[Dell XPS B800 w/ 3c905C-TX and Aureal Vortex 8830 soundcard]


I tried to upgrade my -current today. It had been running a -current
from Aug 14. However, neither my NIC (xl0) nor my soundcard (pcm0)
were detected on boot. All the relevant drivers are compiled into the
kernel, but the PCI code seems not to be able to find the devices at
all. 

[Note that for my soundcard I use the linux driver cores detailed at:
   http://www.cis.ohio-state.edu/~matey/au88x0/ ]

I have the verbose outputs of several different kernels:

kernel from 08/14 which detects both xl0 and pcm0

Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Mon Aug 14 15:05:20 EDT 2000
    vshah@jabberwock:/home/FreeBSD/src/sys/compile/VORPAL
Calibrating clock(s) ... TSC clock: 797902316 Hz, i8254 clock: 1193090 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254"  frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC"  frequency 797966565 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (797.97-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
  
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM>
real memory  = 402391040 (392960K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x003de000 - 0x17fb7fff, 398303232 bytes (97242 pages)
avail memory = 387481600 (378400K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fda60
bios32: Entry = 0xfda74 (c00fda74)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xda95
pnpbios: Found PnP BIOS data at 0xc00f2c10
pnpbios: Entry = f0000:24ca  Rev = 1.0
Other BIOS signatures found:
ACPI: 000ff980
Preloaded elf kernel "kernel.old" at 0xc03c5000.
nulldev: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
Creating DISK md0
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
found-> vendor=0x8086, dev=0x2501, revid=0x04
        class=06-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        map[10]: type 3, range 32, base f8000000, size 26, enabled
found-> vendor=0x8086, dev=0x250f, revid=0x04
        class=06-04-00, hdrtype=0x01, mfdev=0
        subordinatebus=1        secondarybus=1
found-> vendor=0x8086, dev=0x2418, revid=0x02
        class=06-04-00, hdrtype=0x01, mfdev=0
        subordinatebus=2        secondarybus=2
found-> vendor=0x8086, dev=0x2410, revid=0x02
        class=06-01-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
found-> vendor=0x8086, dev=0x2411, revid=0x02
        class=01-01-80, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        map[20]: type 4, range 32, base 0000ffa0, size  4, enabled
found-> vendor=0x8086, dev=0x2412, revid=0x02
        class=0c-03-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=d, irq=10
        map[20]: type 4, range 32, base 0000ef80, size  5, enabled
found-> vendor=0x8086, dev=0x2413, revid=0x02
        class=0c-05-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=b, irq=9
        map[20]: type 4, range 32, base 0000efa0, size  4, enabled
pci0: <PCI bus> on pcib0
pci0: <Host to PCI bridge (vendor=8086 device=2501)> (vendor=0x8086, dev=0x2501) at 0.0
pcib1: <PCI to PCI bridge (vendor=8086 device=250f)> at device 1.0 on pci0
found-> vendor=0x10de, dev=0x0100, revid=0x10
        class=03-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=a, irq=11
        map[10]: type 1, range 32, base fd000000, size 24, enabled
        map[14]: type 3, range 32, base e8000000, size 27, enabled
pci1: <PCI bus> on pcib1
pci1: <NVidia GeForce 256 graphics accelerator> (vendor=0x10de, dev=0x0100) at 0.0 irq 
11
pcib2: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0
found-> vendor=0x10b7, dev=0x9200, revid=0x78
        class=02-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=a, irq=11
        map[10]: type 4, range 32, base 0000dc00, size  7, enabled
        map[14]: type 1, range 32, base feaffc00, size  7, enabled
found-> vendor=0x12eb, dev=0x0002, revid=0xfe
        class=04-01-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=a, irq=10
        map[10]: type 1, range 32, base fea80000, size 18, enabled
        map[14]: type 4, range 32, base 0000dff0, size  3, enabled
        map[18]: type 4, range 32, base 0000dfe0, size  3, enabled
pci2: <PCI bus> on pcib2
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0xdc00-0xdc7f mem 0xfeaffc00-0xfeaffc7f 
irq 11 at device 8.0 on pci2
xl0: Ethernet address: 00:01:03:1d:d6:4e
xl0: media options word: a
xl0: found MII/AUTO
miibus0: <MII bus> on xl0
xlphy0: <3c905C 10/100 internal PHY> on miibus0
xlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
bpf: xl0 attached
pcm0: <Aureal Vortex 8830> port 0xdfe0-0xdfe7,0xdff0-0xdff7 mem 0xfea80000-0xfeabffff 
irq 10 at device 11.0 on pci2
pcm: setmap 2c000, 8000; 0xcfbae000 -> 2c000
pcm: setmap 34000, 8000; 0xcfbb6000 -> 34000
pcm: setmap 3c000, 8000; 0xcfbbe000 -> 3c000
pcm: setmap 44000, 8000; 0xcfbc6000 -> 44000
pcm: setmap 4c000, 8000; 0xcfbce000 -> 4c000
isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH ATA66 controller> port 0xffa0-0xffaf at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0
ata0: mask=03 status0=50 status1=00
ata0: mask=03 status0=50 status1=00
ata0: devices = 0x1
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xffa8
ata1: mask=03 status0=50 status1=00
ata1: mask=03 status0=00 status1=00
ata1: devices = 0x4
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801AA (ICH) USB controller> port 0xef80-0xef9f irq 10 at device 31.2 
on pci0
        using shared irq10.
