I've cvsup'ed and built world/kernel from the latest sources to this
point, and on my desktop I have the problem that's been previously
discussed about not being able to boot without a disc in the CD-RW
that's on ata1-master. I've included an annotated verbose dmsesg below.
I have the following in loader.conf.local:
hw.ata.ata_dma="1"
hw.ata.wc="1"
hw.ata.tags="0"
hw.ata.atapi_dma="1"
This is with a fairly standard "GENERIC minus stuff I don't need" kernel
config, with atapicam still commented out. Let me know if there's
anything I can do to help.
Doug
5.1-CURRENT-0830 #1: Sat Aug 30 16:01:06 PDT 2003
[EMAIL PROTECTED]:/usr/local/obj/current/usr/local/src/sys/MASTER-current
Preloaded elf kernel "/boot/kernel/kernel" at 0xc0643000.
Preloaded elf module "/boot/kernel/linux.ko" at 0xc06431d8.
Preloaded elf module "/boot/kernel/nvidia.ko" at 0xc0643284.
Preloaded elf module "/boot/kernel/acpi.ko" at 0xc0643330.
Calibrating clock(s) ... i8254 clock: 1193149 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254" frequency 1193182 Hz quality 0
Calibrating TSC clock ... TSC clock: 601366074 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (601.37-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0x673 Stepping = 3
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory = 536858624 (511 MB)
Physical memory chunk(s):
0x0000000000001000 - 0x000000000009ffff, 651264 bytes (159 pages)
0x000000000066a000 - 0x000000001f6d6fff, 520540160 bytes (127085 pages)
avail memory = 514650112 (490 MB)
bios32: Found BIOS32 Service Directory header at 0xc00f9d50
bios32: Entry = 0xf0520 (c00f0520) Rev = 0 Len = 1
pcibios: PCI BIOS entry at 0xf0000+0x720
pnpbios: Found PnP BIOS data at 0xc00fd1a0
pnpbios: Entry = f0000:d1d0 Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
null: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
VESA: information block
56 45 53 41 00 03 00 01 00 01 01 00 00 00 22 00
00 01 00 04 17 04 07 01 00 01 1a 01 00 01 28 01
00 01 00 01 01 01 02 01 03 01 04 01 05 01 06 01
07 01 08 01 09 01 0a 01 0b 01 0c 01 0e 01 0f 01
VESA: 35 mode(s) found
VESA: v3.0, 65536k memory, flags:0x1, mode table:0xc03b9402 (1000022)
VESA: NVidia
VESA: NVidia Corporation NV17 () Board Chip Rev A2
random: <entropy source>
npx0: <math processor> on motherboard
npx0: INT 16 interface
acpi0: <ASUS P2B > on motherboard
pci_open(1): mode 1 addr port (0x0cf8) is 0x80002358
pci_open(1a): mode1res=0x80000000 (0x80000000)
pci_cfgcheck: device 0 [class=060000] [hdr=00] is there (id=71908086)
pcibios: BIOS version 2.10
Using $PIR table, 6 entries at 0xc00f0d10
PCI-Only Interrupts: none
Location Bus Device Pin Link IRQs
slot 1 0 12 A 0x60 3 4 5 7 9 10 11 12
slot 1 0 12 B 0x61 3 4 5 7 9 10 11 12
slot 1 0 12 C 0x62 3 4 5 7 9 10 11 12
slot 1 0 12 D 0x63 3 4 5 7 9 10 11 12
slot 2 0 11 A 0x61 3 4 5 7 9 10 11 12
slot 2 0 11 B 0x62 3 4 5 7 9 10 11 12
slot 2 0 11 C 0x63 3 4 5 7 9 10 11 12
slot 2 0 11 D 0x60 3 4 5 7 9 10 11 12
slot 3 0 10 A 0x62 3 4 5 7 9 10 11 12
slot 3 0 10 B 0x63 3 4 5 7 9 10 11 12
slot 3 0 10 C 0x60 3 4 5 7 9 10 11 12
slot 3 0 10 D 0x61 3 4 5 7 9 10 11 12
slot 4 0 9 A 0x63 3 4 5 7 9 10 11 12
slot 4 0 9 B 0x60 3 4 5 7 9 10 11 12
slot 4 0 9 C 0x61 3 4 5 7 9 10 11 12
slot 4 0 9 D 0x62 3 4 5 7 9 10 11 12
embedded 0 4 A 0x60 3 4 5 7 9 10 11 12
embedded 0 4 B 0x61 3 4 5 7 9 10 11 12
embedded 0 4 C 0x62 3 4 5 7 9 10 11 12
embedded 0 4 D 0x63 3 4 5 7 9 10 11 12
embedded 0 1 A 0x60 3 4 5 7 9 10 11 12
embedded 0 1 B 0x61 3 4 5 7 9 10 11 12
embedded 0 1 C 0x62 3 4 5 7 9 10 11 12
embedded 0 1 D 0x63 3 4 5 7 9 10 11 12
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 4 func 0
acpi0: power button is handled as a fixed feature programming model.
