situation. And I haven't received anythhing from the cvs-all mailing list regarding
these files. What do I do to get this to finish up?
Thanks,
Jon
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
that do not exist. I
check the ftp site, they aren't there, and i've cvs up'd the modules. On the web cvs
browser, the files show up but are marked as Attic and have been removed. How do i
fix this?
Thanks,
Jon
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe fr
I had the *exact* same error a minute ago.. upgrading from 3.2-RELEASE, I tried
upgrading my texinfo from 3.12 to 4.0 but that didn't do anything.
:On Tue, Feb 29, 2000 at 03:25:38PM -0500, Aaron Hughes wrote:
I cvsup upgraded my /src dir to 'release=cvs tag=.' which I believe to be
oN tUE, mAR 07, 2000 AT 05:05:40PM +0200, Ruslan Ermilov wrote:
On Wed, Mar 08, 2000 at 01:02:29AM +1000, Idea Receiver wrote:
[...]
btw, I have problem to make release, it kept complain about that i didnt
set the USA_RESIDENT, however, I did! both in /etc and /etc/defaults. Can
please
the following: ad0: WRITE timed out. It then
proceeds to crash.
If anybody can help me I'd appreciate that, I know I don't have a whole lot
of information, but I'll provide it if anybody needs specific things.. It's
just a little harder to include it when it doesn't save it to the hard drive.
Thanks,
Jon
manufacturers usually give dire warnings about plugging
in PS/2 devices when the machine is powered up, maybe that's the reason
why.
--Jon
http://www.witchspace.com
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
more towards programmers than end users, but I certainly found it useful.
Cheers,
--Jon
http://www.witchspace.com
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to [EMAIL
upgraded my VAIO and ended up
getting mangled sound again.
--Jon
http://www.witchspace.com
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to [EMAIL PROTECTED]
Opera and Mozilla-mail.
Any Sugestions??
Cheers,
Jon
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
later: Your clock is off by -1710.9709441 seconds. (131.215.225.254)
[37/36]
Anyways, my dmesg is attached.
-Jon
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights
' flag?
What about people who don't use /proc? Maybe I'm misreading; is the plan
to make ps work (at least with most of the bells and whistles) only with
/proc, or is the plan to make it an option to either strip the setgid and
use proc, or to leave it and use kmem?
--
Jon Hamilton
detail.
--
Jon Parise ([EMAIL PROTECTED]) . Rochester Inst. of Technology
http://www.pobox.com/~parise/ : Computer Science House Member
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
,
and I was seeing the same problem as you, so hopefully that will help.
--
Jon Parise ([EMAIL PROTECTED]) :: http://www.csh.rit.edu/~jon/
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
evident).
Jon Noack
dmesg:
Copyright (c) 1992-2002 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Sat Dec 14 20:48:25 CST 2002
[EMAIL PROTECTED]:/usr
(393,000 total), all of which came
up clean. I think you have a hardware problem somewhere :(
--
Jon Hamilton
[EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
In message [EMAIL PROTECTED], Maxim Sobolev wrote:
} Frank Nobis wrote:
}
} On Wed, Apr 05, 2000 at 07:13:29AM -0500, Jon Hamilton wrote:
}
} up clean. I think you have a hardware problem somewhere :(
}
} That is very likely a hardwre problem. I have a nfs server under 3.4-S
} here
ure others will raise a
more substantial argument than I could.
--
Jon Parise ([EMAIL PROTECTED]) . Rochester Inst. of Technology
http://www.csh.rit.edu/~jon/ : Computer Science House Member
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
; it's possible that I'm missing
some element of your argument, but I think using the term ``everyone'' is
overstating the case considerably.
--
Jon Hamilton
[EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
Jeff Roberson [EMAIL PROTECTED] wrote :
On Fri, 17 Oct 2003, Bruce Evans wrote:
How would one test if it was an improvement on the 4BSD scheduler? It
is not even competitive in my simple tests.
What were your simple tests?
--
Jonathan Mini [EMAIL PROTECTED]
http://www.freebsd.org/
Bruce Evans [EMAIL PROTECTED] wrote :
On Sun, 26 Oct 2003, Jon Mini wrote:
Jeff Roberson [EMAIL PROTECTED] wrote :
On Fri, 17 Oct 2003, Bruce Evans wrote:
How would one test if it was an improvement on the 4BSD scheduler? It
is not even competitive in my simple tests.
What
Wasn't there a patch floating around to build a dynamic world with the
placment of libc et'al in /lib ???
I'd actually like to try that patch for building a tiny fbsd image for
my net4501.
Thanks in advance,
-Jon Disnard
Dan Nelson wrote:
In the last episode (Jun 27), Andrey Nepomnyaschih
for vendors to build their
AP's based on common hardware.