usb0: <Intel 82801AA (ICH) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 9
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 20 devices, largest 234 bytes
PNP0c01: adding fixed memory32 range 0-0x9fbff, size=0x9fc00
PNP0c01: adding fixed memory32 range 0x9fc00-0x9ffff, size=0x400
PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=0x20000
PNP0c01: adding fixed memory32 range 0x17fe0000-0x17ff7fff, size=0x18000
PNP0c01: adding fixed memory32 range 0x17ff8000-0x17ffffff, size=0x8000
PNP0c01: adding fixed memory32 range 0x17fc0000-0x17fdffff, size=0x20000
PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000
PNP0c01: end config
pnpbios: handle 0 device ID PNP0c01 (010cd041)
PNP0c01: adding fixed memory32 range 0x100000-0x17fbffff, size=0x17ec0000
PNP0c01: end config
pnpbios: handle 1 device ID PNP0c01 (010cd041)
PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1
PNP0000: adding irq mask 0x4
PNP0000: end config
pnpbios: handle 2 device ID PNP0000 (0000d041)
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x80-0x90, size=0x11, align=0x1
PNP0200: adding io range 0x94-0x9f, size=0xc, align=0x1
PNP0200: adding io range 0xc0-0xde, size=0x1f, align=0x1
PNP0200: end config
pnpbios: handle 3 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: end config
pnpbios: handle 4 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: end config
pnpbios: handle 5 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: end config
pnpbios: handle 6 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
PNP0800: end config
pnpbios: handle 7 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: end config
pnpbios: handle 8 device ID PNP0c04 (040cd041)
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1
PNP0c02: adding io range 0x10-0x1f, size=0x10, align=0x1
PNP0c02: adding io range 0x22-0x2d, size=0xc, align=0x1
PNP0c02: adding io range 0x30-0x3f, size=0x10, align=0x1
PNP0c02: adding io range 0x50-0x52, size=0x3, align=0x1
PNP0c02: adding io range 0x72-0x77, size=0x6, align=0x1
PNP0c02: adding io range 0x91-0x93, size=0x3, align=0x1
PNP0c02: adding io range 0xa2-0xbe, size=0x1d, align=0x1
PNP0c02: adding io range 0x400-0x47f, size=0x80, align=0x1
PNP0c02: adding io range 0x540-0x54f, size=0x10, align=0x1
PNP0c02: adding io range 0x500-0x53f, size=0x40, align=0x1
PNP0c02: adding io range 0-0xffffffff, size=0, align=0x1
PNP0c02: adding io range 0-0xffffffff, size=0, align=0x1
PNP0c02: adding io range 0-0xffffffff, size=0, align=0x1
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: end config
pnpbios: handle 9 device ID PNP0c02 (020cd041)
INT0800: adding fixed memory32 range 0xffb00000-0xffbfffff, size=0x100000
INT0800: end config
pnpbios: handle 10 device ID INT0800 (0008d425)
PNP0c02: adding io range 0x800-0x87f, size=0x80, align=0x1
PNP0c02: end config
pnpbios: handle 11 device ID PNP0c02 (020cd041)
PNP0c02: end config
pnpbios: handle 12 device ID PNP0c02 (020cd041)
PNP0c02: end config
pnpbios: handle 13 device ID PNP0c02 (020cd041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x10
PNP0501: end config
pnpbios: handle 14 device ID PNP0501 (0105d041)
PNP0c02: end config
pnpbios: handle 15 device ID PNP0c02 (020cd041)
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0x8
PNP0401: adding io range 0x778-0x77a, size=0x3, align=0x8
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x8
PNP0401: end config
pnpbios: handle 16 device ID PNP0401 (0104d041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x1
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
PNP0700: end config
pnpbios: handle 17 device ID PNP0700 (0007d041)
PNP0f13: adding irq mask 0x1000
PNP0f13: end config
pnpbios: handle 18 device ID PNP0f13 (130fd041)
PNP0a03: end config
pnpbios: handle 19 device ID PNP0a03 (030ad041)
sc-: sc0 exists, using next available unit number
vga-: vga0 exists, using next available unit number
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 0a 03 c8
psm: status 0a 03 c8
psm: status 0a 03 c8
psm: data c8 c2 50
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0-50, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:08, syncbits:08
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 07 80 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic0 failed to probe on isa0
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x41 0x41 0x41 0x41
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sc1: no video adapter is found.
sc1: <System console> failed to probe on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
unknown: <PNP0303> can't assign resources
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <INT0800> failed to probe at iomem 0xffb00000-0xffbfffff on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0401> can't assign resources
unknown: <PNP0401> at port 0x378-0x37f on isa0
unknown: <PNP0700> can't assign resources
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
unknown: <PNP0f13> can't assign resources
unknown: <PNP0f13> at irq 12 on isa0
BIOS Geometries:
 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: ppp0 attached
new masks: bio 68c440, tty 631492, net 671c92
bpf: faith0 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
ata0-master: success setting up UDMA4 mode on ICH chip
ad0: <QUANTUM FIREBALLP LM30.0/A35.0700> ATA-5 disk at ata0 as master
ad0: 28629MB (58633344 sectors), 58168 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA66
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
Creating DISK ad0
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting up PIO4 mode on generic chip
acd0: <CRD-8482B/1.05> CDROM drive at ata1 as master
acd0: read 8250KB/s (8250KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM 120mm audio disc loaded, unlocked, lock protected
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 58621184, size 58621122 : OK
start_init: trying /sbin/init
pid 254 (ldconfig), uid 0: exited on signal 11 (core dumped)


kernel from 09/02 which detects neither

Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Sat Sep  2 13:40:56 EDT 2000
    root@jabberwock:/home/FreeBSD/src/sys/compile/VORPAL
Calibrating clock(s) ... TSC clock: 797903007 Hz, i8254 clock: 1193092 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254"  frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC"  frequency 797965923 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (797.97-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
  
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM>
real memory  = 402391040 (392960K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x003e1000 - 0x17fb7fff, 398290944 bytes (97239 pages)
avail memory = 387473408 (378392K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fda60
bios32: Entry = 0xfda74 (c00fda74)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xda95
pnpbios: Found PnP BIOS data at 0xc00f2c10
pnpbios: Entry = f0000:24ca  Rev = 1.0
Other BIOS signatures found:
Preloaded elf kernel "kernel" at 0xc03c8000.