ACPI timer looks BAD min = 1, max = 6, width = 5
ACPI timer looks BAD min = 2, max = 6, width = 4
ACPI timer looks BAD min = 2, max = 6, width = 4
ACPI timer looks BAD min = 2, max = 6, width = 4
ACPI timer looks BAD min = 2, max = 6, width = 4
ACPI timer looks BAD min = 2, max = 6, width = 4
ACPI timer looks BAD min = 2, max = 6, width = 4
ACPI timer looks BAD min = 2, max = 16777214, width = 16777212
ACPI timer looks BAD min = 1, max = 6, width = 5
ACPI timer looks BAD min = 1, max = 7, width = 6
Timecounter "ACPI-safe" frequency 3579545 Hz quality 1000
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 4 func 3
acpi_bus_number: root bus has no _BBN, assuming 0
AcpiOsDerivePciId: bus 0 dev 4 func 3
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xe408-0xe40b on acpi0
acpi_cpu0: <CPU> on acpi0
acpi_button0: <Power Button> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
---- initial configuration ------------------------
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.12.0
\\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.12.1
\\_SB_.LNKC irq 12: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.12.2
\\_SB_.LNKD irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.12.3
\\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.0
\\_SB_.LNKC irq 12: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.1
\\_SB_.LNKD irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.2
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.3
\\_SB_.LNKC irq 12: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.10.0
\\_SB_.LNKD irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.10.1
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.10.2
\\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.10.3
\\_SB_.LNKD irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.9.0
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.9.1
\\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.9.2
\\_SB_.LNKC irq 12: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.9.3
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.4.0
\\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.4.1
\\_SB_.LNKC irq 12: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.4.2
\\_SB_.LNKD irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.4.3
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.1.0
\\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.1.1
\\_SB_.LNKC irq 12: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.1.2
\\_SB_.LNKD irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.1.3
---- before setting priority for links ------------
---- before fixup boot-disabled links -------------
---- after fixup boot-disabled links --------------
---- arbitrated configuration ---------------------
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.12.0
\\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.12.1
\\_SB_.LNKC irq 12: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.12.2
\\_SB_.LNKD irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.12.3
\\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.0
\\_SB_.LNKC irq 12: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.1
\\_SB_.LNKD irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.2
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.11.3
\\_SB_.LNKC irq 12: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.10.0
\\_SB_.LNKD irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.10.1
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.10.2
