Re: Panic @r207844; current process: flowcleaner Fatal trap 12: page fault while in kernel mode

2010-05-11 Thread David Wolfskill
On Mon, May 10, 2010 at 02:32:14PM -0700, K. Macy wrote:
 Could you please try with 207902?
 ...

I saved that environment (documented elsewhere ini the thread), then
performed the normal (for me) daily update, this time, to r207911.

Again, I see a panic during transition from single-user mode to
multi-user mode:

...
 3  Select option, [Enter] for default 3
 3  or [Space] to pause timer  9   3
 @DY


GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #156 r207911: Tue May 11 05:55:18 PDT 2010
r...@freebeast.catwhisker.org:/usr/obj/usr/src/sys/GENERIC i386
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter i8254 frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.60GHz (3614.55-MHz 686-class CPU)
  Origin = GenuineIntel  Id = 0xf41  Family = f  Model = 4  Stepping = 1
  
Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE
  Features2=0x659dSSE3,DTES64,MON,DS_CPL,EST,TM2,CNXT-ID,CX16,xTPR
  AMD Features=0x2010NX,LM
  TSC: P-state invariant
real memory  = 2147483648 (2048 MB)
avail memory = 2086129664 (1989 MB)
ACPI APIC Table: PTLTD  APIC  
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 2 package(s) x 1 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  6
ioapic0 Version 2.0 irqs 0-23 on motherboard
ioapic1 Version 2.0 irqs 24-47 on motherboard
ioapic2 Version 2.0 irqs 48-71 on motherboard
kbd1 at kbdmux0
acpi0: PTLTD   RSDT on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter ACPI-fast frequency 3579545 Hz quality 1000
acpi_timer0: 24-bit timer at 3.579545MHz port 0x1008-0x100b on acpi0
cpu0: ACPI CPU on acpi0
cpu1: ACPI CPU on acpi0
pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0
pci0: ACPI PCI bus on pcib0
pci0: unknown at device 0.1 (no driver attached)
pci0: base peripheral at device 1.0 (no driver attached)
pcib1: ACPI PCI-PCI bridge irq 16 at device 2.0 on pci0
pci1: ACPI PCI bus on pcib1
pcib2: ACPI PCI-PCI bridge at device 0.0 on pci1
pci2: ACPI PCI bus on pcib2
aac0: Adaptec SCSI RAID 2200S mem 0xdc00-0xdfff irq 24 at device 1.0 
on pci2
aac0: Enable Raw I/O
aac0: New comm. interface enabled
aac0: [ITHREAD]
aac0: Adaptec 2200S, aac driver 2.1.9-1
aacp0: SCSI Passthrough Bus on aac0
aacp1: SCSI Passthrough Bus on aac0
pcib3: ACPI PCI-PCI bridge at device 0.2 on pci1
pci3: ACPI PCI bus on pcib3
em0: Intel(R) PRO/1000 Legacy Network Connection 1.0.1 port 0x2000-0x203f mem 
0xd820-0xd821 irq 54 at device 2.0 on pci3
em0: [FILTER]
em0: Ethernet address: 00:30:48:2d:32:6a
em1: Intel(R) PRO/1000 Legacy Network Connection 1.0.1 port 0x2040-0x207f mem 
0xd822-0xd823 irq 55 at device 2.1 on pci3
em1: [FILTER]
em1: Ethernet address: 00:30:48:2d:32:6b
pcib4: ACPI PCI-PCI bridge irq 16 at device 4.0 on pci0
pci4: ACPI PCI bus on pcib4
pcib5: ACPI PCI-PCI bridge irq 16 at device 6.0 on pci0
pci5: ACPI PCI bus on pcib5
uhci0: Intel 82801EB (ICH5) USB controller USB-A port 0x1400-0x141f irq 16 at 
device 29.0 on pci0
uhci0: [ITHREAD]
usbus0: Intel 82801EB (ICH5) USB controller USB-A on uhci0
uhci1: Intel 82801EB (ICH5) USB controller USB-B port 0x1420-0x143f irq 19 at 
device 29.1 on pci0
uhci1: [ITHREAD]
usbus1: Intel 82801EB (ICH5) USB controller USB-B on uhci1
uhci2: Intel 82801EB (ICH5) USB controller USB-C port 0x1440-0x145f irq 18 at 
device 29.2 on pci0
uhci2: [ITHREAD]
usbus2: Intel 82801EB (ICH5) USB controller USB-C on uhci2
uhci3: Intel 82801EB (ICH5) USB controller USB-D port 0x1460-0x147f irq 16 at 
device 29.3 on pci0
uhci3: [ITHREAD]
usbus3: Intel 82801EB (ICH5) USB controller USB-D on uhci3
ehci0: Intel 82801EB/R (ICH5) USB 2.0 controller mem 0xd8001000-0xd80013ff 
irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: Intel 82801EB/R (ICH5) USB 2.0 controller on ehci0
pcib6: ACPI PCI-PCI bridge at device 30.0 on pci0
pci6: ACPI PCI bus on pcib6
vgapci0: VGA-compatible display port 0x3000-0x30ff mem 
0xd900-0xd9ff,0xd830-0xd8300fff irq 17 at device 1.0 on pci6
isab0: PCI-ISA bridge at device 31.0 on pci0
isa0: ISA bus on isab0
atapci0: Intel ICH5 UDMA100 controller port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x14a0-0x14af at device 31.1 on pci0
ata0: ATA channel 0 on atapci0
ata0: [ITHREAD]
ata1: ATA channel 1 on atapci0
ata1: [ITHREAD]
pci0: serial bus, SMBus at device 31.3 (no driver attached)
acpi_button0: Power Button on acpi0
atrtc0: AT realtime clock port 0x70-0x77 irq 8 on acpi0
atkbdc0: Keyboard controller (i8042) port 0x60,0x64 irq 1 on acpi0
atkbd0: AT Keyboard irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: 

