I thought I'd give this a whirl on a spare disk on a test machine, so I nabbed the ISO from ftp.freebsd.org and burnt to CD. I've tried booting from the CD directly and creating floppies from the kern/mfsroot.flp, both result in identical panics at exactly the same point.
ed1: <Plug & Play Ethernet Card at port 0x2a0-0x2bf irq 2 on isa0 panic: inthand_add: Can't initialize ICU As it happens the same machine has a recent 4.5-STABLE on another disk so the dmesg output from that is below. Any help anyone could give in getting this going would be most appreciated, also I'm not subscribed to the current mailing list since this is my first foray into playing with -current, so if I could be cc'd on any replies. Thanks Andrew 4.5-STABLE dmesg output: Copyright (c) 1992-2002 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 4.5-STABLE #6: Sat Mar 23 01:16:38 GMT 2002 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/DREADNAUGHT Timecounter "i8254" frequency 1193182 Hz CPU: Pentium II/Pentium II Xeon/Celeron (399.32-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x651 Stepping = 1 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV, PAT,PSE36,MMX,FXSR> real memory = 402587648 (393152K bytes) config> q avail memory = 386990080 (377920K bytes) Preloaded elf kernel "kernel" at 0xc03e8000. Preloaded userconfig_script "/boot/kernel.conf" at 0xc03e809c. Pentium Pro MTRR support enabled md0: Malloc disk Using $PIR table, 6 entries at 0xc00fd9b0 npx0: <math processor> on motherboard npx0: INT 16 interface pcib0: <Intel 82443BX (440 BX) host to PCI bridge> on motherboard pci0: <PCI bus> on pcib0 agp0: <Intel 82443BX (440 BX) host to PCI bridge> mem 0xe0000000-0xe3ffffff at device 0.0 on pci0 pcib1: <Intel 82443BX (440 BX) PCI-PCI (AGP) bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <NVidia Riva Ultra TNT2 graphics accelerator> at 0.0 irq 10 isab0: <Intel 82371AB PCI to ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f irq 12 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered ums0: Microsoft Microsoft IntelliMouse \M-. with IntelliEye, rev 1.10/1.00, addr 2, iclass 3/1 ums0: 3 buttons and Z dir. chip0: <Intel 82371AB Power management controller> port 0x5000-0x500f at device 7.3 on pci0 dc0: <82c169 PNIC 10/100BaseTX> port 0xe400-0xe4ff mem 0xe9000000-0xe90000ff irq 5 at device 9.0 on pci0 dc0: Ethernet address: 00:a0:cc:42:32:7c miibus0: <MII bus> on dc0 ukphy0: <Generic IEEE 802.3u media interface> on miibus0 ukphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto pcm0: <Creative EMU10K1> port 0xe800-0xe81f irq 7 at device 10.0 on pci0 orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0 fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 fdc0: FIFO enabled, 8 bytes threshold fd0: <1440-KB 3.5" drive> on fdc0 drive 0 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 16550A sio1: configured irq 3 not in bitmap of probed irqs 0 ppc0: parallel port not found. ed0: <Plug & Play Ethernet Card> at port 0x2a0-0x2bf irq 11 on isa0 ed0: address 00:4f:4c:05:17:31, type NE2000 (16 bit) IP Filter: v3.4.20 initialized. Default = pass all, Logging = enabled ad0: 8063MB <IBM-DHEA-38451> [16383/16/63] at ata0-master UDMA33 ad1: 19574MB <WDC WD205BA> [39770/16/63] at ata0-slave UDMA33 acd0: DVD-ROM <Pioneer DVD-ROM ATAPIModel DVD-103S 0114> at ata1-slave PIO4 Mounting root from ufs:/dev/ad1s1a IP packet filtering initialized, divert disabled, rule-based forwarding disabled, default to deny, logging disabled Andrew Tulloch Lead Web Developer Great4 Ltd 2nd Floor 200 Grays Inn Road London WC1X 8XZ Tel: 0207 316 3126 Mob: 07971 677 035 Email : [EMAIL PROTECTED] http://www.itv-f1.com http://www.bar.net To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message