\\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.10.3
\\_SB_.LNKD irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.9.0
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.9.1
\\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.9.2
\\_SB_.LNKC irq 12: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.9.3
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.4.0
\\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.4.1
\\_SB_.LNKC irq 12: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.4.2
\\_SB_.LNKD irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.4.3
\\_SB_.LNKA irq 11: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.1.0
\\_SB_.LNKB irq 10: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.1.1
\\_SB_.LNKC irq 12: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.1.2
\\_SB_.LNKD irq 5: [ 3 4 5 6 7 9 10 11 12 14 15] low,level,sharable 0.1.3
pci0: <ACPI PCI bus> on pcib0
pci0: physical bus=0
map[10]: type 3, range 32, base e4000000, size 26, enabled
found-> vendor=0x8086, dev=0x7190, revid=0x03
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0106, statreg=0x2210, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7191, revid=0x03
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0117, statreg=0x0220, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x88 (34000 ns), maxlat=0x00 (0 ns)
found-> vendor=0x8086, dev=0x7110, revid=0x02
bus=0, slot=4, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x000f, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000d800, size 4, enabled
found-> vendor=0x8086, dev=0x7111, revid=0x01
bus=0, slot=4, func=1
class=01-01-80, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[20]: type 4, range 32, base 0000d400, size 5, enabled
pcib0: matched entry for 0.4.INTD (source \\_SB_.LNKD)
pcib0: slot 4 INTD is routed to irq 5
found-> vendor=0x8086, dev=0x7112, revid=0x01
bus=0, slot=4, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
cmdreg=0x0005, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
intpin=d, irq=5
map[90]: type 4, range 32, base 0000e800, size 4, enabled
found-> vendor=0x8086, dev=0x7113, revid=0x02
bus=0, slot=4, func=3
class=06-80-00, hdrtype=0x00, mfdev=0
cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords)
lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 0000d000, size 8, enabled
map[14]: type 1, range 32, base d5800000, size 12, enabled
pcib0: matched entry for 0.9.INTA (source \\_SB_.LNKD)
pcib0: slot 9 INTA is routed to irq 5
found-> vendor=0x9004, dev=0x8178, revid=0x00
bus=0, slot=9, func=0
class=01-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0280, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x08 (2000 ns)
intpin=a, irq=5
found-> vendor=0x3388, dev=0x0021, revid=0x13
bus=0, slot=10, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
cmdreg=0x0007, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x04 (1000 ns), maxlat=0x00 (0 ns)
map[10]: type 4, range 32, base 0000b800, size 5, enabled
pcib0: matched entry for 0.11.INTA (source \\_SB_.LNKB)
pcib0: slot 11 INTA is routed to irq 10
found-> vendor=0x1102, dev=0x0002, revid=0x04
bus=0, slot=11, func=0
class=04-01-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x02 (500 ns), maxlat=0x14 (5000 ns)
intpin=a, irq=10
powerspec 1 supports D0 D3 current D0
map[10]: type 4, range 32, base 0000b400, size 3, enabled
found-> vendor=0x1102, dev=0x7002, revid=0x01
bus=0, slot=11, func=1
class=09-80-00, hdrtype=0x00, mfdev=1
cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords)
lattimer=0x20 (960 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns)
powerspec 1 supports D0 D3 current D0
map[10]: type 1, range 32, base d3000000, size 12, enabled
map[14]: type 4, range 32, base 0000b000, size 6, enabled
map[18]: type 1, range 32, base d2800000, size 20, enabled
pcib0: matched entry for 0.12.INTA (source \\_SB_.LNKA)
pcib0: slot 12 INTA is routed to irq 11
found-> vendor=0x8086, dev=0x1229, revid=0x08
bus=0, slot=12, func=0
class=02-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0017, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x08 (2000 ns), maxlat=0x38 (14000 ns)
intpin=a, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
pcib1: <PCI-PCI bridge> at device 1.0 on pci0
pcib1: secondary bus 1
pcib1: subordinate bus 1
pcib1: I/O decode 0xe000-0xdfff
pcib1: memory decode 0xd6000000-0xd74fffff
pcib1: prefetched decode 0xd7700000-0xe3ffffff
pci1: <PCI bus> on pcib1
pci1: physical bus=1
map[10]: type 1, range 32, base d6000000, size 24, enabled
map[14]: type 3, range 32, base d8000000, size 27, enabled
map[18]: type 3, range 32, base d7800000, size 19, enabled
pcib0: matched entry for 0.1.INTA (source \\_SB_.LNKA)
pcib0: slot 1 INTA is routed to irq 11
pcib1: slot 0 INTA is routed to irq 11
found-> vendor=0x10de, dev=0x0171, revid=0xa3
bus=1, slot=0, func=0
class=03-00-00, hdrtype=0x00, mfdev=0
cmdreg=0x0007, statreg=0x02b0, cachelnsz=0 (dwords)
lattimer=0x40 (1920 ns), mingnt=0x05 (1250 ns), maxlat=0x01 (250 ns)
intpin=a, irq=11
powerspec 2 supports D0 D3 current D0
nvidia0: <GeForce4 MX 440> mem
0xd7800000-0xd787ffff,0xd8000000-0xdfffffff,0xd6000000-0xd6ffffff irq 11 at device 0.0
on pci1
pcib1: device nvidia0 requested decoded memory range 0xd6000000-0xd6ffffff
pcib1: device nvidia0 requested decoded memory range 0xd8000000-0xdfffffff
isab0: <PCI-ISA bridge> at device 4.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel PIIX4 UDMA33 controller> port 0xd800-0xd80f at device 4.1 on pci0
ata0: pre reset mask=03 ostat0=50 ostat2=10
ata0-master: ATAPI 00 00
ata0-slave: ATAPI 14 eb
ata0: after reset mask=03 stat0=50 stat1=10
ata0-master: ATA 01 a5
ata0: devices=09
ata0: at 0x1f0 irq 14 on atapci0
ata1: pre reset mask=03 ostat0=50 ostat2=01
ata1-master: ATAPI 14 eb
ata1-slave: ATAPI 00 00
ata1: after reset mask=03 stat0=00 stat1=01
ata1-slave: ATA 00 a5
ata1: devices=06
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xd400-0xd41f irq 5 at device
4.2 on pci0
usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ugen0: OmniVision OV511+ Camera, rev 1.00/1.00, addr 2
ums0: Logitech Trackball, rev 1.10/2.20, addr 3, iclass 3/1
ums0: 3 buttons and Z dir.
intpm0: <Intel 82371AB Power management controller> port 0xe800-0xe80f irq 9 at device
4.3 on pci0
intpm0: I/O mapped e800
intpm0: intr IRQ 9 enabled revision 0
intsmb0: <Intel PIIX4 SMBUS Interface> on intpm0
smbus0: <System Management Bus> on intsmb0
smb0: <SMBus generic I/O> on smbus0
intpm0: PM I/O mapped e400
ahc0: <Adaptec 2940 Ultra SCSI adapter> port 0xd000-0xd0ff mem 0xd5800000-0xd5800fff
irq 5 at device 9.0 on pci0
ahc0: Defaulting to MEMIO on
ahc0: Reading SEEPROM...done.
ahc0: internal 50 cable not present, internal 68 cable is present
ahc0: external cable is present
ahc0: BIOS eeprom is present
ahc0: Downloading Sequencer Program... 448 instructions downloaded
ahc0: Features 0x5, Bugs 0x25, Flags 0x20481040
aic7880: Ultra Wide Channel A, SCSI Id=7, 16/253 SCBs
pcib2: <PCI-PCI bridge> at device 10.0 on pci0