Re: Panic @r207844; current process: flowcleaner Fatal trap 12: page fault while in kernel mode

2010-05-11 Thread K. Macy
Please try 207949 

Thanks,
Kip



On Tue, May 11, 2010 at 6:18 AM, David Wolfskill da...@catwhisker.org wrote:
 On Mon, May 10, 2010 at 02:32:14PM -0700, K. Macy wrote:
 Could you please try with 207902?
 ...

 I saved that environment (documented elsewhere ini the thread), then
 performed the normal (for me) daily update, this time, to r207911.

 Again, I see a panic during transition from single-user mode to
 multi-user mode:

 ...
  3  Select option, [Enter] for default     3
  3  or [Space] to pause timer  9           3
 �...@dy


 GDB: no debug ports present
 KDB: debugger backends: ddb
 KDB: current backend: ddb
 Copyright (c) 1992-2010 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
 FreeBSD is a registered trademark of The FreeBSD Foundation.
 FreeBSD 9.0-CURRENT #156 r207911: Tue May 11 05:55:18 PDT 2010
    r...@freebeast.catwhisker.org:/usr/obj/usr/src/sys/GENERIC i386
 WARNING: WITNESS option enabled, expect reduced performance.
 Timecounter i8254 frequency 1193182 Hz quality 0
 CPU: Intel(R) Xeon(TM) CPU 3.60GHz (3614.55-MHz 686-class CPU)
  Origin = GenuineIntel  Id = 0xf41  Family = f  Model = 4  Stepping = 1
  Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE
  Features2=0x659dSSE3,DTES64,MON,DS_CPL,EST,TM2,CNXT-ID,CX16,xTPR
  AMD Features=0x2010NX,LM
  TSC: P-state invariant
 real memory  = 2147483648 (2048 MB)
 avail memory = 2086129664 (1989 MB)
 ACPI APIC Table: PTLTD          APIC  
 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 FreeBSD/SMP: 2 package(s) x 1 core(s)
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  6
 ioapic0 Version 2.0 irqs 0-23 on motherboard
 ioapic1 Version 2.0 irqs 24-47 on motherboard
 ioapic2 Version 2.0 irqs 48-71 on motherboard
 kbd1 at kbdmux0
 acpi0: PTLTD   RSDT on motherboard
 acpi0: [ITHREAD]
 acpi0: Power Button (fixed)
 Timecounter ACPI-fast frequency 3579545 Hz quality 1000
 acpi_timer0: 24-bit timer at 3.579545MHz port 0x1008-0x100b on acpi0
 cpu0: ACPI CPU on acpi0
 cpu1: ACPI CPU on acpi0
 pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0
 pci0: ACPI PCI bus on pcib0
 pci0: unknown at device 0.1 (no driver attached)
 pci0: base peripheral at device 1.0 (no driver attached)
 pcib1: ACPI PCI-PCI bridge irq 16 at device 2.0 on pci0
 pci1: ACPI PCI bus on pcib1
 pcib2: ACPI PCI-PCI bridge at device 0.0 on pci1
 pci2: ACPI PCI bus on pcib2
 aac0: Adaptec SCSI RAID 2200S mem 0xdc00-0xdfff irq 24 at device 
 1.0 on pci2
 aac0: Enable Raw I/O
 aac0: New comm. interface enabled
 aac0: [ITHREAD]
 aac0: Adaptec 2200S, aac driver 2.1.9-1
 aacp0: SCSI Passthrough Bus on aac0
 aacp1: SCSI Passthrough Bus on aac0
 pcib3: ACPI PCI-PCI bridge at device 0.2 on pci1
 pci3: ACPI PCI bus on pcib3
 em0: Intel(R) PRO/1000 Legacy Network Connection 1.0.1 port 0x2000-0x203f 
 mem 0xd820-0xd821 irq 54 at device 2.0 on pci3
 em0: [FILTER]
 em0: Ethernet address: 00:30:48:2d:32:6a
 em1: Intel(R) PRO/1000 Legacy Network Connection 1.0.1 port 0x2040-0x207f 
 mem 0xd822-0xd823 irq 55 at device 2.1 on pci3
 em1: [FILTER]
 em1: Ethernet address: 00:30:48:2d:32:6b
 pcib4: ACPI PCI-PCI bridge irq 16 at device 4.0 on pci0
 pci4: ACPI PCI bus on pcib4
 pcib5: ACPI PCI-PCI bridge irq 16 at device 6.0 on pci0
 pci5: ACPI PCI bus on pcib5
 uhci0: Intel 82801EB (ICH5) USB controller USB-A port 0x1400-0x141f irq 16 
 at device 29.0 on pci0
 uhci0: [ITHREAD]
 usbus0: Intel 82801EB (ICH5) USB controller USB-A on uhci0
 uhci1: Intel 82801EB (ICH5) USB controller USB-B port 0x1420-0x143f irq 19 
 at device 29.1 on pci0
 uhci1: [ITHREAD]
 usbus1: Intel 82801EB (ICH5) USB controller USB-B on uhci1
 uhci2: Intel 82801EB (ICH5) USB controller USB-C port 0x1440-0x145f irq 18 
 at device 29.2 on pci0
 uhci2: [ITHREAD]
 usbus2: Intel 82801EB (ICH5) USB controller USB-C on uhci2
 uhci3: Intel 82801EB (ICH5) USB controller USB-D port 0x1460-0x147f irq 16 
 at device 29.3 on pci0
 uhci3: [ITHREAD]
 usbus3: Intel 82801EB (ICH5) USB controller USB-D on uhci3
 ehci0: Intel 82801EB/R (ICH5) USB 2.0 controller mem 0xd8001000-0xd80013ff 
 irq 23 at device 29.7 on pci0
 ehci0: [ITHREAD]
 usbus4: EHCI version 1.0
 usbus4: Intel 82801EB/R (ICH5) USB 2.0 controller on ehci0
 pcib6: ACPI PCI-PCI bridge at device 30.0 on pci0
 pci6: ACPI PCI bus on pcib6
 vgapci0: VGA-compatible display port 0x3000-0x30ff mem 
 0xd900-0xd9ff,0xd830-0xd8300fff irq 17 at device 1.0 on pci6
 isab0: PCI-ISA bridge at device 31.0 on pci0
 isa0: ISA bus on isab0
 atapci0: Intel ICH5 UDMA100 controller port 
 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x14a0-0x14af at device 31.1 on pci0
 ata0: ATA channel 0 on atapci0
 ata0: [ITHREAD]
 ata1: ATA channel 1 on atapci0
 ata1: [ITHREAD]
 pci0: serial bus, SMBus at device 31.3 (no driver attached)
 

