On 13.09.2013 22:10, Glen Barber wrote:
The first ALPHA build of the 10.0-RELEASE release cycle is now available
on the FTP servers for the amd64, i386, ia64, powerpc, and sparc64
architectures.
The image checksums follow at the end of this email.
ISO images and, for architectures that support
On Wed, 2013-09-11 at 17:00 +0200, Dag-Erling Smørgrav wrote:
> OpenSSH in FreeBSD 10 is now built with DNSSEC support, unless you
> disable LDNS in src.conf. If DNSSEC is enabled, the default setting for
> VerifyHostKeyDNS is "yes". This means that OpenSSH will silently trust
> DNSSEC-signed SSH
Ian Lepore writes:
> I just ran into a build error related to this:
> [...]
> I find that the attached patch fixes it for me.
> [...]
> @@ -1468,7 +1468,7 @@ lib/libcxxrt__L: gnu/lib/libgcc__L
> lib/libradius lib/libsbuf lib/libtacplus \
> ${_cddl_lib_libumem} ${_cddl_l
I am trying to rebuild xfce4-session on 10.0 as of r255478. It fails
with /usr/local/lib/libiconv.a missing from libtool. Does anybody have
a clue as to what to do at this point?
--
Best regards,
Derek Tattersall
d...@mebtel.net dlt...@yahoo.com dtatt...@gmail.com
__
Derek Tattersall writes:
> I am trying to rebuild xfce4-session on 10.0 as of r255478. It fails
> with /usr/local/lib/libiconv.a missing from libtool. Does anybody have
> a clue as to what to do at this point?
That library comes from libiconv, not libtool.
Sounds like your installation of conv
On Sat, 2013-09-14 at 16:03 +0200, Dag-Erling Smørgrav wrote:
> Ian Lepore writes:
> > I just ran into a build error related to this:
> > [...]
> > I find that the attached patch fixes it for me.
> > [...]
> > @@ -1468,7 +1468,7 @@ lib/libcxxrt__L: gnu/lib/libgcc__L
> > lib/libradius l
Le 04/09/2013 17:01, Alexander a écrit :
> ...
> #8 0x80319390 in drm_attach (kdev=,
> idlist=) at /usr/src/sys/dev/drm/drm_drv.c:462
> ...
In this stack trace, it appears that the "drm" code is used, not "drm2".
Do you have "device drm" in your kernel config? If yes, please remove
it,
This is an older Dell E1505, Core 2 but does not have AHCI.
r255569 does not find /dev/ada0s2a and "?" at the mountroot> prompt
shows no devices.
r255451 from September 10 boots fine.
Also possibly relevant is that after successfully building and
installing world and kernel, /boot/kernel.old
For a while I've been getting a build error on aicasm during the early
steps of the build. Today I finally dug into it and discovered it's
because the build is using a mix of header files, some from /usr/include
on the build host, and some from obj/... for the target being built. It
happens becau
Hi,
FreeBSD-10.0-ALPHA1-i386-disc1.iso
Verified checksum.
I can not boot from CD-RW at all - it does not seem to be recognized.
Anybody else has similar experience ?
jb
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listin
On Sat, Sep 14, 2013 at 1:37 PM, Warren Block wrote:
> This is an older Dell E1505, Core 2 but does not have AHCI.
>
> r255569 does not find /dev/ada0s2a and "?" at the mountroot> prompt shows
> no devices.
>
> r255451 from September 10 boots fine.
>
> Also possibly relevant is that after success
On Sep 14, 2013, at 19:50, Ian Lepore wrote:
> For a while I've been getting a build error on aicasm during the early
> steps of the build. Today I finally dug into it and discovered it's
> because the build is using a mix of header files, some from /usr/include
> on the build host, and some from
On Sat, 14 Sep 2013 10:32:38 -0400
Derek Tattersall wrote:
> I am trying to rebuild xfce4-session on 10.0 as of r255478. It fails
> with /usr/local/lib/libiconv.a missing from libtool. Does anybody
> have a clue as to what to do at this point?
>
rebuild all dependencies (gtk20,glib20, libxfce
On Sat, 2013-09-14 at 20:42 +0200, Dimitry Andric wrote:
> On Sep 14, 2013, at 19:50, Ian Lepore wrote:
> > For a while I've been getting a build error on aicasm during the early
> > steps of the build. Today I finally dug into it and discovered it's
> > because the build is using a mix of header
Hi all,
Last night, I has tried to put in my kernel config the libiconv with this
knobs from LINT:
options CD9660_ICONV
options MSDOSFS_ICONV
options UDF_ICONV
options LIBICONV
but this results int this error:
cc -c -O2 -pipe -fno-strict-aliasing -std=c99
> r255569 does not find /dev/ada0s2a and "?" at the mountroot> prompt
> shows no devices.