pcib2: secondary bus 2
pcib2: subordinate bus 2
pcib2: I/O decode 0xc000-0xbfff
pcib2: memory decode 0xd3800000-0xd57fffff
pcib2: prefetched decode 0xd7600000-0xd75fffff
pci2: <PCI bus> on pcib2
pci2: physical bus=2
map[10]: type 1, range 32, base d5000000, size 12, enabled
pcib0: matched entry for 0.10.INTA (source \\_SB_.LNKC)
pcib0: slot 10 INTA is routed to irq 12
pcib2: slot 12 INTA is routed to irq 12
found-> vendor=0x1033, dev=0x0035, revid=0x41
bus=2, slot=12, func=0
class=0c-03-10, hdrtype=0x00, mfdev=1
cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns)
intpin=a, irq=12
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base d4800000, size 12, enabled
pcib0: matched entry for 0.10.INTB (source \\_SB_.LNKD)
pcib0: slot 10 INTB is routed to irq 5
pcib2: slot 12 INTB is routed to irq 5
found-> vendor=0x1033, dev=0x0035, revid=0x41
bus=2, slot=12, func=1
class=0c-03-10, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x01 (250 ns), maxlat=0x2a (10500 ns)
intpin=b, irq=5
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base d4000000, size 8, enabled
pcib0: matched entry for 0.10.INTC (source \\_SB_.LNKA)
pcib0: slot 10 INTC is routed to irq 11
pcib2: slot 12 INTC is routed to irq 11
found-> vendor=0x1033, dev=0x00e0, revid=0x02
bus=2, slot=12, func=2
class=0c-03-20, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x0210, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x10 (4000 ns), maxlat=0x22 (8500 ns)
intpin=c, irq=11
powerspec 2 supports D0 D1 D2 D3 current D0
map[10]: type 1, range 32, base d3800000, size 12, enabled
pcib0: matched entry for 0.10.INTD (source \\_SB_.LNKB)
pcib0: slot 10 INTD is routed to irq 10
pcib2: slot 15 INTA is routed to irq 10
found-> vendor=0x1033, dev=0x00f2, revid=0x01
bus=2, slot=15, func=0
class=0c-00-10, hdrtype=0x00, mfdev=0
cmdreg=0x0016, statreg=0x0290, cachelnsz=8 (dwords)
lattimer=0x20 (960 ns), mingnt=0x14 (5000 ns), maxlat=0x2c (11000 ns)
intpin=a, irq=10
powerspec 2 supports D0 D1 D2 D3 current D0
ohci0: <NEC uPD 9210 USB controller> mem 0xd5000000-0xd5000fff irq 12 at device 12.0
on pci2
pcib2: device ohci0 requested decoded memory range 0xd5000000-0xd5000fff
usb1: OHCI version 1.0
usb1: <NEC uPD 9210 USB controller> on ohci0
usb1: USB revision 1.0
uhub1: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ohci1: <NEC uPD 9210 USB controller> mem 0xd4800000-0xd4800fff irq 5 at device 12.1 on
pci2
pcib2: device ohci1 requested decoded memory range 0xd4800000-0xd4800fff
usb2: OHCI version 1.0
usb2: <NEC uPD 9210 USB controller> on ohci1
usb2: USB revision 1.0
uhub2: NEC OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
pci2: <serial bus, USB> at device 12.2 (no driver attached)
fwohci0: <NEC uPD72874> mem 0xd3800000-0xd3800fff irq 10 at device 15.0 on pci2
fwohci0: latency timer 32 -> 32.
fwohci0: cache size 8 -> 8.
pcib2: device fwohci0 requested decoded memory range 0xd3800000-0xd3800fff
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channel is 4.
fwohci0: EUI64 00:00:4c:00:00:00:16:df
fwohci0: resetting OHCI...done (loop=0)
fwohci0: phy read failed(1).
fwohci0: fwphy_rddata: 0x2 loop=1, retry=1
fwohci0: fwphy_rddata: 0x3 loop=1, retry=0
fwohci0: Phy 1394a available S400, 3 ports.
fwohci0: fwphy_rddata: 0x5 loop=1, retry=0
fwohci0: Enable 1394a Enhancements
fwohci0: fwphy_rddata: 0x5 loop=1, retry=0
fwohci0: fwphy_rddata: 0x2 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: fwphy_rddata: 0x4 loop=1, retry=0
fwohci0: Link S400, max_rec 2048 bytes.