nulldev: <null device, zero device>
random: <entropy source>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
Creating DISK md0
md0: Malloc disk
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: physical bus=0
found-> vendor=0x8086, dev=0x2501, revid=0x04
        class=06-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        map[10]: type 3, range 32, base f8000000, size 26, enabled
found-> vendor=0x8086, dev=0x250f, revid=0x04
        class=06-04-00, hdrtype=0x01, mfdev=0
        subordinatebus=1        secondarybus=1
found-> vendor=0x8086, dev=0x2418, revid=0x02
        class=06-04-00, hdrtype=0x01, mfdev=0
        subordinatebus=2        secondarybus=2
found-> vendor=0x8086, dev=0x2410, revid=0x02
        class=06-01-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
found-> vendor=0x8086, dev=0x2411, revid=0x02
        class=01-01-80, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        map[20]: type 4, range 32, base 0000ffa0, size  4, enabled
found-> vendor=0x8086, dev=0x2412, revid=0x02
        class=0c-03-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=d, irq=10
        map[20]: type 4, range 32, base 0000ef80, size  5, enabled
found-> vendor=0x8086, dev=0x2413, revid=0x02
        class=0c-05-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=b, irq=9
        map[20]: type 4, range 32, base 0000efa0, size  4, enabled
pci0: <PCI bus> on pcib0
pci0: <Host to PCI bridge (vendor=8086 device=2501)> (vendor=0x8086, dev=0x2501) at 0.0
pcib1: <PCI to PCI bridge (vendor=8086 device=250f)> at device 1.0 on pci0
pci1: physical bus=-1051344768
pci1: <PCI bus> on pcib1
pcib2: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0
pci2: physical bus=-1051332736
pci2: <PCI bus> on pcib2
isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH ATA66 controller> port 0xffa0-0xffaf at device 31.1 on pci0
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0
ata0: mask=03 status0=50 status1=00
ata0: mask=03 status0=50 status1=00
ata0: devices = 0x1
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xffa8
ata1: mask=03 status0=50 status1=00
ata1: mask=03 status0=00 status1=00
ata1: devices = 0x4
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801AA (ICH) USB controller> port 0xef80-0xef9f irq 10 at device 31.2 
on pci0
usb0: <Intel 82801AA (ICH) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci0: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 9
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
pnpbios: 20 devices, largest 234 bytes
PNP0c01: adding fixed memory32 range 0-0x9fbff, size=0x9fc00
PNP0c01: adding fixed memory32 range 0x9fc00-0x9ffff, size=0x400
PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=0x20000
PNP0c01: adding fixed memory32 range 0x17fe0000-0x17ff7fff, size=0x18000
PNP0c01: adding fixed memory32 range 0x17ff8000-0x17ffffff, size=0x8000
PNP0c01: adding fixed memory32 range 0x17fc0000-0x17fdffff, size=0x20000
PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000
PNP0c01: end config
pnpbios: handle 0 device ID PNP0c01 (010cd041)
PNP0c01: adding fixed memory32 range 0x100000-0x17fbffff, size=0x17ec0000
PNP0c01: end config
pnpbios: handle 1 device ID PNP0c01 (010cd041)
PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1
PNP0000: adding irq mask 0x4
PNP0000: end config
pnpbios: handle 2 device ID PNP0000 (0000d041)
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x80-0x90, size=0x11, align=0x1
PNP0200: adding io range 0x94-0x9f, size=0xc, align=0x1
PNP0200: adding io range 0xc0-0xde, size=0x1f, align=0x1
PNP0200: end config
pnpbios: handle 3 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: end config
pnpbios: handle 4 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: end config
pnpbios: handle 5 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: end config
pnpbios: handle 6 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
PNP0800: end config
pnpbios: handle 7 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: end config
pnpbios: handle 8 device ID PNP0c04 (040cd041)
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1
PNP0c02: adding io range 0x10-0x1f, size=0x10, align=0x1
PNP0c02: adding io range 0x22-0x2d, size=0xc, align=0x1
PNP0c02: adding io range 0x30-0x3f, size=0x10, align=0x1
PNP0c02: adding io range 0x50-0x52, size=0x3, align=0x1
PNP0c02: adding io range 0x72-0x77, size=0x6, align=0x1
PNP0c02: adding io range 0x91-0x93, size=0x3, align=0x1
PNP0c02: adding io range 0xa2-0xbe, size=0x1d, align=0x1
PNP0c02: adding io range 0x400-0x47f, size=0x80, align=0x1
PNP0c02: adding io range 0x540-0x54f, size=0x10, align=0x1
PNP0c02: adding io range 0x500-0x53f, size=0x40, align=0x1
PNP0c02: adding io range 0-0xffffffff, size=0, align=0x1
PNP0c02: adding io range 0-0xffffffff, size=0, align=0x1
PNP0c02: adding io range 0-0xffffffff, size=0, align=0x1
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: end config
pnpbios: handle 9 device ID PNP0c02 (020cd041)
INT0800: adding fixed memory32 range 0xffb00000-0xffbfffff, size=0x100000
INT0800: end config
pnpbios: handle 10 device ID INT0800 (0008d425)
PNP0c02: adding io range 0x800-0x87f, size=0x80, align=0x1
PNP0c02: end config
pnpbios: handle 11 device ID PNP0c02 (020cd041)
PNP0c02: end config
pnpbios: handle 12 device ID PNP0c02 (020cd041)
PNP0c02: end config
pnpbios: handle 13 device ID PNP0c02 (020cd041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x10
PNP0501: end config
pnpbios: handle 14 device ID PNP0501 (0105d041)
PNP0c02: end config
pnpbios: handle 15 device ID PNP0c02 (020cd041)
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0x8
PNP0401: adding io range 0x778-0x77a, size=0x3, align=0x8
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x8
PNP0401: end config
pnpbios: handle 16 device ID PNP0401 (0104d041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x1
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
PNP0700: end config
pnpbios: handle 17 device ID PNP0700 (0007d041)
PNP0f13: adding irq mask 0x1000
PNP0f13: end config
pnpbios: handle 18 device ID PNP0f13 (130fd041)
PNP0a03: end config
pnpbios: handle 19 device ID PNP0a03 (030ad041)
sc-: sc0 exists, using next available unit number
vga-: vga0 exists, using next available unit number
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
ata2 failed to probe at port 0x1f0 irq 14 on isa0
ata3 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 0a 03 c8
psm: status 0a 03 c8
psm: status 0a 03 c8
psm: data c8 c2 50
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0-50, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:08, syncbits:08
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 06 e0 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
pcic0 failed to probe on isa0
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x41 0x41 0x41 0x41
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sc1: no video adapter is found.
