In article [EMAIL PROTECTED]
Peter Wemm [EMAIL PROTECTED] writes:
I can understand if you do not like to call your cbus hardware ISA
devices, but also consider that on most pc-at hardware there are no ISA
devices either.
These are completely different. All PC-98 machines don't have ISA
On Mon, 17 Feb 2003, Takahashi Yoshihiro wrote:
These are completely different. All PC-98 machines don't have ISA
devices and buses at all, but a little old PC-AT machines have ISA
buses. And, even if the PC-AT machine does not have ISA buses, it has
PCI-ISA bridge.
This is semantics; like
anyone have an answer?
Index: sparc64/sparc64/exception.S
===
RCS file: /home/ncvs/src/sys/sparc64/sparc64/exception.S,v
retrieving revision 1.59
diff -u -r1.59 exception.S
--- sparc64/sparc64/exception.S 26 Jan 2003 03:38:30 -
oh yeah I also tried line 2319 as lduw as well (my guess)
On Mon, 17 Feb 2003, Julian Elischer wrote:
anyone have an answer?
Index: sparc64/sparc64/exception.S
===
RCS file: /home/ncvs/src/sys/sparc64/sparc64/exception.S,v
On Sun, Feb 16, 2003 at 09:03:59PM +0900, Makoto Matsushita wrote:
If you are serious about this, attached below is a current kernel
configuration file for kern.flp kernel named BOOTMFS (attention: it is
only just for boot floppy, not GENERIC nor default installed kernel).
machine i386
Gang,
I got the following on my -current machine (recompiled around 23:00 PST)
with my home-directory across NFS and gnome2 busy filling memory when
logging in. The previous kernel had the extra protection before starting
init(8). Related? :-)
athlon% sudo more info.0
Good dump found on device
riccardo Is this stuff really needed on a boot floppy? Maybe we can leave
riccardo only I486_CPU? What about removing also device eisa and/or bpf?
riccardo (I'm just curious, don't expect to be an expert :-)
The bpf is required for DHCP client. We cannot remove it, or cannot
network install
On Sun, Feb 16, 2003 at 11:20:13PM +1100, Alastair D'Silva wrote:
I've had a weird problem since installing 5-CURRENT on my gateway,
traffic originating from the gateway is fine, as is UDP from the
unregistered network behind it, however, TCP traffic from the
unregistered network is dropped.
On Mon, Feb 17, 2003 at 06:42:45PM +0900, Makoto Matsushita wrote:
riccardo Is this stuff really needed on a boot floppy? Maybe we can leave
riccardo only I486_CPU? What about removing also device eisa and/or bpf?
riccardo (I'm just curious, don't expect to be an expert :-)
The bpf is
H. I think that my 5.0R installation has self destructed.
Background:
* 60GB toshiba disk with two active OS partitions (win2k, freebsd)
booted with ranish
* Freebsd partition has 4 slices, swap (ca. 2GB), root (250MB), var
(250MB), usr (ca. 6GB), other msdosfs partitions are occassionally
Hi,
Makoto Matsushita schrieb:
Note that both devices cannot load as a kernel module at this time;
removing these devices means that we cannot use them for installation.
what about moving legacy drivers (like EISA) to a kern_legacy.flp?
bye,
--
---
Thus spake Paul A. Mayer [EMAIL PROTECTED]:
I'm presently running fsck_ffs from a live cd. It fsck'ed / with some
complaints about an unreadable sector. It's now on /var and reporting
vast, vast numbers of sectors as unreadable, with UNEXPECTED SOFT
UPDATE INCONSISTENCY. I've not visited
There were some ATA complaints, (don't recall exactly what though it was
clear that there were read errors), when attempting to boot the system
off the HD. I don't recall medium error there, and have not seen it
in fsck_ffs booted from the live cd. The sector numbers I'm seeing seem
to be in
A busy day, saw myself, jon and Jeff working on varous tasks.
We have the meat of signal delivey to threads in place (work by Jon and
Jeff) though there may be soem corner cases to work out.
We ahve also reapplied David Xu's patches (with soem minor exceptions
in the profiling code that I amstill
Le 2003-02-16, Chris BeHanna écrivait :
Do you use cvs2p4? How about going in the other direction (from your
local branches back to the trunk?)
