Inetd is disabled with ..
inetd_enable="NO"
I cannot start ftpd from the cmd line using;
/usr/libexec/ftpd -D -S -l -a xxx.xxx.xx.xx -OR- /usr/libexec/ftpd -D -a
xxx.xxx.xx.xx
Error= Aug 16 01:19:52 The-Raven ftpd[988]:
getpeername (/usr/libexec/ftpd): Socket
operationAug 16
01:23:28
going to attempt to build
nge into the kernel and see what happens when it tries loading it up that
way.
Regards,
Nick H.
Network Operations Center
[EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd
doing
that.
Regards,
Nick H.
Network Operations Center
[EMAIL PROTECTED]
- Original Message -
From: Nick H. - Network Operations [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Monday, August 25, 2003 11:59 AM
Subject: nge (Dlink 500-T [Gigabit Driver]) Failure on 5.1
: nge0: National
Recently I have been trying to get inetd to start on a server of mine and it
prints the following error in dmesg:
Sep 2 23:09:18 iso inetd[703]: unknown rpc/udp or rpc/tcp
There is nothing but ftp turned on in the inetd.conf (turn ftp off, same
error). I have tried google, yet it's not
And it did. Thanks!
Regards,
Nick H.
[EMAIL PROTECTED]
- Original Message -
From: Vitali Djatsuk [EMAIL PROTECTED]
To: Martin Blapp [EMAIL PROTECTED]; Nick H. - Network Operations
[EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Sent: Wednesday, September 03, 2003 12:40 AM
Subject: RE: inetd
Got this error today when I dropped out of X/KDE. First time I've seen it
pop up when dropping out of X/KDE. Machne got real sluggish when I did exit
out and took a couple of minutes for console to re-appear and the first
thing that jumped across when console did come back up was the following:
/sys/net/bpf.c:375
2nd 0xc1f427bc dc0 (network driver) @ /usr/src/sys/pci/if_dc.c:3543
dc0: promiscuous mode disabled
Oct 26 20:32:45 router kernel: dc0: promiscuous mode disabled
I'll cvsup again here in a bit and rebuild yet again. I am seeing a version
difference on this box and a box I have
Does support for the Belkin F5D5020 PCMCIA Card/Notebook Network Card exist
in FreeBSD 5.0-RELEASE? According to Belkin, it does, but I have been
unable to find any support for this card. Any suggestions on the right
place to look are more than welcome. Here's the mfg's site:
http
##
/etc/rc.conf:
pccard_enable=YES
pccard_mem=DEFAULT
pccardd_flags= -i 10
the -i 10 sets the IRQ on the device to 10 (dont ask how I found it... Ive
already closed Opera ;D)
and it's using the following in the /etc/defaults/pccard.conf:
# Belkin F5D5020
card Belkin F5D5020-PCMCIA-Network-Card
I attempted to use a D-Link DGE-500T card this weekend on 5.1-RELEASE
(and -CURRENT) with no success. It is unable to probe the device and find a
proper driver for it. My question is: are there any plans currently to
provide support for this card? If there is already support for it (which
may
that did that to me, swap the drive, fixed.
Regards,
Nick H.
Network Operations Center
[EMAIL PROTECTED]
Please rate my performance! http://www.supportteam.net/rate.php3
Please submit all new support requests to
http://ticketmonster.hostingsupport.com
error cmd=write fsbn 41273248 of
41273248-41273374 retrying
Nov 22 09:58:42 juan last message repeated 2 times
Nov 22 09:58:42 juan kernel: ad2: UDMA ICRC error cmd=write fsbn 41273248 of
41273248-41273374 falling back to PIO mode
After replacing the drive, error gone.
Regards,
Nick H.
Network
heh. IBM? It's bad. All of the ones that I had (also running -current
from within 24 hours) that were spitting that were bad (All were POS IBMs
too!). Just my guess, however.
Regards,
Nick H.
Network Operations Center
[EMAIL PROTECTED]
Please rate my performance! http://www.supportteam.net
13 matches
Mail list logo