sc1: <System console> failed to probe on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
unknown: <PNP0303> can't assign resources
unknown: <PNP0303> at port 0x60 on isa0
unknown: <PNP0800> failed to probe at port 0x61 on isa0
unknown: <INT0800> failed to probe at iomem 0xffb00000-0xffbfffff on isa0
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0401> can't assign resources
unknown: <PNP0401> at port 0x378-0x37f on isa0
unknown: <PNP0700> can't assign resources
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
unknown: <PNP0f13> can't assign resources
unknown: <PNP0f13> at irq 12 on isa0
BIOS Geometries:
 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
bpf: lo0 attached
bpf: ppp0 attached
new masks: bio 68c440, tty 631092, net 671092
bpf: faith0 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
ata0-master: success setting UDMA4 on ICH chip
ad0: <QUANTUM FIREBALLP LM30.0/A35.0700> ATA-5 disk at ata0 as master
ad0: 28629MB (58633344 sectors), 58168 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA66
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
Creating DISK ad0
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <CRD-8482B/1.05> CDROM drive at ata1 as master
acd0: read 8250KB/s (8250KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM 120mm audio disc loaded, unlocked, lock protected
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 58621184, size 58621122 : OK
start_init: trying /sbin/init
pid 253 (ldconfig), uid 0: exited on signal 11 (core dumped)



GENERIC kernel ( with 'device pcm' added) from 09/02 which detects
neither

Copyright (c) 1992-2000 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD 5.0-CURRENT #0: Sat Sep  2 13:17:19 EDT 2000
    vshah@jabberwock:/home/FreeBSD/src/sys/compile/TEST
Calibrating clock(s) ... TSC clock: 797903648 Hz, i8254 clock: 1193092 Hz
CLK_USE_I8254_CALIBRATION not specified - using default frequency
Timecounter "i8254"  frequency 1193182 Hz
CLK_USE_TSC_CALIBRATION not specified - using old calibration method
Timecounter "TSC"  frequency 797965852 Hz
CPU: Pentium III/Pentium III Xeon/Celeron (797.97-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x683  Stepping = 3
  
Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,XMM>
real memory  = 402391040 (392960K bytes)
Physical memory chunk(s):
0x00001000 - 0x0009efff, 647168 bytes (158 pages)
0x004e7000 - 0x17fb7fff, 397217792 bytes (96977 pages)
avail memory = 386572288 (377512K bytes)
bios32: Found BIOS32 Service Directory header at 0xc00fda60
bios32: Entry = 0xfda74 (c00fda74)  Rev = 0  Len = 1
pcibios: PCI BIOS entry at 0xf0000+0xda95
pnpbios: Found PnP BIOS data at 0xc00f2c10
pnpbios: Entry = f0000:24ca  Rev = 1.0
Other BIOS signatures found:
Preloaded elf kernel "kernel" at 0xc04ce000.
random: <entropy source>
nulldev: <null device, zero device>
mem: <memory & I/O>
Pentium Pro MTRR support enabled
Creating DISK md0
md0: Malloc disk
Math emulator present
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: physical bus=0
found-> vendor=0x8086, dev=0x2501, revid=0x04
        class=06-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        map[10]: type 3, range 32, base f8000000, size 26, enabled
found-> vendor=0x8086, dev=0x250f, revid=0x04
        class=06-04-00, hdrtype=0x01, mfdev=0
        subordinatebus=1        secondarybus=1
found-> vendor=0x8086, dev=0x2418, revid=0x02
        class=06-04-00, hdrtype=0x01, mfdev=0
        subordinatebus=2        secondarybus=2
found-> vendor=0x8086, dev=0x2410, revid=0x02
        class=06-01-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
found-> vendor=0x8086, dev=0x2411, revid=0x02
        class=01-01-80, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        map[20]: type 4, range 32, base 0000ffa0, size  4, enabled
found-> vendor=0x8086, dev=0x2412, revid=0x02
        class=0c-03-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=d, irq=10
        map[20]: type 4, range 32, base 0000ef80, size  5, enabled
found-> vendor=0x8086, dev=0x2413, revid=0x02
        class=0c-05-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=b, irq=9
        map[20]: type 4, range 32, base 0000efa0, size  4, enabled
pci0: <PCI bus> on pcib0
pci0: <Host to PCI bridge (vendor=8086 device=2501)> (vendor=0x8086, dev=0x2501) at 0.0
pcib1: <PCI to PCI bridge (vendor=8086 device=250f)> at device 1.0 on pci0
pci1: physical bus=-1051517184
found-> vendor=0x8086, dev=0x2501, revid=0x04
        class=06-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        map[10]: type 3, range 32, base f8000000, size 26, enabled
found-> vendor=0x8086, dev=0x250f, revid=0x04
        class=06-04-00, hdrtype=0x01, mfdev=0
        subordinatebus=1        secondarybus=1
found-> vendor=0x8086, dev=0x2418, revid=0x02
        class=06-04-00, hdrtype=0x01, mfdev=0
        subordinatebus=2        secondarybus=2
found-> vendor=0x8086, dev=0x2410, revid=0x02
        class=06-01-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
found-> vendor=0x8086, dev=0x2411, revid=0x02
        class=01-01-80, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        map[20]: type 4, range 32, base 0000ffa0, size  4, enabled
found-> vendor=0x8086, dev=0x2412, revid=0x02
        class=0c-03-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=d, irq=10
        map[20]: type 4, range 32, base 0000ef80, size  5, enabled
found-> vendor=0x8086, dev=0x2413, revid=0x02