VCP is also a nice solution for moving changes across CVS and Perforce
repositories. I use it to update a read-only CVS pserver view of a
project
In message [EMAIL PROTECTED], Dag-Erling Smorgrav writes:
The clock on my ASUS P5A still runs at double speed unless I have
debug.acpi.disable=timer in loader.conf (as it has for as long as
we've had ACPI support). Do any ACPI wizards have any suggestions as
to how I could track down the cause of
Takahashi Yoshihiro [EMAIL PROTECTED] writes:
I have had some questions like Does PC98 have ISA bus? or Why PC98
uses ISA driver?. To clear these questions and problems, I think
that adding separated cbus driver is better way.
So you're duplicating a large amount of existing, working code
On Sun, Feb 16, 2003 at 09:05:49PM +0100, Hartmann, O. wrote:
Hello.
My question is very simple.
Does FreeBSD, either 4.7/4.8 or 5.0 support SecureRPC, especially SecureNFS?
I found the keyserv facility, installed the databases and read some note
in mknetid(8):
-n netid_file
On Mon, Feb 17, 2003 at 17:39:55 +1100, Tim Robbins wrote:
variant (which generates bad quality ones), the only problem remains is
first value monotonically increased with the seed.
Here's an interesting picture of that: http://people.freebsd.org/~tjr/rand.gif
Nothing surprising here.
On Mon, Feb 17, 2003 at 04:40:48PM +1100, Tim Robbins wrote:
I disagree. It's safe to use rand() in games and in certain kinds of
simulations when you don't care that the distribution isn't quite
uniform,
Safe, maybe. But I think it still shouldn't be used.
See my posting of two years ago:
Makoto Matsushita wrote:
riccardo Is this stuff really needed on a boot floppy? Maybe we can leave
riccardo only I486_CPU? What about removing also device eisa and/or bpf?
riccardo (I'm just curious, don't expect to be an expert :-)
The bpf is required for DHCP client. We cannot remove
Bernd Walter wrote:
On Sun, Feb 16, 2003 at 11:20:13PM +1100, Alastair D'Silva wrote:
I've had a weird problem since installing 5-CURRENT on my gateway,
traffic originating from the gateway is fine, as is UDP from the
unregistered network behind it, however, TCP traffic from the
Hi,
It seems that disklabel is currently broken on -current. In `read' mode it
reports incorrect information about disk layout:
root@notebook# disklabel -r ad0s1
# /dev/ad0s1c:
type: unknown
disk: amnesiac
label:
flags:
bytes/sector: 512
sectors/track: 63
tracks/cylinder: 240
sectors/cylinder:
OK, I've played around with my kernel trying to figure out what causes
this. The one thing I know is that it disappears if I leave pcm out
of my kernel, but I don't think pcm is the culprit. Since the address
at fault is constant, I've added code to mtrash_[cd]tor() which calls
Dag-Erling Smorgrav [EMAIL PROTECTED] writes:
Any suggestions as to how I can figure out who used that block of
memory before it was allocated to the ess driver?
I threw in a call to Debugger(), but...
mtrash_dtor(0xfc7b6000, 8192, 0)
here's the culprit!
Stopped at
In message [EMAIL PROTECTED], Maxim Sobolev writes:
Hi,
It seems that disklabel is currently broken on -current. In `read' mode it
reports incorrect information about disk layout:
Don't use the -r option and you will be ok.
Poul-Henning
root@notebook# disklabel -r ad0s1
--
Poul-Henning Kamp
ticso What about some uncommon ISA scsi controllers like stg and ncv?
ticso Both are available as a module.
Maybe it's ok, do you know whether stg/ncv kernel modules work as they
should be?
-- -
Makoto `MAR' Matsushita
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe
We (at least, I) don't know exactly that which options and/or drivers
can be picked out from the kernel for kern.flp... maybe it's chance to
find out all of them.
jhay What about moving the slip driver (sl) to the drivers floppy? I know its
jhay not much, but it is enough to make things fit on
On Mon, Feb 17, 2003 at 11:37:11PM +0900, Makoto Matsushita wrote:
ticso What about some uncommon ISA scsi controllers like stg and ncv?
ticso Both are available as a module.
Maybe it's ok, do you know whether stg/ncv kernel modules work as they
should be?
No - I just can say that they
Maybe it's ok, do you know whether stg/ncv kernel modules work as they
should be?
ticso No - I just can say that they got build on my system.
ticso I can't test either, because I don't have such cards.
Ah, ok, thank you. Anybody in this list knows?
-- -
Makoto `MAR' Matsushita
To
Hi,
This is a simple proposal to add support for NT MD4 password hashes to
crypt(3).