Re: Panic @r207844; current process: flowcleaner Fatal trap 12: page fault while in kernel mode

2010-05-11 Thread David Wolfskill
On Tue, May 11, 2010 at 08:30:09PM -0700, K. Macy wrote:
 Please try 207949 
 ...

The panic (this time) didn't show up until about 10 seconds after the
login: prompt showed up on the serial console.  Here's what it looks
like:

...
 3  Select option, [Enter] for default 3
 3  or [Space] to pause timer  9   3
 @DY


GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #157 r207911M: Tue May 11 20:54:25 PDT 2010
r...@freebeast.catwhisker.org:/usr/obj/usr/src/sys/GENERIC i386
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter i8254 frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.60GHz (3614.55-MHz 686-class CPU)
  Origin = GenuineIntel  Id = 0xf41  Family = f  Model = 4  Stepping = 1
  
Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE
  Features2=0x659dSSE3,DTES64,MON,DS_CPL,EST,TM2,CNXT-ID,CX16,xTPR
  AMD Features=0x2010NX,LM
  TSC: P-state invariant
real memory  = 2147483648 (2048 MB)
avail memory = 2086129664 (1989 MB)
ACPI APIC Table: PTLTD  APIC  
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 2 package(s) x 1 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  6
ioapic0 Version 2.0 irqs 0-23 on motherboard
ioapic1 Version 2.0 irqs 24-47 on motherboard
ioapic2 Version 2.0 irqs 48-71 on motherboard
kbd1 at kbdmux0
acpi0: PTLTD   RSDT on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter ACPI-fast frequency 3579545 Hz quality 1000
acpi_timer0: 24-bit timer at 3.579545MHz port 0x1008-0x100b on acpi0
cpu0: ACPI CPU on acpi0
cpu1: ACPI CPU on acpi0
pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0
pci0: ACPI PCI bus on pcib0
pci0: unknown at device 0.1 (no driver attached)
pci0: base peripheral at device 1.0 (no driver attached)
pcib1: ACPI PCI-PCI bridge irq 16 at device 2.0 on pci0
pci1: ACPI PCI bus on pcib1
pcib2: ACPI PCI-PCI bridge at device 0.0 on pci1
pci2: ACPI PCI bus on pcib2
aac0: Adaptec SCSI RAID 2200S mem 0xdc00-0xdfff irq 24 at device 1.0 
on pci2
aac0: Enable Raw I/O
aac0: New comm. interface enabled
aac0: [ITHREAD]
aac0: Adaptec 2200S, aac driver 2.1.9-1
aacp0: SCSI Passthrough Bus on aac0
aacp1: SCSI Passthrough Bus on aac0
pcib3: ACPI PCI-PCI bridge at device 0.2 on pci1
pci3: ACPI PCI bus on pcib3
em0: Intel(R) PRO/1000 Legacy Network Connection 1.0.1 port 0x2000-0x203f mem 
0xd820-0xd821 irq 54 at device 2.0 on pci3
em0: [FILTER]
em0: Ethernet address: 00:30:48:2d:32:6a
em1: Intel(R) PRO/1000 Legacy Network Connection 1.0.1 port 0x2040-0x207f mem 
0xd822-0xd823 irq 55 at device 2.1 on pci3
em1: [FILTER]
em1: Ethernet address: 00:30:48:2d:32:6b
pcib4: ACPI PCI-PCI bridge irq 16 at device 4.0 on pci0
pci4: ACPI PCI bus on pcib4
pcib5: ACPI PCI-PCI bridge irq 16 at device 6.0 on pci0
pci5: ACPI PCI bus on pcib5
uhci0: Intel 82801EB (ICH5) USB controller USB-A port 0x1400-0x141f irq 16 at 
device 29.0 on pci0
uhci0: [ITHREAD]
usbus0: Intel 82801EB (ICH5) USB controller USB-A on uhci0
uhci1: Intel 82801EB (ICH5) USB controller USB-B port 0x1420-0x143f irq 19 at 
device 29.1 on pci0
uhci1: [ITHREAD]
usbus1: Intel 82801EB (ICH5) USB controller USB-B on uhci1
uhci2: Intel 82801EB (ICH5) USB controller USB-C port 0x1440-0x145f irq 18 at 
device 29.2 on pci0
uhci2: [ITHREAD]
usbus2: Intel 82801EB (ICH5) USB controller USB-C on uhci2
uhci3: Intel 82801EB (ICH5) USB controller USB-D port 0x1460-0x147f irq 16 at 
device 29.3 on pci0
uhci3: [ITHREAD]
usbus3: Intel 82801EB (ICH5) USB controller USB-D on uhci3
ehci0: Intel 82801EB/R (ICH5) USB 2.0 controller mem 0xd8001000-0xd80013ff 
irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: Intel 82801EB/R (ICH5) USB 2.0 controller on ehci0
pcib6: ACPI PCI-PCI bridge at device 30.0 on pci0
pci6: ACPI PCI bus on pcib6
vgapci0: VGA-compatible display port 0x3000-0x30ff mem 
0xd900-0xd9ff,0xd830-0xd8300fff irq 17 at device 1.0 on pci6
isab0: PCI-ISA bridge at device 31.0 on pci0
isa0: ISA bus on isab0
atapci0: Intel ICH5 UDMA100 controller port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x14a0-0x14af at device 31.1 on pci0
ata0: ATA channel 0 on atapci0
ata0: [ITHREAD]
ata1: ATA channel 1 on atapci0
ata1: [ITHREAD]
pci0: serial bus, SMBus at device 31.3 (no driver attached)
acpi_button0: Power Button on acpi0
atrtc0: AT realtime clock port 0x70-0x77 irq 8 on acpi0
atkbdc0: Keyboard controller (i8042) port 0x60,0x64 irq 1 on acpi0
atkbd0: AT Keyboard irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: PS/2 Mouse irq 12 on atkbdc0
psm0: 