fwohci0: BUS_OPT 0xf800a002 -> 0xf800a002
fwohci0: fwohci_set_intr: 1
firewire0: <IEEE1394(FireWire) bus> on fwohci0
sbp0: <SBP2/SCSI over firewire> on firewire0
sbp_attach (cold=1)
fwohci0: Initiate bus reset
fwohci0: fwphy_rddata: 0x1 loop=1, retry=0
fwohci0: fwphy_rddata: 0x1 loop=1, retry=0
fwohci0: BUS reset
sbp_post_busreset
fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
firewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
fwohci0: fw_set_bus_manager: 0->0 (loop=1)
firewire0: bus manager 0 (me)
send phy_config root_node=-1 gap_count=5
fwohci0: maxdesc: 2
fwohci0: start AT DMA status=0
pci0: <multimedia, audio> at device 11.0 (no driver attached)
pci0: <input device> at device 11.1 (no driver attached)
fxp0: <Intel 82559 Pro/100 Ethernet> port 0xb000-0xb03f mem
0xd2800000-0xd28fffff,0xd3000000-0xd3000fff irq 11 at device 12.0 on pci0
fxp0: using memory space register mapping
fxp0: Ethernet address 00:d0:b7:83:1d:5f
fxp0: PCI IDs: 8086 1229 8086 000c 0008
fxp0: Dynamic Standby mode is disabled
miibus0: <MII bus> on fxp0
inphy0: <i82555 10/100 media interface> on miibus0
inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
fxp0: bpf attached
speaker0 port 0x61 on acpi0
fdc0: <Enhanced floppy controller (i82077, NE72065 or clone)> port 0x3f7,0x3f2-0x3f5
irq 6 drq 2 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
unknown: not probed (disabled)
unknown: not probed (disabled)
sio0: irq maps: 0x441 0x451 0x441 0x441
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0x441 0x449 0x441 0x441
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
unknown: not probed (disabled)
atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0067
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
unknown: not probed (disabled)
ata: ata0 already exists; skipping it
ata: ata1 already exists; skipping it
atkbdc: atkbdc0 already exists; skipping it
fdc: fdc0 already exists; skipping it
sio: sio0 already exists; skipping it
sio: sio1 already exists; skipping it
Trying Read_Port at 203
USR2050: start dependent (0)
USR2050: adding fixed io range 0x2f8-0x2ff, size=0x8, align=0x1
USR2050: adding irq mask 0x8
USR2050: start dependent (1)
USR2050: adding fixed io range 0x3f8-0x3ff, size=0x8, align=0x1
USR2050: adding irq mask 0x10
USR2050: start dependent (1)
USR2050: adding fixed io range 0x3e8-0x3ef, size=0x8, align=0x1
USR2050: adding irq mask 0xb8
USR2050: start dependent (1)
USR2050: adding fixed io range 0x2e8-0x2ef, size=0x8, align=0x1
USR2050: adding irq mask 0xb8
USR2050: end dependent
sc: sc0 already exists; skipping it
vga: vga0 already exists; skipping it
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
orm0: <Option ROMs> at iomem 0xd8000-0xd8fff,0xd0000-0xd6fff on isa0
adv0: not probed (disabled)
aha0: not probed (disabled)
aic0: not probed (disabled)
bt0: not probed (disabled)
cs0: not probed (disabled)
ed0: not probed (disabled)
fe0: not probed (disabled)
ie0: not probed (disabled)
le0: not probed (disabled)
lnc0: not probed (disabled)
pcic0 failed to probe at port 0x3e0 iomem 0xd0000 on isa0
pcic1: not probed (disabled)
ppc0 failed to probe at irq 7 on isa0
fb: new array size 4
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio2: not probed (disabled)
sio3: not probed (disabled)
sn0: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x700ff
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
vga0: vga: WARNING: video mode switching is not fully supported on this adapter
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
VGA parameters in BIOS for mode 24
18 18 18 18 1f 00 00 00 18 18 18 18 ff 00 00 00
00 00 00 00 ff 18 18 18 18 18 18 18 1f 18 18 18
00 00 00 00 ff 00 00 00 18 18 18 18 ff 18 18 18
18 18 1f 18 1f 18 18 18 36 36 36 36 37 36 36 36
EGA/VGA parameters to be used for mode 24
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 54 80
bf 1f 00 4f 0e 0f 00 00 07 80 9c 8e 8f 28 1f 96
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff
vt0: not probed (disabled)
isa_probe_children: probing PnP devices
sio4: irq maps: 0x441 0x4c1 0x441 0x441
sio4: <3Com U.S.Robotics 56K FAX Internal> at port 0x3e8-0x3ef irq 7 on isa0
sio4: type 16550A
Device configuration finished.