NT MD4 password hashes are more insecure than the standard FreeBSD MD5
based password crypt or the much more stronger blowfish based
encryption. Why are you/we so nut to use NT password hashes? The answer
is
On Thu, Feb 13, 2003 at 04:36:20PM -0800, Scott Long wrote the words in effect of:
- Benchmarks and performance testing - Having a source of reliable and
useful benchmarks is essential to identifying performance problems
and guarding against performance regressions. A 'performance team'
[EMAIL PROTECTED] wrote:
In message [EMAIL PROTECTED], Maxim Sobolev writes:
Hi,
It seems that disklabel is currently broken on -current. In `read' mode it
reports incorrect information about disk layout:
Don't use the -r option and you will be ok.
Thank you Poul for your very-very
[EMAIL PROTECTED] writes:
In message [EMAIL PROTECTED], Maxim Sobolev writes:
It seems that disklabel is currently broken on -current. In `read' mode it
reports incorrect information about disk layout:
Don't use the -r option and you will be ok.
Then how are we supposed to initialize
In message [EMAIL PROTECTED], Dag-Erling Smorgrav writes:
[EMAIL PROTECTED] writes:
In message [EMAIL PROTECTED], Maxim Sobolev writes:
It seems that disklabel is currently broken on -current. In `read' mode it
reports incorrect information about disk layout:
Don't use the -r option and you
[EMAIL PROTECTED] writes:
In message [EMAIL PROTECTED], Dag-Erling Smorgrav writes:
Then how are we supposed to initialize devices which don't already
have a label?
That is the only valid use of -r, and it should be implicit in that case.
Thanks for the clarfication; I thought you were
Dag-Erling Smorgrav writes:
Dag-Erling Smorgrav [EMAIL PROTECTED] writes:
Any suggestions as to how I can figure out who used that block of
memory before it was allocated to the ess driver?
I threw in a call to Debugger(), but...
mtrash_dtor(0xfc7b6000, 8192, 0)
here's
Andrew Gallatin [EMAIL PROTECTED] writes:
Can you look at the registers and match $ra with a line number using
addr2line or gdb? (sorry, forgot if ddb can even look at registers)
Uh, I know *where* it stops since I added the call to Debugger() in
the first place. The problem is figuring out
Dag-Erling Smorgrav writes:
Andrew Gallatin [EMAIL PROTECTED] writes:
Can you look at the registers and match $ra with a line number using
addr2line or gdb? (sorry, forgot if ddb can even look at registers)
Uh, I know *where* it stops since I added the call to Debugger() in
the
c++ -O2 -pipe -fno-builtin -march=k6-2 -g -I/usr/src/gnu/usr.bin/gperf/../../
../contrib/gperf/lib -I/usr/src/gnu/usr.bin/gperf -o gperf bool-array.o gen-per
f.o hash-table.o iterator.o key-list.o list-node.o main.o new.o options.o read-l
ine.o trace.o vectors.o version.o hash.o getopt.o
I have been looking into helping with the C99 conformance stuff and I wondered if the
following would be helpful?
http://posixtest.sourceforge.net/
I am sure some of you knew about this... I guess I wonder if a link on the C99 web page
is appropriate under resources and links.
Also in my
In message: [EMAIL PROTECTED]
Takahashi Yoshihiro [EMAIL PROTECTED] writes:
: In article [EMAIL PROTECTED]
: Peter Wemm [EMAIL PROTECTED] writes:
:
: I can understand if you do not like to call your cbus hardware ISA
: devices, but also consider that on most pc-at hardware there are
Alex Rousskov wrote:
Polygraph is relatively easy to setup on FreeBSD for standard tests,
using two PCs. Testing with more PCs, with non-standard workloads,
and/or on a regular basis requires writing scripts and can get pretty
evolved (which let's us sell a pre-configured appliance that does
Hello!
Using a kernel from last friday, I'm not able to get /dev/smb working. I've
added these options to my kernel config:
device smbus
device intpm
device alpm
device ichsmb
device viapm
device amdpm
device nfpm
device
In article local.mail.freebsd-current/[EMAIL PROTECTED] you write:
Alex Rousskov wrote:
One issue I have with Polygraph is that it intentionally works
for a very long time to get worst case performance out of caches;
basically, it cache-busts on purpose. Then the test runs. This
seems to be an
In message: [EMAIL PROTECTED]
Mathieu Arnold [EMAIL PROTECTED] writes:
: This does not answer to the question :)
p4 changes -m 10
Change 25340 on 2003/02/17 by importer@updater 'Import at Mon Feb 17 11:05:36 P'
...
importer is the magic behind the scenes.
