Amd is poorly designed the way it blocks and is overly sensative to one's
network setup. Your's is the first trouble I've heard of with back
grounding its invocation, and several were happy with it. I don't know
what to say. remove rev 1.127 if you like.
what's needed is a simple way
Hi. What are the plans for USB mass storage support? I was expecting
and really hoping it would be better supported in the 5.1 release but
I tested 5.1-RC1 and the same problems still exists that I have under
5.0. Umass BBB mode seems to still be incomplete. I posted about
this once before not
This set of commits seems to have fixed a perennial problem I've had with
my laptop and acpi. Previously, about every 3rd or 4th reboot the pci bus
would fail to initialize, the major symptom of which was that the xl card
wouldn't set up, and I'd have to reboot again. Disabling acpi eliminated
the
Hello,
I'm running current and I had left forgot to turn the ftp knob in
inetd.conf off. I came back after a drive to find my /var/ filesystem
full. I did not (per sysinstall)have anon ftp on, but someone made
lots of bogus directories in /var/ftp/pub anyway.
I decided to install
Hi,
I am getting this ?panic? when my 3Com (3CRSHPW196) WiFi card is already
inserted into the slot on boot up (also happens with a insert while running)
on a fresh build of current from today. This is on a Dell Inspiron 2600,
and also occured when i orginally installed beta2 and when I use the
On Sun, 8 Jun 2003, Vincent wrote:
Vincent,
My PhotoClip DM2132 camera which works under Linux, produces the
following messages in the system log but produces and IO error when I
try to mount it.
I'm also working on a USB device (PQI 128 MB Flash Drive) that's not
working (yet).
Can you put
TB --- 2003-06-08 09:39:45 - starting CURRENT tinderbox run for sparc64/sparc64
TB --- 2003-06-08 09:39:45 - checking out the source tree
TB --- cd /home/des/tinderbox/CURRENT/sparc64/sparc64
TB --- /usr/bin/cvs -f -R -q -d/home/ncvs update -Pd -A src
TB --- 2003-06-08 09:42:36 - building world
TB
On Sun, Jun 08, 2003 at 12:44:35AM -0700, Perry S. Glenn wrote:
Is chkrootkit giving accurate info for FreeBSD-5 ?
This is a FAQ. Please go and bother the authors of chkrootkit and
have them update the signatures so this question stops getting asked.
Kris
pgp0.pgp
Description: PGP
Hi there,
i installed RC5.1 on my laptop 1 week ago. It works fine so far but the
mini-PCI wlan card doesnt work.
Its a Cisco Aironet 350. The driver does find the card but when I activate
its interface an0 I get a timeout message, the cpu-load jumps to 100% and I
need to reset the laptop. After
On Thu, Jun 05, 2003 at 02:07:03PM +0200, Poul-Henning Kamp wrote:
In message [EMAIL PROTECTED], Bernd Walter writes:
If I find something and you have the time to test would be great, as
it happened to me with a thermo transfer printer, where tests are
expensive.
Well, my dad probably picks
Since a short time (don't know exactly when it happened) it's not possible
anymore to play Quicktime files (.mov) with mplayer on 5.1-CURRENT. It has to
be a change in -CURRENT, I haven't updated mplayer.
I do not have the right fix, but the cause of the problem is
that in loader/win32.c at
From: Perry S. Glenn [EMAIL PROTECTED]
Date: 2003/06/08 Sun AM 03:44:35 EDT
To: [EMAIL PROTECTED]
Subject: chkrootkit w/ current
Hello,
I'm running current and I had left forgot to turn the ftp knob in
inetd.conf off. I came back
On Sat, Jun 07, 2003 at 03:34:08PM -0700, Tim Kientzle wrote:
David O'Brien wrote:
This won't work on non-i386, due to alloca issues.
+ WORLDTMP=${WORLDTMP} CSTD= \
may.
Hmmm... This seems like the Right Thing in
any case, since it is one less assumption you're
making
On Sat, 7 Jun 2003, David Yeske wrote:
Jun 8 00:52:33 photon sendmail[293]: h584pRfm000293: SYSERR(root): cannot
flock(./tfh584pRfm000293, fd=5, type=6, omode=40001, euid=25^C.
NFS access cache time=2
Starting statd.
Starting lockd.
It looks like sendmail starts before rpc.lockd and
In message: [EMAIL PROTECTED]
[EMAIL PROTECTED] (Torsten Kötting) writes:
: Its a Cisco Aironet 350. The driver does find the card but when I activate
: its interface an0 I get a timeout message, the cpu-load jumps to 100% and I
: need to reset the laptop.
These are classic interrupt
[ Thomas and Emil talk about Dell OEM SB, Emil gives a pciconf ]
Could somebody with Dell OEM card try this patch and report
back?
--Mat
--
Brain: Pinky, are you pondering what I'm pondering?