I've had the same problem after I updated my kernel today. I tracked it
down to the hyperv drivers that were added in r255524. Without the "device
hyperv" line in my kernconf the system boots fine again.
> FreeBSD-10.0-ALPHA1-i386-disc1.iso
> Verified checksum.
> I can not boot from CD-RW at all - it does not seem to be recognized.
> Anybody else has similar experience ?
> jb
Is your CD-RW not recognized even before it tries to boot?
Is your disc1.iso burned to CD or DVD? Is the drive CD or DVD?
Thomas Mueller bellsouth.net> writes:
>
> > FreeBSD-10.0-ALPHA1-i386-disc1.iso
> > Verified checksum.
> > I can not boot from CD-RW at all - it does not seem to be recognized.
> > Anybody else has similar experience ?
> > jb
>
> Is your CD-RW not recognized even before it tries to boot?
>
> Is
On Sat, Sep 14, 2013 at 09:26:24PM +, jb wrote:
> Thomas Mueller bellsouth.net> writes:
> > > FreeBSD-10.0-ALPHA1-i386-disc1.iso
> > > Verified checksum.
> > > I can not boot from CD-RW at all - it does not seem to be recognized.
> > > Anybody else has similar experience ?
> > > jb
> >
> > Is
FreeBSD 10 Alpha Release is Booting on the Shuttle DS47 - But still no support
for the Realtek RT 8111G Network Cards.
g.
Thomas
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send
Motherboard: Intel DQ77KB, the latest BIOS.
k1% biosver
Version: KBQ7710H.86A.0052.2013.0708.1336
Release Date: 07/08/2013
smbios.bios.reldate="07/08/2013"
smbios.bios.vendor="Intel Corp."
smbios.bios.version="KBQ7710H.86A.0052.2013.0708.1336"
lspci -vv
00:19.0 Ethernet controller: Intel Corporat
On Sat, 2013-09-14 at 20:42 +0200, Dimitry Andric wrote:
> On Sep 14, 2013, at 19:50, Ian Lepore wrote:
> > For a while I've been getting a build error on aicasm during the early
> > steps of the build. Today I finally dug into it and discovered it's
> > because the build is using a mix of header
Glen Barber FreeBSD.org> writes:
> ...
> Can you try the 20130907 -CURRENT snapshot here?
>
> http://ftp.freebsd.org/pub/FreeBSD/snapshots/ISO-IMAGES/i386/10.0/
>
> Glen
OK. That worked out.
jb
___
freebsd-current@freebsd.org mailing list
http:/
On Sat, Sep 14, 2013 at 11:09:22PM +, jb wrote:
> Glen Barber FreeBSD.org> writes:
>
> > ...
> > Can you try the 20130907 -CURRENT snapshot here?
> >
> > http://ftp.freebsd.org/pub/FreeBSD/snapshots/ISO-IMAGES/i386/10.0/
> >
> > Glen
>
> OK. That worked out.
Hmm. That's... unexpected. :
On Sat, Sep 14, 2013 at 2:37 PM, Jan Kokemüller
wrote:
> > r255569 does not find /dev/ada0s2a and "?" at the mountroot> prompt
> > shows no devices.
>
> I've had the same problem after I updated my kernel today. I tracked it
> down to the hyperv drivers that were added in r255524. Without the "dev
On Sat, Sep 14, 2013 at 07:16:10PM -0400, Outback Dingo wrote:
> On Sat, Sep 14, 2013 at 2:37 PM, Jan Kokemüller
> wrote:
>
> > > r255569 does not find /dev/ada0s2a and "?" at the mountroot> prompt
> > > shows no devices.
> >
> > I've had the same problem after I updated my kernel today. I tracked
On Sat, 14 Sep 2013, Jan Kokemüller wrote:
r255569 does not find /dev/ada0s2a and "?" at the mountroot> prompt
shows no devices.
I've had the same problem after I updated my kernel today. I tracked it
down to the hyperv drivers that were added in r255524. Without the "device
hyperv" line in my
I dd into another pendrive, it seems to go through mountroot this time,
Consider problem solved, solution is change another pendrive brand if stuck at
mountroot> with Kingston.
Thanks.
___
freebsd-current@freeb
Index: sys/dev/re/if_re.c
===
--- sys/dev/re/if_re.c (revision 255582)
+++ sys/dev/re/if_re.c (working copy)
@@ -234,6 +234,10 @@
{ RL_HWREV_8168E_VL, RL_8169, "8168E/8111E-VL", RL_JUMBO_MTU_6K},
{ RL_HWREV_8168F, RL_
29 matches
Mail list logo