Warner
To Unsubscribe:
Jonathan Lemon wrote:
In article local.mail.freebsd-current/[EMAIL PROTECTED] you write:
Alex Rousskov wrote:
One issue I have with Polygraph is that it intentionally works
for a very long time to get worst case performance out of caches;
basically, it cache-busts on purpose. Then the test
--En cette belle journée du lundi 17 février 2003 12:11 -0700
-- M. Warner Losh [EMAIL PROTECTED] écrivait :
| In message: [EMAIL PROTECTED]
| Mathieu Arnold [EMAIL PROTECTED] writes:
| : This does not answer to the question :)
|
| p4 changes -m 10
| Change 25340 on 2003/02/17 by
I'm running 5.0-p1, cvsupped yesterday. I've just gone back to
5.0-RELEASE from -CURRENT because I found applications had started
crashing quite a lot. I rebuilt the world, kernel and all my applications. Because
I could do with the disk space back from the src, doc and ports
directories, I
even with this configuration (see below) in place (with no application to
catch the diverted packets), I can still pass packets through that should
match the divert rule. If I change the divert rule to:
00150 divert ip from any to any
then I can still send and receive packets through the
Just committed /usr/src/libexec/rtld-elf/rtld.c v1.76 should fix that.
--
Alexander Kabaev
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
On 2003-02-17 11:47, Paul A. Mayer [EMAIL PROTECTED] wrote:
There were some ATA complaints, (don't recall exactly what though it
was clear that there were read errors), when attempting to boot the
system off the HD.
Were they fsbn errors? The disk that caused the following in my
/var/log a
On Mon, 17 Feb 2003, Jake Burkholder wrote:
Apparently, On Mon, Feb 17, 2003 at 05:35:09PM +1100,
Bruce Evans said words to the effect of;
... Also, ast() doesn't
have access to the frame, and there is no macro like CLKF_PC() for
general frames. This probably doesn't matter much,
On Sun, 16 Feb 2003, Julian Elischer wrote:
On Mon, 17 Feb 2003, Bruce Evans wrote:
On Sun, 16 Feb 2003, Julian Elischer wrote:
In addupc_intr, if the increment cannot be done immediatly, the addres
to increment the count for is stored and the increment is done later at
ast or
Can you explain how fuswintr() and suswintr() work on sparc64's? They
seem to cause traps if the user counter is not mapped, and I can't see
where the traps are handled. ia64/trap.c has a comment about where these
traps are handled, but has dummies for fuswintr() and suswintr() so the
Matthew N. Dodd [EMAIL PROTECTED] wrote:
My only outstanding issue is that I can't suspend if an application
is holding /dev/dsp or /dev/audio open.
Can you suspend from within graphics mode? I can't seem to do that,
neither with APM nor with ACPI. In some case, i've seen four
horizontal
Darren Pilgrim [EMAIL PROTECTED] wrote:
The above practices have worked fine for a long time in 4.x and still do
even in 4.7p4, which is on this same machine.
Get Matthew N. Dodd's patch at:
ftp://ftp.jurai.net/users/winter/patches/geom-foot.patch
(Hint: sysctl
In message [EMAIL PROTECTED], Joerg Wunsch writes:
Darren Pilgrim [EMAIL PROTECTED] wrote:
The above practices have worked fine for a long time in 4.x and still do
even in 4.7p4, which is on this same machine.
Get Matthew N. Dodd's patch at:
Hi,
During my firewall configuration I noticed strange behaviour of ipfw option
uid.
ip_fw2.c:1513
#if __FreeBSD_version 500034
#define socheckuid(a,b) ((a)-so_cred-cr_uid == (b))
#endif
if (cmd-opcode == O_UID) {
match =
On Mon, Feb 17, 2003 at 11:47:32PM +0100, Wiktor Niesiobedzki wrote:
[...]
There is an obvious mistake in patch (or change in ip_fw2.c should
be considered).
Cheers,
Wiktor Niesiobedzki
===
RCS file: sys/kern/uipc_socket.c,v
Hello!
I've been experimenting quite a bit with the new ACPI stuff from
5.0-release. I can reliably hang my box using acpiconf -s 3, both from
X and the console. In X, upon wakeup, the screen is trashed with color
strips. In the console, I can actually get some interaction back, but
the whole
Christian Gusenbauer wrote:
Hello!