        class=0c-05-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=b, irq=9
        map[20]: type 4, range 32, base 0000efa0, size  4, enabled
pci1: <PCI bus> on pcib1
pci1: <Host to PCI bridge (vendor=8086 device=2501)> (vendor=0x8086, dev=0x2501) at 0.0
pcib2: <PCI to PCI bridge (vendor=8086 device=250f)> at device 1.0 on pci1
pci2: physical bus=-1051519232
found-> vendor=0x8086, dev=0x2501, revid=0x04
        class=06-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        map[10]: type 3, range 32, base f8000000, size 26, enabled
found-> vendor=0x8086, dev=0x250f, revid=0x04
        class=06-04-00, hdrtype=0x01, mfdev=0
        subordinatebus=1        secondarybus=1
found-> vendor=0x8086, dev=0x2418, revid=0x02
        class=06-04-00, hdrtype=0x01, mfdev=0
        subordinatebus=2        secondarybus=2
found-> vendor=0x8086, dev=0x2410, revid=0x02
        class=06-01-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
found-> vendor=0x8086, dev=0x2411, revid=0x02
        class=01-01-80, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        map[20]: type 4, range 32, base 0000ffa0, size  4, enabled
found-> vendor=0x8086, dev=0x2412, revid=0x02
        class=0c-03-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=d, irq=10
        map[20]: type 4, range 32, base 0000ef80, size  5, enabled
found-> vendor=0x8086, dev=0x2413, revid=0x02
        class=0c-05-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=b, irq=9
        map[20]: type 4, range 32, base 0000efa0, size  4, enabled
pci2: <PCI bus> on pcib2
pci2: <Host to PCI bridge (vendor=8086 device=2501)> (vendor=0x8086, dev=0x2501) at 0.0
pcib3: <PCI to PCI bridge (vendor=8086 device=250f)> at device 1.0 on pci2
pci3: physical bus=-1051500672
pci3: <PCI bus> on pcib3
pcib4: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci2
pci4: physical bus=-1051500928
pci4: <PCI bus> on pcib4
isab0: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci2
isa0: <ISA bus> on isab0
atapci0: <Intel ICH ATA66 controller> port 0xffa0-0xffaf at device 31.1 on pci2
ata0: iobase=0x01f0 altiobase=0x03f6 bmaddr=0xffa0
ata0: mask=03 status0=50 status1=00
ata0: mask=03 status0=50 status1=00
ata0: devices = 0x1
ata0: at 0x1f0 irq 14 on atapci0
ata1: iobase=0x0170 altiobase=0x0376 bmaddr=0xffa8
ata1: mask=03 status0=50 status1=00
ata1: mask=03 status0=00 status1=00
ata1: devices = 0x4
ata1: at 0x170 irq 15 on atapci0
uhci0: <Intel 82801AA (ICH) USB controller> port 0xef80-0xef9f irq 10 at device 31.2 
on pci2
usb0: <Intel 82801AA (ICH) USB controller> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
pci2: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 9
pcib5: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci1
pci5: physical bus=-1051519488
found-> vendor=0x8086, dev=0x2501, revid=0x04
        class=06-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        map[10]: type 3, range 32, base f8000000, size 26, enabled
found-> vendor=0x8086, dev=0x250f, revid=0x04
        class=06-04-00, hdrtype=0x01, mfdev=0
        subordinatebus=1        secondarybus=1
found-> vendor=0x8086, dev=0x2418, revid=0x02
        class=06-04-00, hdrtype=0x01, mfdev=0
        subordinatebus=2        secondarybus=2
found-> vendor=0x8086, dev=0x2410, revid=0x02
        class=06-01-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
found-> vendor=0x8086, dev=0x2411, revid=0x02
        class=01-01-80, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        map[20]: type 4, range 32, base 0000ffa0, size  4, enabled
found-> vendor=0x8086, dev=0x2412, revid=0x02
        class=0c-03-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=d, irq=10
        map[20]: type 4, range 32, base 0000ef80, size  5, enabled
found-> vendor=0x8086, dev=0x2413, revid=0x02
        class=0c-05-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=b, irq=9
        map[20]: type 4, range 32, base 0000efa0, size  4, enabled
pci5: <PCI bus> on pcib5
pci5: <Host to PCI bridge (vendor=8086 device=2501)> (vendor=0x8086, dev=0x2501) at 0.0
pcib6: <PCI to PCI bridge (vendor=8086 device=250f)> at device 1.0 on pci5
pci6: physical bus=-1051472128
found-> vendor=0x8086, dev=0x2501, revid=0x04
        class=06-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        map[10]: type 3, range 32, base f8000000, size 26, enabled
found-> vendor=0x8086, dev=0x250f, revid=0x04
        class=06-04-00, hdrtype=0x01, mfdev=0
        subordinatebus=1        secondarybus=1
found-> vendor=0x8086, dev=0x2418, revid=0x02
        class=06-04-00, hdrtype=0x01, mfdev=0
        subordinatebus=2        secondarybus=2
found-> vendor=0x8086, dev=0x2410, revid=0x02
        class=06-01-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
found-> vendor=0x8086, dev=0x2411, revid=0x02
        class=01-01-80, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        map[20]: type 4, range 32, base 0000ffa0, size  4, enabled
found-> vendor=0x8086, dev=0x2412, revid=0x02
        class=0c-03-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=d, irq=10
        map[20]: type 4, range 32, base 0000ef80, size  5, enabled
found-> vendor=0x8086, dev=0x2413, revid=0x02
        class=0c-05-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=b, irq=9
        map[20]: type 4, range 32, base 0000efa0, size  4, enabled
pci6: <PCI bus> on pcib6
pci6: <Host to PCI bridge (vendor=8086 device=2501)> (vendor=0x8086, dev=0x2501) at 0.0
