Re: SG116j install crashed
On Sat, Jan 20, 2018 at 08:25:08PM +0900, KIRIYAMA Kazuhiko wrote: > At Thu, 18 Jan 2018 15:35:41 +0900, > my wrote: > > > > Hi, all > > > > I've bought Biccamera's original bland note PC (SG116j) > > impulsively because of cheapness($1780). I've installed > > 12.0-CURRENT(r327788) right away. Booted smoothly but set > > loader conf "unset hint.uart.1.at" and configure disk with > > > > mmcsd0 58 GB GPT > > mmcsd0p1 200MB efi > > mmcsd0p2 54 GB freebsd-ufs / > > mmcsd0p3 4.2 GB freebsd-swapnone > > > > But in "Tetching distribution files" of base.txz, crashed > > with: > > > > sdhci_acpi0-slot0: Controller timeout > > sdhci_acpi0-slot0: == REGISTER DUMP == > > sdhci_acpi0-slot0: Sys addr: 0x02158000 | Version: 0x1002 > > sdhci_acpi0-slot0: Blk size: 0x0200 | Blk cnt: 0x00f8 > > sdhci_acpi0-slot0: Argument: 0x017f57e8 | Trn mode: 0x0027 > > sdhci_acpi0-slot0: Present: 0x1fff0106 | Host ctl: 0x1025 > > sdhci_acpi0-slot0: Power:0x000b | Blk gap: 0x0080 > > sdhci_acpi0-slot0: Wake-up: 0x | Clock:0x0007 > > sdhci_acpi0-slot0: Timeout: 0x0007 | Int stat: 0x0001 > > sdhci_acpi0-slot0: Int enab: 0x05ff0033 | Sig enab: 0x05ff003a > > sdhci_acpi0-slot0: AC12 err: 0x8000 | Host ctl2:0x008b > > sdhci_acpi0-slot0: Caps: 0x446cc8b2 | Caps2:0x0807 > > sdhci_acpi0-slot0: Max curr: 0x | ADMA err: 0x > > sdhci_acpi0-slot0: ADMA addr:0x | Slot int: 0x > > sdhci_acpi0-slot0: === > > mmcsd0: Error indicated: 1 Timeout > > : > > (snip) > > : > > Stopped at kdb_enter+0x3b: movq$0,kdb_why > > db> > > > > Detail log has put in [1]. BTW I used [2] so all stuffs are > > within it and it should not be fetched to internet. > > > > Is there any idea to go forth? > > > > Best regards. > > > > [1] http://35.200.82.201/~kiri/freebsd/sg116j/crash_in_install.jpeg > > [2] FreeBSD-12.0-CURRENT-amd64-20180110-r327788-memstick.img > > I've got r328126 memstic and install with it, then all went > to perfect! Thanx for FreeBSD-CURRENT team! FYI, I believe that you had hit the bug fixed in r327924; sorry about that. Marius ___ freebsd-current@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
Re: SG116j install crashed
At Thu, 18 Jan 2018 15:35:41 +0900, my wrote: > > Hi, all > > I've bought Biccamera's original bland note PC (SG116j) > impulsively because of cheapness($1780). I've installed > 12.0-CURRENT(r327788) right away. Booted smoothly but set > loader conf "unset hint.uart.1.at" and configure disk with > > mmcsd058 GB GPT > mmcsd0p1200MB efi > mmcsd0p254 GB freebsd-ufs / > mmcsd0p34.2 GB freebsd-swapnone > > But in "Tetching distribution files" of base.txz, crashed > with: > > sdhci_acpi0-slot0: Controller timeout > sdhci_acpi0-slot0: == REGISTER DUMP == > sdhci_acpi0-slot0: Sys addr: 0x02158000 | Version: 0x1002 > sdhci_acpi0-slot0: Blk size: 0x0200 | Blk cnt: 0x00f8 > sdhci_acpi0-slot0: Argument: 0x017f57e8 | Trn mode: 0x0027 > sdhci_acpi0-slot0: Present: 0x1fff0106 | Host ctl: 0x1025 > sdhci_acpi0-slot0: Power:0x000b | Blk gap: 0x0080 > sdhci_acpi0-slot0: Wake-up: 0x | Clock:0x0007 > sdhci_acpi0-slot0: Timeout: 0x0007 | Int stat: 0x0001 > sdhci_acpi0-slot0: Int enab: 0x05ff0033 | Sig enab: 0x05ff003a > sdhci_acpi0-slot0: AC12 err: 0x8000 | Host ctl2:0x008b > sdhci_acpi0-slot0: Caps: 0x446cc8b2 | Caps2:0x0807 > sdhci_acpi0-slot0: Max curr: 0x | ADMA err: 0x > sdhci_acpi0-slot0: ADMA addr:0x | Slot int: 0x > sdhci_acpi0-slot0: === > mmcsd0: Error indicated: 1 Timeout > : > (snip) > : > Stopped at kdb_enter+0x3b: movq$0,kdb_why > db> > > Detail log has put in [1]. BTW I used [2] so all stuffs are > within it and it should not be fetched to internet. > > Is there any idea to go forth? > > Best regards. > > [1] http://35.200.82.201/~kiri/freebsd/sg116j/crash_in_install.jpeg > [2] FreeBSD-12.0-CURRENT-amd64-20180110-r327788-memstick.img I've got r328126 memstic and install with it, then all went to perfect! Thanx for FreeBSD-CURRENT team! --- KIRIYAMA Kazuhiko > > --- > KIRIYAMA Kazuhiko > ___ freebsd-current@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
Re: SG116j install crashed
At Thu, 18 Jan 2018 15:35:41 +0900, my wrote: > > Hi, all > > I've bought Biccamera's original bland note PC (SG116j) > impulsively because of cheapness($1780). I've installed > 12.0-CURRENT(r327788) right away. Booted smoothly but set > loader conf "unset hint.uart.1.at" and configure disk with > > mmcsd058 GB GPT > mmcsd0p1200MB efi > mmcsd0p254 GB freebsd-ufs / > mmcsd0p34.2 GB freebsd-swapnone > > But in "Tetching distribution files" of base.txz, crashed > with: > > sdhci_acpi0-slot0: Controller timeout > sdhci_acpi0-slot0: == REGISTER DUMP == > sdhci_acpi0-slot0: Sys addr: 0x02158000 | Version: 0x1002 > sdhci_acpi0-slot0: Blk size: 0x0200 | Blk cnt: 0x00f8 > sdhci_acpi0-slot0: Argument: 0x017f57e8 | Trn mode: 0x0027 > sdhci_acpi0-slot0: Present: 0x1fff0106 | Host ctl: 0x1025 > sdhci_acpi0-slot0: Power:0x000b | Blk gap: 0x0080 > sdhci_acpi0-slot0: Wake-up: 0x | Clock:0x0007 > sdhci_acpi0-slot0: Timeout: 0x0007 | Int stat: 0x0001 > sdhci_acpi0-slot0: Int enab: 0x05ff0033 | Sig enab: 0x05ff003a > sdhci_acpi0-slot0: AC12 err: 0x8000 | Host ctl2:0x008b > sdhci_acpi0-slot0: Caps: 0x446cc8b2 | Caps2:0x0807 > sdhci_acpi0-slot0: Max curr: 0x | ADMA err: 0x > sdhci_acpi0-slot0: ADMA addr:0x | Slot int: 0x > sdhci_acpi0-slot0: === > mmcsd0: Error indicated: 1 Timeout > : > (snip) > : > Stopped at kdb_enter+0x3b: movq$0,kdb_why > db> > > Detail log has put in [1]. BTW I used [2] so all stuffs are > within it and it should not be fetched to internet. > > Is there any idea to go forth? I've tried to re-install by newfs /dev/mmcsd0p2 as follows: # newfs -E -U -j /dev/mmcsd0p2 and mount /dev/mmcsd0p2 to / then "commit" so installation go a litte forth at "Archive extract" section. But in extracting base.txz crashed: : g_vfs_done():mmcsd0p2[WRITE(offset=2299856,length=11776)]error = 5 panic: brelse: inapprppriate B_PAGING or B_CLUSTER bp 0xfe00011d5fc0 : (snip) : KDB: enter: panic [ thread pid 13 tid 100030 ] Stopped at kbd_enter+0x3b: moveq$0,kbd_why db> # Full log image put on [1] # [1] http://35.200.82.201/~kiri/freebsd/sg116j/crash_in_install-2.jpeg > > Best regards. > > [1] http://35.200.82.201/~kiri/freebsd/sg116j/crash_in_install.jpeg > [2] FreeBSD-12.0-CURRENT-amd64-20180110-r327788-memstick.img > > --- > KIRIYAMA Kazuhiko > ___ > freebsd-current@freebsd.org mailing list > https://lists.freebsd.org/mailman/listinfo/freebsd-current > To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org" > --- KIRIYAMA Kazuhiko ___ freebsd-current@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"
Re: SG116j install crashed
At Thu, 18 Jan 2018 15:35:41 +0900, 私 wrote: > > Hi, all > > I've bought Biccamera's original bland note PC (SG116j) > impulsively because of cheapness($1780). I've installed > 12.0-CURRENT(r327788) right away. Booted smoothly but set > loader conf "unset hint.uart.1.at" and configure disk with > > mmcsd058 GB GPT > mmcsd0p1200MB efi > mmcsd0p254 GB freebsd-ufs / > mmcsd0p34.2 GB freebsd-swapnone > > But in "Tetching distribution files" of base.txz, crashed > with: > > sdhci_acpi0-slot0: Controller timeout > sdhci_acpi0-slot0: == REGISTER DUMP == > sdhci_acpi0-slot0: Sys addr: 0x02158000 | Version: 0x1002 > sdhci_acpi0-slot0: Blk size: 0x0200 | Blk cnt: 0x00f8 > sdhci_acpi0-slot0: Argument: 0x017f57e8 | Trn mode: 0x0027 > sdhci_acpi0-slot0: Present: 0x1fff0106 | Host ctl: 0x1025 > sdhci_acpi0-slot0: Power:0x000b | Blk gap: 0x0080 > sdhci_acpi0-slot0: Wake-up: 0x | Clock:0x0007 > sdhci_acpi0-slot0: Timeout: 0x0007 | Int stat: 0x0001 > sdhci_acpi0-slot0: Int enab: 0x05ff0033 | Sig enab: 0x05ff003a > sdhci_acpi0-slot0: AC12 err: 0x8000 | Host ctl2:0x008b > sdhci_acpi0-slot0: Caps: 0x446cc8b2 | Caps2:0x0807 > sdhci_acpi0-slot0: Max curr: 0x | ADMA err: 0x > sdhci_acpi0-slot0: ADMA addr:0x | Slot int: 0x > sdhci_acpi0-slot0: === > mmcsd0: Error indicated: 1 Timeout > : > (snip) > : > Stopped at kdb_enter+0x3b: movq$0,kdb_why > db> Controller timeout seems to be somtimes occured in latest eMMC devices. demsg shows this machine's eMMC is Intel Bay Trail/Braswell eMMC 4.5/4.5.1 Controller as bellow: acpi_button0: on acpi0 acpi_lid0: on acpi0 acpi_acad0: on acpi0 acpi_tz0: on acpi0 sdhci_acpi0: iomem 0x9183a000-0x9183afff irq 45 on acpi0 mmc0: on sdhci_acpi0 sdhci_acpi1: iomem 0x91836000-0x91836fff irq 47 on acpi0 mmc1: on sdhci_acpi1 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0 Is Intel Bay Trail/Braswell eMMC 4.5/4.5.1 Controller currently works on FreeBSD 12.0-CURRENT? # Full dmesg up to [1] # [1] http://35.200.82.201/~kiri/freebsd/sg116j/dmesg.boot > > Detail log has put in [1]. BTW I used [2] so all stuffs are > within it and it should not be fetched to internet. > > Is there any idea to go forth? > > Best regards. > > [1] http://35.200.82.201/~kiri/freebsd/sg116j/crash_in_install.jpeg > [2] FreeBSD-12.0-CURRENT-amd64-20180110-r327788-memstick.img > > --- > KIRIYAMA Kazuhiko > --- KIRIYAMA Kazuhiko ___ freebsd-current@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-current To unsubscribe, send any mail to "freebsd-current-unsubscr...@freebsd.org"