Pinky: I think so Brain, but if you replace the P with an O, my name
would be Oinky,
Hello,
: After checking several mailarchives and trying
: older firmwares for the MPI350 without having any success I thought I
give
: up on the MPI350 and buy an Orinoco wlan card, again MiniPCI. I was sure
I
: have solved my probs now but I was wrong. Exactly the same problem
appears
: now with
In message: [EMAIL PROTECTED]
[EMAIL PROTECTED] (Torsten Kötting) writes:
: Interesting was that the Orinoco card was'nt found when i was using my
: custom-mini kernel which had all the PC-Card stuff disabled. I thought the
: accessability of the mini-PCI slot doesnt depend on any
Indeed, a very dirty but effective fix. Thank you. I'll forward this to ports@
and lioux@, who has done all the recent updates on mplayer.
Arjan
On Sunday 08 June 2003 15:06, Ted Lindgreen wrote:
Since a short time (don't know exactly when it happened) it's not
possible anymore to play
On Sun, 8 Jun 2003, Arjan van Leeuwen wrote:
Indeed, a very dirty but effective fix. Thank you. I'll forward this to
ports@ and lioux@, who has done all the recent updates on mplayer.
So one interesting question would be: if you ktrace on both 4.x and 5.x,
do both pass in the bad value to
TB --- 2003-06-08 21:32:31 - starting CURRENT tinderbox run for sparc64/sparc64
TB --- 2003-06-08 21:32:31 - checking out the source tree
TB --- cd /home/des/tinderbox/CURRENT/sparc64/sparc64
TB --- /usr/bin/cvs -f -R -q -d/home/ncvs update -Pd -A src
TB --- 2003-06-08 21:34:54 - building world
TB
It looks like we are calling the ahc_chip_init()
code in the ahc/aic7xxx driver on shutdown. Is that correct?
--
Pawel
boot() called on cpu#0
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to stop...stopped
Waiting
On Mon, Jun 09, 2003 at 01:05:07AM +0300, Ruslan Ermilov wrote:
On Sun, Jun 08, 2003 at 10:35:47PM +0200, Vaclav Petricek wrote:
Hello
I am trying to redirect all http traffic of unauthorized wifi users on a
wireless hotspot to a login page. The problem I have is that I can not
I tried the patch as you suggest. The device is now found, but it does not
function.
pcm0:play:0: play interrupt timeout, channel dead
dmesg lists:
pcm0: Dell EMU10K1 port 0xdc40-0xdc5f irq3 at device 9.0 on pci2
Thank you,
Tom Veldhouse
- Original Message -
From: Mathew Kanner
This is when sendmail is ran from virecover.
Is this because sendmail is taking redirection,
and it needs to flock() for that?
I think a solution could be to make virecover called later on.
Why are rpc.lockd and rpc.statd not started directly after
rpcbind?
Here is some more output.
Recovering
Does anyone object to me adding sparc64 to the #ifdef __alpha__ line
in sys/disklabel.h? Attached is the patch I would commit. It has been
verified to compile under sparc64.
The only big change is that this changes the LABELOFFSET from 128 to
64 on sparc, but it doesn't look like any kernel
On Sun, 8 Jun 2003, David Yeske wrote:
This is when sendmail is ran from virecover.
Is this because sendmail is taking redirection, and it needs to flock()
for that?
Generally, sendmail uses flock() on the aliases file and related databases
to ensure consistency. As far as I know, it's
Generally, sendmail uses flock() on the aliases file and related databases
to ensure consistency. As far as I know, it's unrelated to redirection.
And for locking queue files.
Here is what Control-T does
load: 0.20 cmd: sendmail 292 [pause] 0.02u 0.04s 0% 2016k
pause, eh? That
Hi Orion,
On Thu, Jun 05, 2003 at 01:05:32PM -0700, Orion Hodson wrote:
The problem you are experiencing is almost certainly localized in the ich
code, specifically ich_init - we may also want ich_reinit. The intel specs
are very good as a rule and certainly the place to start - I don't
Hi,
I was trying to dump my crypted partition (mounted) and got the following:
DUMP: Dumping /dev/twed0s1h.bde to /dev/nsa0
DUMP: Cannot find file system superblock
DUMP: The ENTIRE dump is aborted.
how can I back it up ?
thx
Christophe
--
Christophe Zwecker mail: [EMAIL
I have recently purchased a Dell Dimension 8250 which contains a Creative
Labs SoundBlaster Live! DD 5.1 card. My previous SoundBlaster Live! card
was detected in FreeBSD 4.7, but this one is not detected in this machine
using FreeBSD 5.1 RELEASE (cvsup to it). No pcm devices show during boot.
I believe the soundblasters in dell machines are special in some kind, I
have a dell as well and the SB Live that came with it works fine under
windows, but does not work at all under FreeBSD, however I had an old
Live (exact same spec as the one that came with the machine) and it
works just fine,
Emil A Eklund wrote:
I believe the soundblasters in dell machines are special in some kind, I
have a dell as well and the SB Live that came with it works fine under
windows, but does not work at all under FreeBSD, however I had an old
Live (exact same spec as the one that came with the machine)
Here goes
I currently have both the dell soundblaster and a boxed soundblaster in
the machine so you should see both.
If there's anything else you'll need let me know.
/Emil
On Sun, 2003-06-08 at 19:00, Scott Long wrote:
Emil A Eklund wrote:
I believe the soundblasters in dell machines are
34 matches
Mail list logo