Re: Panic @r207844; current process: flowcleaner Fatal trap 12: page fault while in kernel mode

2010-05-11 Thread K. Macy
On Tue, May 11, 2010 at 9:24 PM, David Wolfskill da...@catwhisker.org wrote:
 On Tue, May 11, 2010 at 08:30:09PM -0700, K. Macy wrote:
 Please try 207949 
 ...

 The panic (this time) didn't show up until about 10 seconds after the
 login: prompt showed up on the serial console.  Here's what it looks
 like:

 ...
  3  Select option, [Enter] for default     3
  3  or [Space] to pause timer  9           3
 �...@dy


 GDB: no debug ports present
 KDB: debugger backends: ddb
 KDB: current backend: ddb
 Copyright (c) 1992-2010 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
 FreeBSD is a registered trademark of The FreeBSD Foundation.
 FreeBSD 9.0-CURRENT #157 r207911M: Tue May 11 20:54:25 PDT 2010
    r...@freebeast.catwhisker.org:/usr/obj/usr/src/sys/GENERIC i386
 WARNING: WITNESS option enabled, expect reduced performance.
 Timecounter i8254 frequency 1193182 Hz quality 0
 CPU: Intel(R) Xeon(TM) CPU 3.60GHz (3614.55-MHz 686-class CPU)
  Origin = GenuineIntel  Id = 0xf41  Family = f  Model = 4  Stepping = 1
  Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE
  Features2=0x659dSSE3,DTES64,MON,DS_CPL,EST,TM2,CNXT-ID,CX16,xTPR
  AMD Features=0x2010NX,LM
  TSC: P-state invariant
 real memory  = 2147483648 (2048 MB)
 avail memory = 2086129664 (1989 MB)
 ACPI APIC Table: PTLTD          APIC  
 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 FreeBSD/SMP: 2 package(s) x 1 core(s)
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  6
 ioapic0 Version 2.0 irqs 0-23 on motherboard
 ioapic1 Version 2.0 irqs 24-47 on motherboard
 ioapic2 Version 2.0 irqs 48-71 on motherboard
 kbd1 at kbdmux0
 acpi0: PTLTD   RSDT on motherboard
 acpi0: [ITHREAD]
 acpi0: Power Button (fixed)
 Timecounter ACPI-fast frequency 3579545 Hz quality 1000
 acpi_timer0: 24-bit timer at 3.579545MHz port 0x1008-0x100b on acpi0
 cpu0: ACPI CPU on acpi0
 cpu1: ACPI CPU on acpi0
 pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0
 pci0: ACPI PCI bus on pcib0
 pci0: unknown at device 0.1 (no driver attached)
 pci0: base peripheral at device 1.0 (no driver attached)
 pcib1: ACPI PCI-PCI bridge irq 16 at device 2.0 on pci0
 pci1: ACPI PCI bus on pcib1
 pcib2: ACPI PCI-PCI bridge at device 0.0 on pci1
 pci2: ACPI PCI bus on pcib2
 aac0: Adaptec SCSI RAID 2200S mem 0xdc00-0xdfff irq 24 at device 
 1.0 on pci2
 aac0: Enable Raw I/O
 aac0: New comm. interface enabled
 aac0: [ITHREAD]
 aac0: Adaptec 2200S, aac driver 2.1.9-1
 aacp0: SCSI Passthrough Bus on aac0
 aacp1: SCSI Passthrough Bus on aac0
 pcib3: ACPI PCI-PCI bridge at device 0.2 on pci1
 pci3: ACPI PCI bus on pcib3
 em0: Intel(R) PRO/1000 Legacy Network Connection 1.0.1 port 0x2000-0x203f 
 mem 0xd820-0xd821 irq 54 at device 2.0 on pci3
 em0: [FILTER]
 em0: Ethernet address: 00:30:48:2d:32:6a
 em1: Intel(R) PRO/1000 Legacy Network Connection 1.0.1 port 0x2040-0x207f 
 mem 0xd822-0xd823 irq 55 at device 2.1 on pci3
 em1: [FILTER]
 em1: Ethernet address: 00:30:48:2d:32:6b
 pcib4: ACPI PCI-PCI bridge irq 16 at device 4.0 on pci0