-Jon
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to [EMAIL PROTECTED]
word about this to the postmaster of
freebsd.org.
Best,
-Jon
Andrew P. Lentvorski, Jr. wrote:
I tried to file a bug for one of my -CURRENT machines using send-pr and
got the following result back:
- The following addresses had permanent fatal errors -
[EMAIL PROTECTED]
(reason: 450
, these environments would be
extremely powerful.
I suspect this ability would usefull for other things too, possibly for
security lock-downs on shell users env's without chrooting them as an
example.
-Jon
It might be possible to build this new packaging system on top of the
existing ports
doubts about any issues. However,
maybe some sanity checks in gbde would catch the problem?
shrugs
-Jon
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to [EMAIL PROTECTED]
/192_168_0_130/dev
It could be easy to have it simply exist, or be non-null, to imply a
desire for devfs, and further checked for the existence of the
mount-point as I wrote above.
I could have a pr+patch made in 5 minutes if anybody thinks this is not
a bad idea?
-Jon
at _bus_dmamap_load_buffer+0x3ff: movl %ecx,0(%edx,%eax,8)
$ nm -n /boot/kernel/kernel | grep c03568
c03568e0 T bus_dmamap_load
If there's anything you'd like me to type at the db prompt, just ask
and I'll send the output.
Thanks,
Jon
___
[EMAIL
On Wed, 2003-08-06 at 06:42, Scott Long wrote:
I know what the problem is and I'm working on a patch right now.
Scott
Excellent. I'll be happy to test it if needed.
Jon
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo
On Wed, 2003-08-06 at 05:00, Craig Rodrigues wrote:
On Tue, Aug 05, 2003 at 11:08:33PM -0700, Jon Kuster wrote:
If there's anything you'd like me to type at the db prompt, just ask
and I'll send the output.
Send the backtrace, with the 't' command.
Here you go. Once again, this was hand
On Fri, 2003-08-08 at 23:46, Scott Long wrote:
Attached is an untested patch. Please let me know if it solves the
problem
Scott
That did the trick. Thanks!
Jon
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd
GO VINCE GO! YAH
Vincent Poy wrote:
On Tue, 16 Oct 2001, Valentin Chopov wrote:
just replace mv with cp in /usr/src/kerberos5/lib/libasn1/Makefile
I replaced the 2 mv's in /usr/src/kerberos5/lib/libasn1/Makefile
with cp and while the lib compiles, the problem now is:
cc
into /dev both in single user and multiuser. I got around
this by telling it to not install them.
I have attached dmesg output from both ACPI and non ACPI enabled
boots.
Thanks in advance,
Jon Christopherson
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983
Hello,
That patch worked like a charm! Ps2 port seen fine both in acpi
mode and non-acpi mode. Thanks a lot. Perhaps this should be imported to
the driver in the source tree?
Attached is the new dmesg output.
Regards,
Jon Christopherson
-Original Message-
From: KT
/30373 and there is no one handle it at all. I
have tried FreeBSD 4.4-RELEASE, 4.5-PRERELEASE and
5.0-CURRENT (which is cvsup a month ago) and the
problem is still persisted.
http://www.freebsd.org/cgi/query-pr.cgi?pr=misc/30373
--
Jon Parise ([EMAIL PROTECTED]) . Information Technology
you're at it, why not use single word verbs:
size (got 1234 wanted 5678)
cksum (got 42424242 wanted 69696969)
Or perhaps:
size (got 1234 expected 5678)
cksum (got 42424242 expected 69696969)
--
Jon Parise ([EMAIL PROTECTED]) . Rochester Inst
On Sat, Oct 07, 2000 at 09:44:39PM +0200, Wilko Bulte wrote:
Time to put the cvsup servers on the map with ICBM coordinates maybe?
I think that would actually be quite useful (or, at the very least,
purely informative).
--
Jon Parise ([EMAIL PROTECTED]) . Rochester Inst. of Technology
http
endif
--
Jon Parise ([EMAIL PROTECTED]) . Rochester Inst. of Technology
http://www.csh.rit.edu/~jon/ : Computer Science House Member
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
From: Peter Jeremy [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: proc-args (M_PARGS) leakage
Date: Mon, 17 Jun 2002 13:15:03 +1000
Message-id: [EMAIL PROTECTED]
User-Agent: Mutt/1.2.5.1i
Sender: [EMAIL PROTECTED]
This is -CURRENT from 7th May so it's possible the bug has been
fixed,
k ppp[3106]: tun1: Debug: Waiting for carrier
Dec 11 20:48:21 woodstock ppp[3106]: tun1: Debug: deflink: Using tty_Timeout
[0x8072d44]
Dec 11 20:48:21 woodstock ppp[3106]: tun1: Debug: Waiting for carrier
[ and on and on and on ]
--
Jon Hamilton
[EMAIL PROTECTED]
To Unsubscribe:
a zoologically correct operating system ...