pcib7: <PCI to PCI bridge (vendor=8086 device=250f)> at device 1.0 on pci6
pci7: physical bus=-1051474048
pci7: <PCI bus> on pcib7
pcib8: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci6
pci8: physical bus=-1051474304
pci8: <PCI bus> on pcib8
isab1: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci6
atapci1: <Intel ICH ATA66 controller> port 0xffa0-0xffaf at device 31.1 on pci6
atapci1: Busmastering DMA not configured
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
ata2: probe allocation failed
ata3: probe allocation failed
uhci1: <Intel 82801AA (ICH) USB controller> port 0xef80-0xef9f irq 10 at device 31.2 
on pci6
uhci1: Could not map ports
device_probe_and_attach: uhci1 attach returned 6
pci6: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 9
pcib9: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci5
pci9: physical bus=-1051472384
found-> vendor=0x8086, dev=0x2501, revid=0x04
        class=06-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        map[10]: type 3, range 32, base f8000000, size 26, enabled
found-> vendor=0x8086, dev=0x250f, revid=0x04
        class=06-04-00, hdrtype=0x01, mfdev=0
        subordinatebus=1        secondarybus=1
found-> vendor=0x8086, dev=0x2418, revid=0x02
        class=06-04-00, hdrtype=0x01, mfdev=0
        subordinatebus=2        secondarybus=2
found-> vendor=0x8086, dev=0x2410, revid=0x02
        class=06-01-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
found-> vendor=0x8086, dev=0x2411, revid=0x02
        class=01-01-80, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        map[20]: type 4, range 32, base 0000ffa0, size  4, enabled
found-> vendor=0x8086, dev=0x2412, revid=0x02
        class=0c-03-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=d, irq=10
        map[20]: type 4, range 32, base 0000ef80, size  5, enabled
found-> vendor=0x8086, dev=0x2413, revid=0x02
        class=0c-05-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=b, irq=9
        map[20]: type 4, range 32, base 0000efa0, size  4, enabled
pci9: <PCI bus> on pcib9
pci9: <Host to PCI bridge (vendor=8086 device=2501)> (vendor=0x8086, dev=0x2501) at 0.0
pcib10: <PCI to PCI bridge (vendor=8086 device=250f)> at device 1.0 on pci9
pci10: physical bus=-1051464320
pci10: <PCI bus> on pcib10
pcib11: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci9
pci11: physical bus=-1051464576
pci11: <PCI bus> on pcib11
isab2: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci9
atapci2: <Intel ICH ATA66 controller> port 0xffa0-0xffaf at device 31.1 on pci9
atapci2: Busmastering DMA not configured
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
ata4: probe allocation failed
ata5: probe allocation failed
uhci2: <Intel 82801AA (ICH) USB controller> port 0xef80-0xef9f irq 10 at device 31.2 
on pci9
uhci2: Could not map ports
device_probe_and_attach: uhci2 attach returned 6
pci9: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 9
isab3: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci5
atapci3: <Intel ICH ATA66 controller> port 0xffa0-0xffaf at device 31.1 on pci5
atapci3: Busmastering DMA not configured
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
ata6: probe allocation failed
ata7: probe allocation failed
uhci3: <Intel 82801AA (ICH) USB controller> port 0xef80-0xef9f irq 10 at device 31.2 
on pci5
uhci3: Could not map ports
device_probe_and_attach: uhci3 attach returned 6
pci5: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 9
isab4: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci1
atapci4: <Intel ICH ATA66 controller> port 0xffa0-0xffaf at device 31.1 on pci1
atapci4: Busmastering DMA not configured
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
ata8: probe allocation failed
ata9: probe allocation failed
uhci4: <Intel 82801AA (ICH) USB controller> port 0xef80-0xef9f irq 10 at device 31.2 
on pci1
uhci4: Could not map ports
device_probe_and_attach: uhci4 attach returned 6
pci1: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 9
pcib12: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci0
pci12: physical bus=-1051517440
found-> vendor=0x8086, dev=0x2501, revid=0x04
        class=06-00-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        map[10]: type 3, range 32, base f8000000, size 26, enabled
found-> vendor=0x8086, dev=0x250f, revid=0x04
        class=06-04-00, hdrtype=0x01, mfdev=0
        subordinatebus=1        secondarybus=1
found-> vendor=0x8086, dev=0x2418, revid=0x02
        class=06-04-00, hdrtype=0x01, mfdev=0
        subordinatebus=2        secondarybus=2
found-> vendor=0x8086, dev=0x2410, revid=0x02
        class=06-01-00, hdrtype=0x00, mfdev=1
        subordinatebus=0        secondarybus=0
found-> vendor=0x8086, dev=0x2411, revid=0x02
        class=01-01-80, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        map[20]: type 4, range 32, base 0000ffa0, size  4, enabled
found-> vendor=0x8086, dev=0x2412, revid=0x02
        class=0c-03-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=d, irq=10
        map[20]: type 4, range 32, base 0000ef80, size  5, enabled
found-> vendor=0x8086, dev=0x2413, revid=0x02
        class=0c-05-00, hdrtype=0x00, mfdev=0
        subordinatebus=0        secondarybus=0
        intpin=b, irq=9
        map[20]: type 4, range 32, base 0000efa0, size  4, enabled
pci12: <PCI bus> on pcib12
pci12: <Host to PCI bridge (vendor=8086 device=2501)> (vendor=0x8086, dev=0x2501) at 