 pci4: ACPI PCI bus on pcib4
 pcib5: ACPI PCI-PCI bridge irq 16 at device 6.0 on pci0
 pci5: ACPI PCI bus on pcib5
 uhci0: Intel 82801EB (ICH5) USB controller USB-A port 0x1400-0x141f irq 16 
 at device 29.0 on pci0
 uhci0: [ITHREAD]
 usbus0: Intel 82801EB (ICH5) USB controller USB-A on uhci0
 uhci1: Intel 82801EB (ICH5) USB controller USB-B port 0x1420-0x143f irq 19 
 at device 29.1 on pci0
 uhci1: [ITHREAD]
 usbus1: Intel 82801EB (ICH5) USB controller USB-B on uhci1
 uhci2: Intel 82801EB (ICH5) USB controller USB-C port 0x1440-0x145f irq 18 
 at device 29.2 on pci0
 uhci2: [ITHREAD]
 usbus2: Intel 82801EB (ICH5) USB controller USB-C on uhci2
 uhci3: Intel 82801EB (ICH5) USB controller USB-D port 0x1460-0x147f irq 16 
 at device 29.3 on pci0
 uhci3: [ITHREAD]
 usbus3: Intel 82801EB (ICH5) USB controller USB-D on uhci3
 ehci0: Intel 82801EB/R (ICH5) USB 2.0 controller mem 0xd8001000-0xd80013ff 
 irq 23 at device 29.7 on pci0
 ehci0: [ITHREAD]
 usbus4: EHCI version 1.0
 usbus4: Intel 82801EB/R (ICH5) USB 2.0 controller on ehci0
 pcib6: ACPI PCI-PCI bridge at device 30.0 on pci0
 pci6: ACPI PCI bus on pcib6
 vgapci0: VGA-compatible display port 0x3000-0x30ff mem 
 0xd900-0xd9ff,0xd830-0xd8300fff irq 17 at device 1.0 on pci6
 isab0: PCI-ISA bridge at device 31.0 on pci0
 isa0: ISA bus on isab0
 atapci0: Intel ICH5 UDMA100 controller port 
 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x14a0-0x14af at device 31.1 on pci0
 ata0: ATA channel 0 on atapci0
 ata0: [ITHREAD]
 ata1: ATA channel 1 on atapci0
 ata1: [ITHREAD]
 pci0: serial bus, SMBus at device 31.3 (no driver attached)
 acpi_button0: Power Button on acpi0
 atrtc0: AT realtime clock port 0x70-0x77 irq 8 on acpi0
 atkbdc0: Keyboard controller 

Re: Panic @r207844; current process: flowcleaner Fatal trap 12: page fault while in kernel mode

2010-05-10 Thread David Wolfskill
On Mon, May 10, 2010 at 08:22:43PM +0200, Ed Schouten wrote:
 ...
 You don't happen to have a backtrace?

Oops -- sorry; got caught up in getting ready to head in to work:

db bt
Tracing pid 20 tid 100067 td 0xc5a19000
_mtx_lock_flags(58,0,c0cd2d5b,570,80,...) at _mtx_lock_flags+0x46
flowtable_free_stale(c0e28f40,0,c0cd2d5b,600,0,...) at 
flowtable_free_stale+0x2fb
flowtable_cleaner(0,e9bc6d38,c0cbf058,343,c5f362a8,...) at 
flowtable_cleaner+0xd0
fork_exit(c094f920,0,e9bc6d38) at fork_exit+0xb8
fork_trampoline() at fork_trampoline+0x8
--- trap 0, eip = 0, esp = 0xe9bc6d70, ebp = 0 ---
db 

Anything else that might be useful or interesting, please let me
know; as noted earlier, I left the machine in that state.  (I
normally power it off after the morning's  build/test festivities,
as it's loud  uses a fair amount of power.)

Peace,
david
-- 
David H. Wolfskill  da...@catwhisker.org
Depriving a girl or boy of an opportunity for education is evil.

See http://www.catwhisker.org/~david/publickey.gpg for my public key.


pgpHvtGLX3oQp.pgp
Description: PGP signature


Re: Panic @r207844; current process: flowcleaner Fatal trap 12: page fault while in kernel mode

2010-05-10 Thread K. Macy
Could you please try with 207902?

