Bakul Shah
Running rvplayer crashes the system. Catting a small .au file works but a large one panics the system so I think the problem may just be the drq difference. I know a number of people in the FreeBSD crowd have this system (a Toshiba Equium 6200M -- a `good' buy 15 months back) so this can't be

Re: System crash on vinum start

1999-09-27 Thread Greg Lehey
On Tuesday, 28 September 1999 at 12:59:34 +1000, Peter Jeremy wrote: On Tue, Sep 28, 1999 at 09:11:31AM +1000, Greg Lehey wrote: Good software shouldn't panic. I wish _I_ could convince some people of this :-(. Most certainly is. Could use the functionality to add to a plex's size for

Program breaks with stable-current (__builtin_apply)

1999-09-27 Thread Mike Heffner
hi, i just recently upgraded from stable-current successfully. a program i use often is unable to run any more though. the program dies in the following spot: __builtin_apply( serv-cb, __builtin_apply_args(), MAX_DIM_ARGS_LIST)); it dies with a signal 8, floating point exception. browsing over

just found this

1999-09-27 Thread Kenneth Culver
Check this out, if anyone is intrested. I found this on packetstorm.securify.com tonight. Any ideas?? [Resending once, since it's been 10.5 days...] Here's an interesting denial-of-service attack against FreeBSD =3.0 systems. It abuses a flaw in the `new' FreeBSD vfs_cache.c; it has no way

Re: just found this

1999-09-27 Thread Alfred Perlstein
this was fixed in the final hours before 3.3-release. http://www.freebsd.org/cgi/cvsweb.cgi/src/sys/kern/vfs_cache.c 1.38.2.3 Thu Sep 16 2:02:15 1999 UTC by alfred CVS Tags: RELENG_3_3_0_RELEASE; Branch: RELENG_3 Diffs to 1.38.2.2 Limit aliases to a vnode in the namecache to a sysctl

Re: System crash on vinum start

1999-09-27 Thread Jeffrey J. Mountin
At 08:41 AM 9/28/99 +0930, Greg Lehey wrote: It has changed (again). And the preferred method is... a) /dev/da0 b) /dev/da0s1 c) /dev/da0s1e (-current and -stable I hope :) Not to surprising that it paniced with what appeared to be a "dedicated" disk (ie da0e). It's surprising. Good