0.0
pcib13: <PCI to PCI bridge (vendor=8086 device=250f)> at device 1.0 on pci12
pci13: physical bus=-1051467648
pci13: <PCI bus> on pcib13
pcib14: <Intel 82801AA (ICH) Hub to PCI bridge> at device 30.0 on pci12
pci14: physical bus=-1051455616
pci14: <PCI bus> on pcib14
isab5: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci12
atapci5: <Intel ICH ATA66 controller> port 0xffa0-0xffaf at device 31.1 on pci12
atapci5: Busmastering DMA not configured
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
ata10: probe allocation failed
ata11: probe allocation failed
uhci5: <Intel 82801AA (ICH) USB controller> port 0xef80-0xef9f irq 10 at device 31.2 
on pci12
uhci5: Could not map ports
device_probe_and_attach: uhci5 attach returned 6
pci12: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 9
isab6: <Intel 82801AA (ICH) PCI to LPC bridge> at device 31.0 on pci0
atapci6: <Intel ICH ATA66 controller> port 0xffa0-0xffaf at device 31.1 on pci0
atapci6: Busmastering DMA not configured
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
ata12: probe allocation failed
ata13: probe allocation failed
uhci6: <Intel 82801AA (ICH) USB controller> port 0xef80-0xef9f irq 10 at device 31.2 
on pci0
uhci6: Could not map ports
device_probe_and_attach: uhci6 attach returned 6
pci0: <unknown card> (vendor=0x8086, dev=0x2413) at 31.3 irq 9
ata-: ata0 exists, using next available unit number
ata-: ata1 exists, using next available unit number
Trying Read_Port at 203
Trying Read_Port at 243
Trying Read_Port at 283
Trying Read_Port at 2c3
Trying Read_Port at 303
Trying Read_Port at 343
Trying Read_Port at 383
Trying Read_Port at 3c3
ex_isa_identify()
pnpbios: 20 devices, largest 234 bytes
PNP0c01: adding fixed memory32 range 0-0x9fbff, size=0x9fc00
PNP0c01: adding fixed memory32 range 0x9fc00-0x9ffff, size=0x400
PNP0c01: adding fixed memory32 range 0xe0000-0xfffff, size=0x20000
PNP0c01: adding fixed memory32 range 0x17fe0000-0x17ff7fff, size=0x18000
PNP0c01: adding fixed memory32 range 0x17ff8000-0x17ffffff, size=0x8000
PNP0c01: adding fixed memory32 range 0x17fc0000-0x17fdffff, size=0x20000
PNP0c01: adding fixed memory32 range 0xfff00000-0xffffffff, size=0x100000
PNP0c01: end config
pnpbios: handle 0 device ID PNP0c01 (010cd041)
PNP0c01: adding fixed memory32 range 0x100000-0x17fbffff, size=0x17ec0000
PNP0c01: end config
pnpbios: handle 1 device ID PNP0c01 (010cd041)
PNP0000: adding io range 0x20-0x21, size=0x2, align=0x1
PNP0000: adding io range 0xa0-0xa1, size=0x2, align=0x1
PNP0000: adding irq mask 0x4
PNP0000: end config
pnpbios: handle 2 device ID PNP0000 (0000d041)
PNP0200: adding dma mask 0x10
PNP0200: adding io range 0-0xf, size=0x10, align=0x1
PNP0200: adding io range 0x80-0x90, size=0x11, align=0x1
PNP0200: adding io range 0x94-0x9f, size=0xc, align=0x1
PNP0200: adding io range 0xc0-0xde, size=0x1f, align=0x1
PNP0200: end config
pnpbios: handle 3 device ID PNP0200 (0002d041)
PNP0100: adding irq mask 0x1
PNP0100: adding io range 0x40-0x43, size=0x4, align=0x1
PNP0100: end config
pnpbios: handle 4 device ID PNP0100 (0001d041)
PNP0b00: adding irq mask 0x100
PNP0b00: adding io range 0x70-0x71, size=0x2, align=0x1
PNP0b00: end config
pnpbios: handle 5 device ID PNP0b00 (000bd041)
PNP0303: adding irq mask 0x2
PNP0303: adding io range 0x60-0x60, size=0x1, align=0x1
PNP0303: adding io range 0x64-0x64, size=0x1, align=0x1
PNP0303: end config
pnpbios: handle 6 device ID PNP0303 (0303d041)
PNP0800: adding io range 0x61-0x61, size=0x1, align=0x1
PNP0800: end config
pnpbios: handle 7 device ID PNP0800 (0008d041)
PNP0c04: adding irq mask 0x2000
PNP0c04: adding io range 0xf0-0xff, size=0x10, align=0x1
PNP0c04: end config
pnpbios: handle 8 device ID PNP0c04 (040cd041)
PNP0c02: adding io range 0x4d0-0x4d1, size=0x2, align=0x1
PNP0c02: adding io range 0xcf8-0xcff, size=0x8, align=0x1
PNP0c02: adding io range 0x10-0x1f, size=0x10, align=0x1
PNP0c02: adding io range 0x22-0x2d, size=0xc, align=0x1
PNP0c02: adding io range 0x30-0x3f, size=0x10, align=0x1
PNP0c02: adding io range 0x50-0x52, size=0x3, align=0x1
PNP0c02: adding io range 0x72-0x77, size=0x6, align=0x1
PNP0c02: adding io range 0x91-0x93, size=0x3, align=0x1
PNP0c02: adding io range 0xa2-0xbe, size=0x1d, align=0x1
PNP0c02: adding io range 0x400-0x47f, size=0x80, align=0x1
PNP0c02: adding io range 0x540-0x54f, size=0x10, align=0x1
PNP0c02: adding io range 0x500-0x53f, size=0x40, align=0x1
PNP0c02: adding io range 0-0xffffffff, size=0, align=0x1
PNP0c02: adding io range 0-0xffffffff, size=0, align=0x1
PNP0c02: adding io range 0-0xffffffff, size=0, align=0x1
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: skipping empty range
PNP0c02: end config
pnpbios: handle 9 device ID PNP0c02 (020cd041)
INT0800: adding fixed memory32 range 0xffb00000-0xffbfffff, size=0x100000
INT0800: end config
pnpbios: handle 10 device ID INT0800 (0008d425)
PNP0c02: adding io range 0x800-0x87f, size=0x80, align=0x1
PNP0c02: end config
pnpbios: handle 11 device ID PNP0c02 (020cd041)
PNP0c02: end config
pnpbios: handle 12 device ID PNP0c02 (020cd041)
PNP0c02: end config
pnpbios: handle 13 device ID PNP0c02 (020cd041)
PNP0501: adding io range 0x3f8-0x3ff, size=0x8, align=0x8
PNP0501: adding irq mask 0x10
PNP0501: end config
pnpbios: handle 14 device ID PNP0501 (0105d041)
PNP0c02: end config
pnpbios: handle 15 device ID PNP0c02 (020cd041)
PNP0401: adding io range 0x378-0x37f, size=0x8, align=0x8