Thanks,
Kip

On Mon, May 10, 2010 at 11:26 AM, David Wolfskill da...@catwhisker.org wrote:
 On Mon, May 10, 2010 at 08:22:43PM +0200, Ed Schouten wrote:
 ...
 You don't happen to have a backtrace?

 Oops -- sorry; got caught up in getting ready to head in to work:

 db bt
 Tracing pid 20 tid 100067 td 0xc5a19000
 _mtx_lock_flags(58,0,c0cd2d5b,570,80,...) at _mtx_lock_flags+0x46
 flowtable_free_stale(c0e28f40,0,c0cd2d5b,600,0,...) at 
 flowtable_free_stale+0x2fb
 flowtable_cleaner(0,e9bc6d38,c0cbf058,343,c5f362a8,...) at 
 flowtable_cleaner+0xd0
 fork_exit(c094f920,0,e9bc6d38) at fork_exit+0xb8
 fork_trampoline() at fork_trampoline+0x8
 --- trap 0, eip = 0, esp = 0xe9bc6d70, ebp = 0 ---
 db

 Anything else that might be useful or interesting, please let me
 know; as noted earlier, I left the machine in that state.  (I
 normally power it off after the morning's  build/test festivities,
 as it's loud  uses a fair amount of power.)

 Peace,
 david
 --
 David H. Wolfskill                              da...@catwhisker.org
 Depriving a girl or boy of an opportunity for education is evil.

 See http://www.catwhisker.org/~david/publickey.gpg for my public key.

___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org


Re: Panic @r207844; current process: flowcleaner Fatal trap 12: page fault while in kernel mode

2010-05-10 Thread K. Macy
On Mon, May 10, 2010 at 2:32 PM, K. Macy km...@freebsd.org wrote:
 Could you please try with 207902?

And if not, please get a coredump with a backtrace with symbols.

Thanks
___
freebsd-current@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-current
To unsubscribe, send any mail to freebsd-current-unsubscr...@freebsd.org


Re: Panic @r207844; current process: flowcleaner Fatal trap 12: page fault while in kernel mode

2010-05-10 Thread David Wolfskill
On Mon, May 10, 2010 at 02:32:14PM -0700, K. Macy wrote:
 Could you please try with 207902?
 ...

First, thanks for the response.

OK; I grabbed r207902  applied it (via patch -p1), then rebuilt the
kernel  rebooted; here's the panic now:

 3  Select option, [Enter] for default 3
 3  or [Space] to pause timer  9   3
 @DY


GDB: no debug ports present
KDB: debugger backends: ddb
KDB: current backend: ddb
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-CURRENT #155 r207844M: Mon May 10 14:55:41 PDT 2010
r...@freebeast.catwhisker.org:/usr/obj/usr/src/sys/GENERIC i386
WARNING: WITNESS option enabled, expect reduced performance.
Timecounter i8254 frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.60GHz (3610.95-MHz 686-class CPU)
  Origin = GenuineIntel  Id = 0xf41  Family = f  Model = 4  Stepping = 1
  
Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE
  Features2=0x659dSSE3,DTES64,MON,DS_CPL,EST,TM2,CNXT-ID,CX16,xTPR
  AMD Features=0x2010NX,LM
  TSC: P-state invariant
real memory  = 2147483648 (2048 MB)
avail memory = 2086129664 (1989 MB)
ACPI APIC Table: PTLTD  APIC  
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 2 package(s) x 1 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  6
ioapic0 Version 2.0 irqs 0-23 on motherboard
ioapic1 Version 2.0 irqs 24-47 on motherboard
ioapic2 Version 2.0 irqs 48-71 on motherboard
kbd1 at kbdmux0
acpi0: PTLTD   RSDT on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter ACPI-fast frequency 3579545 Hz quality 1000
acpi_timer0: 24-bit timer at 3.579545MHz port 0x1008-0x100b on acpi0
cpu0: ACPI CPU on acpi0
cpu1: ACPI CPU on acpi0
pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0
pci0: ACPI PCI bus on pcib0
pci0: unknown at device 0.1 (no driver attached)
pci0: base peripheral at device 1.0 (no driver attached)
pcib1: ACPI PCI-PCI bridge irq 16 at device 2.0 on pci0
pci1: ACPI PCI bus on pcib1
pcib2: ACPI PCI-PCI bridge at device 0.0 on pci1
pci2: ACPI PCI bus on pcib2
aac0: Adaptec SCSI RAID 2200S mem 0xdc00-0xdfff irq 24 at device 1.0 
on pci2
aac0: Enable Raw I/O
aac0: New comm. interface enabled
aac0: [ITHREAD]
aac0: Adaptec 2200S, aac driver 2.1.9-1
aacp0: SCSI Passthrough Bus on aac0
aacp1: SCSI Passthrough Bus on aac0
pcib3: ACPI PCI-PCI bridge at device 0.2 on pci1
pci3: ACPI PCI bus on pcib3
em0: Intel(R) PRO/1000 Legacy Network Connection 1.0.1 port 0x2000-0x203f mem 
0xd820-0xd821 irq 54 at device 2.0 on pci3
em0: [FILTER]
em0: Ethernet address: 00:30:48:2d:32:6a
em1: Intel(R) PRO/1000 Legacy Network Connection 1.0.1 port 0x2040-0x207f mem 
0xd822-0xd823 irq 55 at device 2.1 on pci3
em1: [FILTER]
em1: Ethernet address: 00:30:48:2d:32:6b
pcib4: ACPI PCI-PCI bridge irq 16 at device 4.0 on pci0
pci4: ACPI PCI bus on pcib4
pcib5: ACPI PCI-PCI bridge irq 16 at device 6.0 on pci0
pci5: ACPI PCI bus on pcib5
uhci0: Intel 82801EB (ICH5) USB controller USB-A port 0x1400-0x141f irq 16 at 
device 29.0 on pci0
uhci0: [ITHREAD]
usbus0: Intel 82801EB (ICH5) USB controller USB-A on uhci0
uhci1: Intel 82801EB (ICH5) USB controller USB-B port 0x1420-0x143f irq 19 at 
device 29.1 on pci0
uhci1: [ITHREAD]
usbus1: Intel 82801EB (ICH5) USB controller USB-B on uhci1
uhci2: Intel 82801EB (ICH5) USB controller USB-C port 0x1440-0x145f irq 18 at 
device 29.2 on pci0
uhci2: [ITHREAD]
usbus2: Intel 82801EB (ICH5) USB controller USB-C on uhci2
uhci3: Intel 82801EB (ICH5) USB controller USB-D port 0x1460-0x147f irq 16 at 
device 29.3 on pci0
uhci3: [ITHREAD]
usbus3: Intel 82801EB (ICH5) USB controller USB-D on uhci3
ehci0: Intel 82801EB/R (ICH5) USB 2.0 controller mem 0xd8001000-0xd80013ff 
irq 23 at device 29.7 on pci0
ehci0: [ITHREAD]
usbus4: EHCI version 1.0
usbus4: Intel 82801EB/R (ICH5) USB 2.0 controller on ehci0
pcib6: ACPI PCI-PCI bridge at device 30.0 on pci0
pci6: ACPI PCI bus on pcib6
vgapci0: VGA-compatible display port 0x3000-0x30ff mem 
0xd900-0xd9ff,0xd830-0xd8300fff irq 17 at device 1.0 on pci6
isab0: PCI-ISA bridge at device 31.0 on pci0
isa0: ISA bus on isab0
atapci0: Intel ICH5 UDMA100 controller port 
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x14a0-0x14af at device 31.1 on pci0
ata0: ATA channel 0 on atapci0
ata0: [ITHREAD]
ata1: ATA channel 1 on atapci0
ata1: [ITHREAD]
pci0: serial bus, SMBus at device 31.3 (no driver attached)
acpi_button0: Power Button on acpi0
atrtc0: AT realtime clock port 0x70-0x77 irq 8 on acpi0
atkbdc0: Keyboard controller (i8042) port 0x60,0x64 irq 1 on acpi0
atkbd0: AT Keyboard irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: PS/2 Mouse irq 12 on atkbdc0
psm0: 

Re: Panic @r207844; current process: flowcleaner Fatal trap 12: page fault while in kernel mode

2010-05-10 Thread K. Macy
Are you not able to dump core?

Thanks,
Kip

On Mon, May 10, 2010 at 3:08 PM, David Wolfskill da...@catwhisker.org wrote:
 On Mon, May 10, 2010 at 02:32:14PM -0700, K. Macy wrote:
 Could you please try with 207902?
 ...

 First, thanks for the response.

 OK; I grabbed r207902  applied it (via patch -p1), then rebuilt the
 kernel  rebooted; here's the panic now:

