Re: ACPI kills my current-box frequently.

2001-09-10 Thread Mitsuru IWASAKI

Hi, NAKAJI-san.  Thank you for reporting.

 Just after rebooting with this kernel and installworld, this host reboots
 frequently, about every 10 minutes. /var/log/messages shows that

Could you describe your hardware?  I'd like see boot -v dmesg and ACPI
data.  Please send them to acpi-jp ML.
Also could you try adjust loader variable `debug.acpi.disable' and
see if which component is causing the problem?
Possible values to debug.acpi.disable are;
bus, children, button, cpu, ec, lid, pci, sysresource, thermal and timer.
You can specify them in loader, like;
ok set debug.acpi.disable=cpu ec lid pci sysresource thermal timer
See also acpi(4).

Thanks

To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message



Re: ACPI kills my current-box frequently.

2001-09-10 Thread NAKAJI Hiroyuki

Thank you, Iwasaki-san.

Now I booted the system with 'hint.acpi.0.disable=1' in
/boot/device.hints. It works good at least while writing this message.

 In [EMAIL PROTECTED] 
   Mitsuru IWASAKI [EMAIL PROTECTED] wrote:

HN Just after rebooting with this kernel and installworld, this host
HN reboots frequently, about every 10 minutes. /var/log/messages shows
HN that

MI Could you describe your hardware?  I'd like see boot -v dmesg and ACPI
MI data.  Please send them to acpi-jp ML.

My hardware is...

M/B ASUS P3V4X
CPU PentiumIII 933MHz with ASUS S370-DL
Mem 640MB (total)
HDD WDC AC32500H/24.09P07
Maxtor 31536U2/BAC51NJ0
FUJITSU MPC3102AT E/6207
IBM-DTLA-307045/TX6OA60A
IBM-DTLA-307045/TX6OA60A
IBM DPES-31080 S31Q
IBM DPSS-318350N S96H
IBM DPSS-318350N S96H
QUANTUM FIREBALL SE2.1S PJ09
SCSIAHA-2940U2W
RAIDHighPoint HPT370 ATA100 controller
SOUND   AOpen AW230 (CS461x PCM Audio)
NIC 3Com 3c905B-TX Fast Etherlink XL
VGA Rage 3D IIC (not detected when booting)
PortJusty JIF-01A (serial and parallel ISA)

Dmesgs with and without acpi are attached below. And kernel configuration
is available at
http://www.rc.tutrp.tut.ac.jp/~nakaji/tmp/NAKAJI

MI Also could you try adjust loader variable `debug.acpi.disable' and
MI see if which component is causing the problem?

I'll check them later.
-- 
NAKAJI Hiroyuki

To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message



Re: ACPI kills my current-box frequently.

2001-09-10 Thread NAKAJI Hiroyuki

Oops.

 In [EMAIL PROTECTED] 
   NAKAJI Hiroyuki [EMAIL PROTECTED] wrote:

HN Dmesgs with and without acpi are attached below.

=== with acpi.ko loaded
Copyright (c) 1992-2001 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #12: Sat Sep  8 16:56:16 JST 2001
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/NAKAJI
Calibrating clock(s) ... TSC clock: 936722721 Hz, i8254 clock: 1193160 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter i8254  frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
CPU: Pentium III/Pentium III Xeon/Celeron (936.75-MHz 686-class CPU)
  Origin = GenuineIntel  Id = 0x686  Stepping = 6
  