procfs registered
Timecounter "TSC" frequency 601366074 Hz quality 800
Timecounters tick every 10.000 msec
lo0: bpf attached
Linux ELF exec handler installed
Current DB 0
ch = 0
Current OP KEY INT BR len Addr Depend Stat: Cnt
007d4000 OUTL ST2 ALL ALL 12 00000000 007d4080 8411:000a RUN,ACTIVE, ack
complete(11)
0x000000e0 0x00450000 0xffbaffff 0x00000000
ata0-slave: pio=0x0c wdma=0x22 udma=0x42 cable=40pin
ata0-master: pio=0x0c wdma=0x22 udma=0x46 cable=80pin
ad0: setting UDMA33 on Intel PIIX4 chip
ad0: <Maxtor 4R060L0/RAMC1TU0> ATA-7 disk at ata0-master
ad0: 58644MB (120103200 sectors), 119150 C, 16 H, 63 S, 512 B
ad0: 16 secs/int, 1 depth queue, UDMA33
GEOM: new disk ad0
[0] f:00 typ:7 s(CHS):0/1/1 e(CHS):1023/12/63 s:63 l:41945652
[1] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/11/63 s:41945715 l:78156225
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure ad0s1, start 32256 length 21476173824 end 21476206079
GEOM: Configure ad0s2, start 21476206080 length 40015987200 end 61492193279
acd0: setting UDMA33 on Intel PIIX4 chip
acd0: <DVD-ROM DDU1621/VER S1.6> DVDROM drive at ata0 as slave
acd0: 512KB buffer, UDMA33
acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, packet
acd0: Writes:
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray, unlocked
acd0: Medium: no/blank disc
ata1-slave: FAILURE - ATA_IDENTIFY status=1<ERROR> error=4<ABORTED>
*** Without a disc in the drive, none of what's below is displayed
ata1-master: pio=0x0c wdma=0x22 udma=0x41 cable=40pin
acd1: setting UDMA25 on Intel PIIX4 chip
acd1: <YAMAHA CRW2100E/1.0N> CDRW drive at ata1 as master
acd1: read 6890KB/s (6890KB/s) write 2755KB/s (2755KB/s), 8192KB buffer, UDMA25
acd1: Reads: CDR, CDRW, CDDA stream, packet
acd1: Writes: CDR, CDRW, test write
acd1: Audio: play, 256 volume levels
acd1: Mechanism: ejectable tray, unlocked
acd1: Medium: CD-ROM unknown
Waiting 5 seconds for SCSI devices to settle
(noperiph:ahc0:0:-1:-1): SCSI bus reset delivered. 0 SCBs aborted.
*** Without a disc, the following lines _do_ display
GEOM: Configure ad0s2b, start 0 length 536870912 end 536870911
GEOM: Configure ad0s2c, start 0 length 40015987200 end 40015987199
GEOM: Configure ad0s2d, start 536870912 length 1585446912 end 2122317823
GEOM: Configure ad0s2e, start 2122317824 length 37893669376 end 40015987199
bus_explore done
sbp_post_explore (sbp_cold=2)
*** Without a disc, the system locks at this point, and I
have to push reset.