Using a kernel from last friday, I'm not able to get /dev/smb
working. I've added these options to my kernel config:
device smbus device intpm device alpm
device ichsmb device viapm device amdpm
device
Howdy all,
I have a situation on my FreeBSD 5.0-CURRENT #7: Thu Jan 23 14:12:15 CST 2003 box.
After the box has been up for approx 15 days with X running, X suddenly 'freezes' and
the
root window becomes corrupt (looks distorted and getting eaten away). I can swtich to
the
Virtual Console and
On Mon, Feb 17, 2003 at 06:03:08PM -0500, The Anarcat wrote:
Hello!
I've been experimenting quite a bit with the new ACPI stuff from
5.0-release. I can reliably hang my box using acpiconf -s 3, both from
X and the console. In X, upon wakeup, the screen is trashed with color
strips. In the
In 4.7 I found pkg_version -c usefull to get a list of commands to update
/usr/ports. I noticed -c was removed in 5.0... what replaced it? How do
folks keep thier /usr/ports up to date now.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
On Mon, 17 Feb 2003, Aaron Wohl wrote:
In 4.7 I found pkg_version -c usefull to get a list of commands to update
/usr/ports. I noticed -c was removed in 5.0... what replaced it? How do
folks keep thier /usr/ports up to date now.
/usr/ports/sysutils/portupgrade works very nicely. Just
Thus spake Jacques A. Vidrine [EMAIL PROTECTED]:
On Mon, Feb 17, 2003 at 04:40:48PM +1100, Tim Robbins wrote:
I disagree. It's safe to use rand() in games and in certain kinds of
simulations when you don't care that the distribution isn't quite
uniform,
Safe, maybe. But I think it still
Thus spake David Leimbach [EMAIL PROTECTED]:
I have been looking into helping with the C99 conformance stuff and I wondered if
the
following would be helpful?
http://posixtest.sourceforge.net/
I am sure some of you knew about this... I guess I wonder if a link on the C99 web
page
is
On Tue Feb 18, 2003 at 12:19:35AM +, Bruce Cran wrote:
ACPI power management on Asus motherboards with the VIA chipset seems to
be quite broken. On my A7V333 I can use mode 1 (CPU off), 2 and 3
report AE_NOT_FOUND and 4 dumps the cpu registers, while power-off on
shutdown reports an ACPI
Did anyone experience SMP kernel crashed at reboot?
On my Tyan Tiger 230T motherboard, when I type reboot,
it crashed very often, typically after it printed
Waiting (max 60 seconds) for system process `vnlru' to stop
David Xu
To Unsubscribe: send mail to [EMAIL PROTECTED]
with
On 2003-02-18 00:02, Wiktor Niesiobedzki [EMAIL PROTECTED] wrote:
On Mon, Feb 17, 2003 at 11:47:32PM +0100, Wiktor Niesiobedzki wrote:
There is an obvious mistake in patch (or change in ip_fw2.c should
be considered).
[...]
--- sys/kern/uipc_socket.c 2003/02/17 22:37:58 1.144
+++
[EMAIL PROTECTED] wrote:
In message [EMAIL PROTECTED], Joerg Wunsch writes:
Darren Pilgrim [EMAIL PROTECTED] wrote:
The above practices have worked fine for a long time in 4.x and still do
even in 4.7p4, which is on this same machine.
Get Matthew N. Dodd's patch at:
hi:
I figured since raidframe was in FreeBSD, it would be a good chance to
try it. I've already used vinum and ccd. I run it in Vmware. I
remember seeing that raidframe is still work in progress. Maybe
something is wrong with my setup. Or maybe it's broken ATM and I
should give it a shot later.
On Mon, Feb 17, 2003 at 04:03:13PM -0500, Alexander Kabaev wrote:
Just committed /usr/src/libexec/rtld-elf/rtld.c v1.76 should fix that.
--
Alexander Kabaev
Thank you Alexander, this solved the uic problem.
Regards,
Jiawei Ye
--
Without the userland, the kernel is useless.
On Mon, 17 Feb 2003, Terry Lambert wrote:
First, I just have a slight editorial comment, about cheating on
Polygraph.
