I CVSup'd this morning around 05:00 BST, then make -DCLOBBER world /
mergemaster / sh MAKEDEV all / buildkernel / installkernel. My Adaptec
2940UW is no longer probed at boot time.
/boot/device.hints contains the proper entries and a pnpscan -v detects
a SCSI controller.
Attached are my
On Fri, 1 Sep 2000, Chris D. Faulhaber wrote:
On Fri, 1 Sep 2000, Justin Ovens [[EMAIL PROTECTED]] wrote:
What would cause freebsd -current to lock up when i telnet, ftp, or ssh to
it? Somthing with inetd?
chgsbsize breakage from a few days ago?
Question regarding this:
Have a
From the keyboard of Wes Peters:
I just updated my sources after a few days and reconfiged, recompiled booted
a machine with with a NCR810a card. It panicked partway through the boot
messages (prior to mounting filesystems) saying that it couldn't allocate
space for sym1's data. The
I just installed 8-31 current on my Toshiba 1605 Laptop and I was goofing
off in the Keyboard Mapping menu and noticed something. As you go half way
down, then up the menu starts to print something like this:
english
english2()glish2 ---going ^up^
english3()glish3 ---halfway
In message [EMAIL PROTECTED], John Baldwin writes:
Poul-Henning Kamp wrote:
If I boot this machine on a -current kernel, it doesn't find the
fxp#'s at all:
Do you have Peter's latest commits to pci/pci.c pci/pcisupport.c and
i386/isa/pcibus.c? Without that, mulitple PCI busses is b0rked on
Poul-Henning Kamp wrote:
In message [EMAIL PROTECTED], John Baldwin writes:
Poul-Henning Kamp wrote:
If I boot this machine on a -current kernel, it doesn't find the
fxp#'s at all:
Do you have Peter's latest commits to pci/pci.c pci/pcisupport.c and
i386/isa/pcibus.c? Without that,
What makes you say that? Are you seeing the problem as well?
Not definitively, but many others have also complained since it went
in. It's one of the things Mark is trying to address by moving it to a
kthread.
It _is_ most likely the random device, and I have a kthread improvement;
On Fri, Sep 01, 2000 at 03:33:34PM -0700, Matthew Jacob wrote:
mcclock isn't at 112 on the alpha.
Oops (*blush*).. these are decimal...
Maybe a stupid question, but why are these values reported in decimal in the
first place?
Maybe. It's also not clear to me whether my current
Blaz Zupan wrote:
Has anyone else noticed savecore core dumping on a bus error? I think it
started on my yesterday's make world. Redid the make world today with the
latest sources and it's still doing it. Leaves a nice savecore.core in /.
A while ago, passwd was dumping core on a bus error,
Alright, I forgot to mention what soundcard I have before, so here goes:
I have an es1371 card. To repeat the problem, with a day-old -current the
mixer doesn't work. I have the sound drivers loaded as a module.
Ken
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe
Has anyone else noticed savecore core dumping on a bus error? I think it
started on my yesterday's make world. Redid the make world today with the
latest sources and it's still doing it. Leaves a nice savecore.core in /.
Try the enclosed patch.
Works now. Thanks!
Blaz Zupan, Medinet
[Dell XPS B800 w/ 3c905C-TX and Aureal Vortex 8830 soundcard]
I tried to upgrade my -current today. It had been running a -current
from Aug 14. However, neither my NIC (xl0) nor my soundcard (pcm0)
were detected on boot. All the relevant drivers are compiled into the
kernel, but the PCI code
Original Message
On 9/2/00, 6:29:32 AM, Kenneth Wayne Culver [EMAIL PROTECTED] wrote
regarding mixer no longer works :
In -CURRENT cvsupped as of today, the mixer no longer works. anything
that
tries to access the mixer just says "Operation not permitted"
ME TOO type="*sigh*"
In -CURRENT cvsupped as of today, the mixer no longer works. anything that
tries to access the mixer just says "Operation not permitted"
using devfs?
-cg
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
Original Message
On 9/2/00, 5:14:39 PM, Kenneth Wayne Culver [EMAIL PROTECTED] wrote
regarding forgot info on soundcard:
Alright, I forgot to mention what soundcard I have before, so here
goes:
I have an es1371 card. To repeat the problem, with a day-old -current
the
mixer doesn't
In -CURRENT cvsupped as of today, the mixer no longer works. anything
that
tries to access the mixer just says "Operation not permitted"
using devfs?
i just committed a fix; devfs was not the problem.
-cg
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe
Anyone else seen this with SMP and latest as of maybe early yesterday morning?
done
panic: vinvalbuf: dirty bufs
mp_lock = 0001; cpuid = 0; lapic.id =
Debugger("panic")
Stopped at Debugger+0x34: movb$0,in_Debugger.591
db
db t
Debugger(c0267f32)
FYI,
Because it is still in experimental phase, more developers are needed.
To avoid making duplicate effort, I'd like to propose that having an
announcement in -current (or -hackers?) ML first then starting your
development.
I've just add `Who is woking on what' section in ACPI for FreeBSD
Looks like 3dfx linux emulation aren't mixing well. Since I don't
use 3dfx, I turn off that module.
What we really need is a system that lets me specify *which* modules
to build. Hmmm.
mike
=== 3dfx
make: don't know how to make @/i386/linux/linux_ioctl.h. Stop
*** Error code 2
On Thu, 31 Aug 2000, Evan Tsoukalas wrote:
On Thu, Aug 31, 2000 at 02:08:28PM -0700, Doug White wrote:
This is usually indicitive of bad memory. Replace your memory modules.
I've seen some people have those same errors on the lists before,
so I did; twice. First, with a replacement
I recently received the 4.1 subscription CD.
I have an old machine doing only ppp and serving a printer on a home
lan.
So, why not upgrade to 4.1? Get into this century.
Wrong!
It appears from GNATS that the DEC EtherWORKS 2 and DEC EtherWORKS 3
NIC's no longer work with no prospect of it
pci50: physical bus=-1061225984
A little dubious, I think. Below is the dmesg(8) output from
kernel.old, my last good kernel built yesterday, booted with ``boot
-v''.
The enclosed patch might be relevant. I got similar problems without
it.
Index: pcisupport.c
Nope, I'm not using devfs.
=
| Kenneth Culver | FreeBSD: The best NT upgrade|
| Unix Systems Administrator | ICQ #: 24767726 |
| and student at The | AIM: muythaibxr |
|
Has anyone else noticed savecore core dumping on a bus error? I think it
started on my yesterday's make world. Redid the make world today with the
latest sources and it's still doing it. Leaves a nice savecore.core in /.
Blaz Zupan, Medinet d.o.o, Linhartova 21, 2000 Maribor, Slovenia
E-mail:
24 matches
Mail list logo