(probe21:sbp0:0:6:0): error 22
(probe21:sbp0:0:6:0): Unretryable Error
(probe15:sbp0:0:0:0): error 22
(probe15:sbp0:0:0:0): Unretryable Error
(probe16:sbp0:0:1:0): error 22
(probe16:sbp0:0:1:0): Unretryable Error
(probe17:sbp0:0:2:0): error 22
(probe17:sbp0:0:2:0): Unretryable Error
(probe18:sbp0:0:3:0): error 22
(probe18:sbp0:0:3:0): Unretryable Error
(probe19:sbp0:0:4:0): error 22
(probe19:sbp0:0:4:0): Unretryable Error
(probe20:sbp0:0:5:0): error 22
(probe20:sbp0:0:5:0): Unretryable Error
(probe2:ahc0:0:2:0): Retrying Command
(probe5:ahc0:0:5:0): error 22
(probe5:ahc0:0:5:0): Unretryable Error
(ahc0:A:2:0): Sending WDTR 1
(ahc0:A:2:0): Received WDTR 1 filtered to 1
ahc0: target 2 using 16bit transfers
(ahc0:A:2:0): Sending SDTR period c, offset 8
(ahc0:A:2:0): Received SDTR period c, offset 8
Filtered to period c, offset 8
ahc0: target 2 synchronous at 20.0MHz, offset = 0x8
pass0 at ahc0 bus 0 target 2 lun 0
pass0: <IBM DCAS-34330W S65A> Fixed Direct Access SCSI-2 device
pass0: Serial Number F36J3120
pass0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
pass1 at ahc0 bus 0 target 5 lun 0
pass1: <IOMEGA ZIP 250 H.41> Removable Direct Access SCSI-2 device
pass1: 3.300MB/s transfers
GEOM: new disk da0
GEOM: new disk da1
(da1:ahc0:0:5:0): error 6
(da1:ahc0:0:5:0): Unretryable Error
da1 at ahc0 bus 0 target 5 lun 0
da1: <IOMEGA ZIP 250 H.41> Removable Direct Access SCSI-2 device
da1: 3.300MB/s transfers
da1: Attempt to query device size failed: NOT READY, Medium not present
da0 at ahc0 bus 0 target 2 lun 0
da0: <IBM DCAS-34330W S65A> Fixed Direct Access SCSI-2 device
da0: Serial Number F36J3120
da0: 40.000MB/s transfers (20.000MHz, offset 8, 16bit)
da0: 4134MB (8467200 512 byte sectors: 64H 32S/T 4134C)
[0] f:80 typ:165 s(CHS):0/1/1 e(CHS):1023/63/32 s:32 l:4370400
[1] f:00 typ:165 s(CHS):1023/255/63 e(CHS):1023/63/32 s:4370432 l:4096000
[2] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
[3] f:00 typ:0 s(CHS):0/0/0 e(CHS):0/0/0 s:0 l:0
GEOM: Configure da0s1, start 16384 length 2237644800 end 2237661183
GEOM: Configure da0s2, start 2237661184 length 2097152000 end 4334813183
(da1:ahc0:0:5:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da1:ahc0:0:5:0): CAM Status: SCSI Status Error
(da1:ahc0:0:5:0): SCSI Status: Check Condition
(da1:ahc0:0:5:0): NOT READY asc:3a,0
(da1:ahc0:0:5:0): Medium not present
(da1:ahc0:0:5:0): (da1:ahc0:0:5:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da1:ahc0:0:5:0): NOT READY asc:3a,0
(da1:ahc0:0:5:0): Medium not present
Unretryable error
(da1:ahc0:0:5:0): error 6
(da1:ahc0:0:5:0): Unretryable Error
Opened disk da1 -> 6
(da1:ahc0:0:5:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da1:ahc0:0:5:0): CAM Status: SCSI Status Error
(da1:ahc0:0:5:0): SCSI Status: Check Condition
(da1:ahc0:0:5:0): NOT READY asc:3a,0
(da1:ahc0:0:5:0): Medium not present
(da1:ahc0:0:5:0): (da1:ahc0:0:5:0): READ CAPACITY. CDB: 25 0 0 0 0 0 0 0 0 0
(da1:ahc0:0:5:0): NOT READY asc:3a,0
(da1:ahc0:0:5:0): Medium not present
Unretryable error
(da1:ahc0:0:5:0): error 6
(da1:ahc0:0:5:0): Unretryable Error
Opened disk da1 -> 6
GEOM: Configure da0s1a, start 0 length 134217728 end 134217727
GEOM: Configure da0s1b, start 134217728 length 268435456 end 402653183
GEOM: Configure da0s1c, start 0 length 2237644800 end 2237644799
GEOM: Configure da0s1d, start 402653184 length 67108864 end 469762047
GEOM: Configure da0s1e, start 469762048 length 67108864 end 536870911
GEOM: Configure da0s1f, start 536870912 length 268435456 end 805306367
GEOM: Configure da0s1g, start 805306368 length 1432338432 end 2237644799
GEOM: Configure da0s2c, start 0 length 2097152000 end 2097151999
Mounting root from ufs:/dev/da0s1a
start_init: trying /sbin/init
--
This .signature sanitized for your protection
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