Terry,
This is not the place to start a long discussion about our
Polygraph testing methodology, but I have to say, with all due
respect, that many of your statements
Hi
I turned softupdates back on recently. This panic is very repeatable:
turn off the computer without shutting down. It panics shortly
after the background fsck starts. The kernel and world are recent
and in sync:
[brane-dead] ~ # uname -a
FreeBSD brane-dead.digs.iafrica.com 5.0-CURRENT
In message: [EMAIL PROTECTED]
Dag-Erling Smorgrav [EMAIL PROTECTED] writes:
: Takahashi Yoshihiro [EMAIL PROTECTED] writes:
: I have had some questions like Does PC98 have ISA bus? or Why PC98
: uses ISA driver?. To clear these questions and problems, I think
: that adding
In message [EMAIL PROTECTED], M. Warner Losh writes:
In message: [EMAIL PROTECTED]
Dag-Erling Smorgrav [EMAIL PROTECTED] writes:
: Takahashi Yoshihiro [EMAIL PROTECTED] writes:
: I have had some questions like Does PC98 have ISA bus? or Why PC98
: uses ISA driver?. To clear these
In message: [EMAIL PROTECTED]
[EMAIL PROTECTED] writes:
: In message [EMAIL PROTECTED], M. Warner Losh writes:
: In message: [EMAIL PROTECTED]
: Dag-Erling Smorgrav [EMAIL PROTECTED] writes:
: : Takahashi Yoshihiro [EMAIL PROTECTED] writes:
: : I have had some questions
M. Warner Losh [EMAIL PROTECTED] writes:
In message: [EMAIL PROTECTED]
Dag-Erling Smorgrav [EMAIL PROTECTED] writes:
: So you're duplicating a large amount of existing, working code just so
: you can avoid answering questions from confused users? Or are there
: any actual
In message: [EMAIL PROTECTED]
Dag-Erling Smorgrav [EMAIL PROTECTED] writes:
: M. Warner Losh [EMAIL PROTECTED] writes:
: In message: [EMAIL PROTECTED]
: Dag-Erling Smorgrav [EMAIL PROTECTED] writes:
: : So you're duplicating a large amount of existing, working code just
In message [EMAIL PROTECTED], M. Warner Losh writes:
In message: [EMAIL PROTECTED]
[EMAIL PROTECTED] writes:
: In message [EMAIL PROTECTED], M. Warner Losh writes:
: In message: [EMAIL PROTECTED]
: Dag-Erling Smorgrav [EMAIL PROTECTED] writes:
: : Takahashi Yoshihiro [EMAIL
Andrew Gallatin [EMAIL PROTECTED] writes:
You might be able to get some idea of what's happening by enabling KTR
and tracing everything, then dumping the trace buffer at your
breakpoint.
Hmm, how do I dump the KTR buffer from DDB? I've done it before, but
it's ages ago and I don't remember
Andrew Gallatin [EMAIL PROTECTED] writes:
You might be able to get some idea of what's happening by enabling KTR
and tracing everything, then dumping the trace buffer at your
breakpoint.
Of course, the KTR-enabled kernel fails to crash.
*sigh*
but I bet it'll segfault like nobody's business
Dag-Erling Smorgrav writes:
Andrew Gallatin [EMAIL PROTECTED] writes:
You might be able to get some idea of what's happening by enabling KTR
and tracing everything, then dumping the trace buffer at your
breakpoint.
Of course, the KTR-enabled kernel fails to crash.
*sigh*
Thus spake Dag-Erling Smorgrav [EMAIL PROTECTED]:
/usr/obj/usr/src/i386/usr/lib/libstdc++.so: undefined reference to `fabsl'
*** Error code 1
Our libm doesn't seem to support long double at all, yet our libstdc++
requires long double support. It seems to correctly detect the
absence of a
Hi everyone,
Just cvsuped from RELENG_5_0 to CURRENT and now the system panics when I
try to log in to gnome. It's a different process every time, but it
seems to be things that use file locks (my home dir is NFS mounted).
NFS access by programs that don't acquire locks seems to work okay.
In message [EMAIL PROTECTED], Darren Pilgrim writes:
I can understand the usefulness of preventing modifications applying to
mounted partitions, and I can see the logic in unliaterally preventing
them, but preventing modifying slice table and disk label entries for
unmounted portions of the
Hi!
I saw many stuff about acpi in dmesg since I changed to 5.0
So I assume it's newer than APM.
# man zzz
--
APM(8) FreeBSD System Manager's Manual APM(8)
NAME
apm, zzz - control the APM BIOS and display its information
[..]
--
How do I make my laptop
On Tue, Feb 18, 2003 at 08:55:03AM +0100, Pierrick Brossin wrote:
Hi!
I saw many stuff about acpi in dmesg since I changed to 5.0
So I assume it's newer than APM.
# man zzz
--
APM(8) FreeBSD System Manager's Manual APM(8)
NAME
apm, zzz -
90 matches
Mail list logo