  3  Select option, [Enter] for default     3
  3  or [Space] to pause timer  9           3
 �...@dy


 GDB: no debug ports present
 KDB: debugger backends: ddb
 KDB: current backend: ddb
 Copyright (c) 1992-2010 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
 FreeBSD is a registered trademark of The FreeBSD Foundation.
 FreeBSD 9.0-CURRENT #155 r207844M: Mon May 10 14:55:41 PDT 2010
    r...@freebeast.catwhisker.org:/usr/obj/usr/src/sys/GENERIC i386
 WARNING: WITNESS option enabled, expect reduced performance.
 Timecounter i8254 frequency 1193182 Hz quality 0
 CPU: Intel(R) Xeon(TM) CPU 3.60GHz (3610.95-MHz 686-class CPU)
  Origin = GenuineIntel  Id = 0xf41  Family = f  Model = 4  Stepping = 1
  Features=0xbfebfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE
  Features2=0x659dSSE3,DTES64,MON,DS_CPL,EST,TM2,CNXT-ID,CX16,xTPR
  AMD Features=0x2010NX,LM
  TSC: P-state invariant
 real memory  = 2147483648 (2048 MB)
 avail memory = 2086129664 (1989 MB)
 ACPI APIC Table: PTLTD          APIC  
 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 FreeBSD/SMP: 2 package(s) x 1 core(s)
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  6
 ioapic0 Version 2.0 irqs 0-23 on motherboard
 ioapic1 Version 2.0 irqs 24-47 on motherboard
 ioapic2 Version 2.0 irqs 48-71 on motherboard
 kbd1 at kbdmux0
 acpi0: PTLTD   RSDT on motherboard
 acpi0: [ITHREAD]
 acpi0: Power Button (fixed)
 Timecounter ACPI-fast frequency 3579545 Hz quality 1000
 acpi_timer0: 24-bit timer at 3.579545MHz port 0x1008-0x100b on acpi0
 cpu0: ACPI CPU on acpi0
 cpu1: ACPI CPU on acpi0
 pcib0: ACPI Host-PCI bridge port 0xcf8-0xcff on acpi0
 pci0: ACPI PCI bus on pcib0
 pci0: unknown at device 0.1 (no driver attached)
 pci0: base peripheral at device 1.0 (no driver attached)
 pcib1: ACPI PCI-PCI bridge irq 16 at device 2.0 on pci0
 pci1: ACPI PCI bus on pcib1
 pcib2: ACPI PCI-PCI bridge at device 0.0 on pci1
 pci2: ACPI PCI bus on pcib2
 aac0: Adaptec SCSI RAID 2200S mem 0xdc00-0xdfff irq 24 at device 
 1.0 on pci2
 aac0: Enable Raw I/O
 aac0: New comm. interface enabled
 aac0: [ITHREAD]
 aac0: Adaptec 2200S, aac driver 2.1.9-1
 aacp0: SCSI Passthrough Bus on aac0
 aacp1: SCSI Passthrough Bus on aac0
 pcib3: ACPI PCI-PCI bridge at device 0.2 on pci1
 pci3: ACPI PCI bus on pcib3
 em0: Intel(R) PRO/1000 Legacy Network Connection 1.0.1 port 0x2000-0x203f 
 mem 0xd820-0xd821 irq 54 at device 2.0 on pci3
 em0: [FILTER]
 em0: Ethernet address: 00:30:48:2d:32:6a
 em1: Intel(R) PRO/1000 Legacy Network Connection 1.0.1 port 0x2040-0x207f 
 mem 0xd822-0xd823 irq 55 at device 2.1 on pci3
 em1: [FILTER]
 em1: Ethernet address: 00:30:48:2d:32:6b
 pcib4: ACPI PCI-PCI bridge irq 16 at device 4.0 on pci0
 pci4: ACPI PCI bus on pcib4
 pcib5: ACPI PCI-PCI bridge irq 16 at device 6.0 on pci0
 pci5: ACPI PCI bus on pcib5
 uhci0: Intel 82801EB (ICH5) USB controller USB-A port 0x1400-0x141f irq 16 
 at device 29.0 on pci0
 uhci0: [ITHREAD]
 usbus0: Intel 82801EB (ICH5) USB controller USB-A on uhci0
 uhci1: Intel 82801EB (ICH5) USB controller USB-B port 0x1420-0x143f irq 19 
 at device 29.1 on pci0
 uhci1: [ITHREAD]
 usbus1: Intel 82801EB (ICH5) USB controller USB-B on uhci1
 uhci2: Intel 82801EB (ICH5) USB controller USB-C port 0x1440-0x145f irq 18 
 at device 29.2 on pci0
 uhci2: [ITHREAD]
 usbus2: Intel 82801EB (ICH5) USB controller USB-C on uhci2
 uhci3: Intel 82801EB (ICH5) USB controller USB-D port 0x1460-0x147f irq 16 
 at device 29.3 on pci0
 uhci3: [ITHREAD]
 usbus3: Intel 82801EB (ICH5) USB controller USB-D on uhci3
 ehci0: Intel 82801EB/R (ICH5) USB 2.0 controller mem 0xd8001000-0xd80013ff 
 irq 23 at device 29.7 on pci0
 ehci0: [ITHREAD]
 usbus4: EHCI version 1.0
 usbus4: Intel 82801EB/R (ICH5) USB 2.0 controller on ehci0
 pcib6: ACPI PCI-PCI bridge at device 30.0 on pci0
 pci6: ACPI PCI bus on pcib6
 vgapci0: VGA-compatible display port 0x3000-0x30ff mem 
 0xd900-0xd9ff,0xd830-0xd8300fff irq 17 at device 1.0 on pci6
 isab0: PCI-ISA bridge at device 31.0 on pci0
 isa0: ISA bus on isab0
 atapci0: Intel ICH5 UDMA100 controller port 
 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x14a0-0x14af at device 31.1 on pci0
 ata0: ATA channel 0 on atapci0
 ata0: [ITHREAD]
 ata1: ATA channel 1 on atapci0
 ata1: [ITHREAD]
 pci0: serial bus, SMBus at device 31.3 (no driver attached)
 acpi_button0: Power Button on acpi0
 atrtc0: AT realtime clock port 

Re: Panic @r207844; current process: flowcleaner Fatal trap 12: page fault while in kernel mode

2010-05-10 Thread David Wolfskill
On Mon, May 10, 2010 at 03:52:07PM -0700, David Wolfskill wrote:
 On Mon, May 10, 2010 at 03:39:11PM -0700, K. Macy wrote:
  Are you not able to dump core?
  
 
 Here's the crash summary; I can put the dump on my Web server on request.
 (It weighs in at 89MB.)
 

Compression reduced the resulting file to 10MB; it may be found at
http://www.catwhisker.org/~david/FreeBSD/vmcore.0.gz.

I'll be leaving the office to head home between 16:50 - 16:55, and I'll
be off-Net until I get home (no earlier than 18:00, but probably before
19:00 -- depending on errands being run).

Peace,
david
-- 
David H. Wolfskill  da...@catwhisker.org
Depriving a girl or boy of an opportunity for education is evil.

See http://www.catwhisker.org/~david/publickey.gpg for my public key.


pgpJaft5n9JXz.pgp
Description: PGP signature