Features=0x383f9ffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
real memory  = 671072256 (655344K bytes)
Physical memory chunk(s):
0x1000 - 0x0009efff, 647168 bytes (158 pages)
0x004fa000 - 0x27ff3fff, 665821184 bytes (162554 pages)
avail memory = 647581696 (632404K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00f92a0
bios32: Entry = 0xf0690 (c00f0690)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf+0x890
pnpbios: Found PnP BIOS data at 0xc00fc260
pnpbios: Entry = f:c290  Rev = 1.0
pnpbios: OEM ID cd041
Other BIOS signatures found:
Preloaded elf kernel kernel at 0xc04d4000.
Preloaded elf module acpi.ko at 0xc04d40a8.
null: null device, zero device
mem: memory  I/O
Pentium Pro MTRR support enabled
random: entropy source
Math emulator present
pci_open(1):mode 1 addr port (0x0cf8) is 0x8060
pci_open(1a):   mode1res=0x8000 (0x8000)
pci_cfgcheck:   device 0 [class=06] [hdr=00] is there (id=06911106)
Using $PIR table, 8 entries at 0xc00f0e60
apm0: APM BIOS on motherboard
apm0: found APM BIOS v1.2, connected at v1.2
npx0: math processor on motherboard
npx0: INT 16 interface
acpi0: ASUS   P3V_4X   on motherboard
acpi0: power button is handled as a fixed feature programming model.
acpi_button0: Power Button on acpi0
fdc0: NEC 72065B or clone port 0x3f7,0x3f2-0x3f5 irq 6 on acpi0
fdc0: FIFO enabled, 8 bytes threshold
fd0: 1440-KB 3.5 drive on fdc0 drive 0
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0 port 0x378-0x37f irq 7 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: IEEE1284 device found 
/NIBBLE/ECP/ECP_RLE/NIBBLE_ID/ECP_ID/ECP_RLE_ID/Extensibility Link
Probing for PnP devices on ppbus0:
ppbus0: EPSON LP-8400PS3 PRINTER POSTSCRIPT
plip0: PLIP network interface on ppbus0
bpf: lp0 attached
lpt0: Printer on ppbus0
lpt0: Interrupt-driven port
ppi0: Parallel I/O on ppbus0
ppc1: cannot reserve I/O port range
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 port 0x3f8-0x3ff irq 4 on acpi0
sio0: type 16550A
sio1: irq maps: 0x41 0x49 0x41 0x41
sio1 port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
atkbdc0: Keyboard controller (i8042) port 0x64,0x60 irq 1 on acpi0
atkbd0: AT Keyboard flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0047
atkbd: keyboard ID 0x41ab (2)
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d
atkbd1: unable to allocate IRQ
psm0: unable to allocate IRQ
atkbd1: unable to allocate IRQ
psm0: current command byte:0047
psm0: failed to get data.
psm0: PS/2 Mouse irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3-00, 3 buttons
psm0: config:, flags:, packet size:4
psm0: syncmask:00, syncbits:00
psmcpnp0 irq 12 on acpi0
ppc1: cannot reserve I/O port range
pcib0: Host to PCI bridge at pcibus 0 on motherboard
pci0: physical bus=0
map[10]: type 3, range 32, base e400, size 26, enabled
found- vendor=0x1106, dev=0x0691, revid=0xc2
bus=0, slot=0, func=0
class=06-00-00, hdrtype=0x00, mfdev=0
powerspec 2  supports D0 D3  current D0
found- vendor=0x1106, dev=0x8598, revid=0x00
bus=0, slot=1, func=0
class=06-04-00, hdrtype=0x01, mfdev=0
found- vendor=0x1106, dev=0x0596, revid=0x12
bus=0, slot=4, func=0
class=06-01-00, hdrtype=0x00, mfdev=1
map[20]: type 4, range 32, base b800, size  4, enabled
found- vendor=0x1106, dev=0x0571, revid=0x06
bus=0, slot=4, func=1
class=01-01-8a, hdrtype=0x00, mfdev=0
map[20]: type 4, range 32, base b400, size  5, enabled
found- vendor=0x1106, dev=0x3038, revid=0x08
bus=0, slot=4, func=2
class=0c-03-00, hdrtype=0x00, mfdev=0
intpin=d, irq=5
found- vendor=0x1106, dev=0x3050, revid=0x20
bus=0, slot=4, func=3
class=06-00-00, hdrtype=0x00, mfdev=0
map[10]: type 4, range 32, base b000, size  7, enabled
map[14]: type 1, range 32, base e180, size  7, enabled
found- vendor=0x10b7, dev=0x9055, revid=0x30
bus=0, slot=9, func=0
class=02-00-00, hdrtype=0x00, mfdev=0