--
Jon Parise ([EMAIL PROTECTED]) . Rochester Inst. of Technology
http://www.pobox.com/~parise/ : Computer Science House Member
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
ns are more than welcome. If I can get it running in this
3.3-STABLE server, then I'll steal the controller for a weekend and bang out
some -CURRENT code, although I think the necessary changes (STABLE - CURRENT)
should be fairly minor.
---
Jon Simola [EMAIL PROTECTED] | "In the near futu
a few web sites
and ftp sites' download areas to see why. It's just not ubiquitous, or
even close.
--
Jon Hamilton
[EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
in order for some of that kind
of information to leak out. Besides, by answering very slowly for
invalid usernames you just gave the bad guys a way to deduce your
user list anyway.
--
Jon Hamilton
[EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsub
-stable system), is this:
Historically, the -d, -h and -x options were implemented using the pri-
maries ``-depth'', ``-follow'', and ``-xdev''. These primaries always
``-h'' there should read ``-H''; -h is an unknown option to find(1).
--
Jon Hamilton
hamil...@pobox.com
supposed
to be touched by the install/upgrade tools, it'll get out of date (and
will become a hinderance rather than a help) as default settings change,
and as settings are added/deleted.
--
Jon Hamilton
hamil...@pobox.com
To Unsubscribe: send mail to majord...@freebsd.org
with unsubscribe
not affect the behavior, only the kernel tunable parameter.
--
Jon Hamilton
hamil...@pobox.com
To Unsubscribe: send mail to majord...@freebsd.org
with unsubscribe freebsd-current in the body of the message
that).
--
Jon Hamilton
hamil...@pobox.com
To Unsubscribe: send mail to majord...@freebsd.org
with unsubscribe freebsd-current in the body of the message
, as well could you give me
five minutes of you busy time to explain please??
My regards
MR jon ruse
I do donate to the fsf donation station if that is anything meaning??
Sent from my iPhone
On 12 Sep 2014, at 23:46, freebsd-current-requ...@freebsd.org
freebsd-current-requ...@freebsd.org wrote
On Sep 20, 2017, at 10:35 PM, Ian Lepore <i...@freebsd.org> wrote:
>
> On Wed, 2017-09-20 at 21:23 -0600, Warner Losh wrote:
>> On Wed, Sep 20, 2017 at 9:16 PM, Warner Losh <i...@bsdimp.com> wrote:
>>
>>> On Wed, Sep 20, 2017 at 8:50 PM, Jon Brawn <j..
functionality?
Jon.
___
freebsd-current@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
urther information about this issue. I would encourage you to read all the
pages and the white paper thoroughly to best understand this issue as it
relates to working with Arm processors.
Jon.
smime.p7s
Description: S/MIME cryptographic signature
> On Jan 7, 2018, at 5:44 PM, Jon Brawn <j...@brawn.org> wrote:
>
>
>> On Jan 6, 2018, at 10:18 PM, blubee blubeeme <gurenc...@gmail.com> wrote:
>>
>> On Sun, Jan 7, 2018 at 12:11 PM, Warner Losh <i...@bsdimp.com> wrote:
>>
>>&g
0x80ef5b7b at Xfast_syscall+0xfb
>
>
> Is the slow transfers user error?
Wotcha!
I don’t see any read or write performance figures anywhere? Also, is this
CURRENT? If so, aren’t all the debug / warning features that are turned on by
default in CURRENT at the moment going to have an effect on throughput?
Especially if you’re writing through a filesystem where directory and file
accesses will each require a lock to be taken, if only for a short while? If
you want to get closer to the true USB speed of the device, stop mounting it
and copying files to the filesystem, but instead just dd data onto and off of
the device directly, and measure how fast that goes. Remember to backup your
data from the card first…
Jon.
smime.p7s
Description: S/MIME cryptographic signature
s the most efficient or best way for userspace to get
> at it.
>
> Oh, and some of these things are useful in portable code, so having to write
> some assembly for every target to get information that the kernel already
> knows is wasteful.
>
> David
This idea of
, what does INTRNG stand for, and what are
its implications when selected vs not selected?
Cheers!
Jon.
smime.p7s
Description: S/MIME cryptographic signature
#16 0x0041fc84 at kern_openat+0x208
#17 0x0064b59c at do_el0_sync+0x8bc
Is there something I should be doing to help debug these?
Jon.
smime.p7s
Description: S/MIME cryptographic signature
56 matches
Mail list logo