PNP0401: adding io range 0x778-0x77a, size=0x3, align=0x8
PNP0401: adding irq mask 0x80
PNP0401: adding dma mask 0x8
PNP0401: end config
pnpbios: handle 16 device ID PNP0401 (0104d041)
PNP0700: adding io range 0x3f0-0x3f5, size=0x6, align=0x1
PNP0700: adding io range 0x3f7-0x3f7, size=0x1, align=0x1
PNP0700: adding irq mask 0x40
PNP0700: adding dma mask 0x4
PNP0700: end config
pnpbios: handle 17 device ID PNP0700 (0007d041)
PNP0f13: adding irq mask 0x1000
PNP0f13: end config
pnpbios: handle 18 device ID PNP0f13 (130fd041)
PNP0a03: end config
pnpbios: handle 19 device ID PNP0a03 (030ad041)
sc-: sc0 exists, using next available unit number
vga-: vga0 exists, using next available unit number
isa_probe_children: disabling PnP devices
isa_probe_children: probing non-PnP devices
ata14 failed to probe at port 0x1f0 irq 14 on isa0
ata15 failed to probe at port 0x170 irq 15 on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
atkbd: the current kbd controller command byte 0065
atkbd: keyboard ID 0x41ab (2)
kbdc: RESET_KBD return code:00fa
kbdc: RESET_KBD status:00aa
kbd0 at atkbd0
kbd0: atkbd0, AT 101/102 (2), config:0x1, flags:0x3d0000
psm0: current command byte:0065
kbdc: TEST_AUX_PORT status:0000
kbdc: RESET_AUX return code:00fa
kbdc: RESET_AUX status:00aa
kbdc: RESET_AUX ID:0000
psm: status 00 02 64
psm: status 0a 03 c8
psm: status 0a 03 c8
psm: status 0a 03 c8
psm: data c8 c2 50
psm: data 08 00 00
psm: status 00 02 64
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model MouseMan+, device ID 0-50, 3 buttons
psm0: config:00000000, flags:00000000, packet size:3
psm0: syncmask:08, syncbits:08
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
pcic0 failed to probe at port 0x3e0-0x3e1 on isa0
ppc0: parallel port found at 0x378
ppc0: using extended I/O port range
ppc0: ECP SPP ECP+EPP SPP
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/8 bytes threshold
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
bpf: lp0 attached
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sc0: fb0, kbd0, terminal emulator: sc (syscons terminal)
sio0: irq maps: 0x41 0x51 0x41 0x41
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: irq maps: 0x41 0x41 0x41 0x41
sio1: probe failed test(s): 0 1 2 4 6 7 9
sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0
sio2: not probed (disabled)
sio3: not probed (disabled)
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
fb0: vga0, vga, type:VGA (5), flags:0x7007f
fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa0000 0x20000
fb0: init mode:24, bios mode:3, current mode:24
fb0: window:0xc00b8000 size:32k gran:32k, buf:0 size:32k
VGA parameters upon power-up
50 18 10 00 00 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 06 e0 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
VGA parameters in BIOS for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
EGA/VGA parameters to be used for mode 24
50 18 10 00 10 00 03 00 02 67 5f 4f 50 82 55 81 
bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 
b9 a3 ff 00 01 02 03 04 05 14 07 38 39 3a 3b 3c 
3d 3e 3f 0c 00 0f 08 00 00 00 00 00 10 0e 00 ff 
sc1: no video adapter is found.
sc1: <System console> failed to probe on isa0
vga1: <Generic ISA VGA> failed to probe on isa0
isa_probe_children: probing PnP devices
adv0: Invalid baseport of 0x20 specified. Nearest valid baseport is 0x100.  Failing 
probe.
adv0: Invalid baseport of 0x0 specified. Nearest valid baseport is 0x100.  Failing 
probe.
adv0: Invalid baseport of 0x40 specified. Nearest valid baseport is 0x100.  Failing 
probe.
adv0: Invalid baseport of 0x70 specified. Nearest valid baseport is 0x100.  Failing 
probe.
unknown: <PNP0303> can't assign resources
unknown: <PNP0303> at port 0x60 on isa0
adv0: Invalid baseport of 0x61 specified. Nearest valid baseport is 0x100.  Failing 
probe.
unknown: <PNP0800> failed to probe at port 0x61 on isa0
adv0: Invalid baseport of 0xf0 specified. Nearest valid baseport is 0x100.  Failing 
probe.
adv0: Invalid baseport of 0x4d0 specified. Nearest valid baseport is 0x330.  Failing 
probe.
unknown: <INT0800> failed to probe at port 0x330 iomem 0xffb00000-0xffbfffff on isa0
adv0: Invalid baseport of 0x800 specified. Nearest valid baseport is 0x330.  Failing 
probe.
unknown: <PNP0501> can't assign resources
unknown: <PNP0501> at port 0x3f8-0x3ff on isa0
unknown: <PNP0401> can't assign resources
unknown: <PNP0401> at port 0x378-0x37f on isa0
unknown: <PNP0700> can't assign resources
unknown: <PNP0700> at port 0x3f0-0x3f5 on isa0
unknown: <PNP0f13> can't assign resources
unknown: <PNP0f13> at irq 12 on isa0
BIOS Geometries:
 0:03fefe3f 0..1022=1023 cylinders, 0..254=255 heads, 1..63=63 sectors
 0 accounted for
Device configuration finished.
bpf: ppp0 attached
new masks: bio 68c440, tty 631092, net 671092
bpf: faith0 attached
bpf: gif0 attached
bpf: gif1 attached
bpf: gif2 attached
bpf: gif3 attached
bpf: lo0 attached
ata0-master: success setting UDMA4 on ICH chip
ad0: <QUANTUM FIREBALLP LM30.0/A35.0700> ATA-5 disk at ata0 as master
ad0: 28629MB (58633344 sectors), 58168 cyls, 16 heads, 63 S/T, 512 B/S
ad0: 16 secs/int, 1 depth queue, UDMA66
ad0: piomode=4 dmamode=2 udmamode=4 cblid=1
Creating DISK ad0
ata1-master: piomode=4 dmamode=2 udmamode=2 dmaflag=1
ata1-master: success setting PIO4 on generic chip
acd0: <CRD-8482B/1.05> CDROM drive at ata1 as master
acd0: read 8250KB/s (8250KB/s), 128KB buffer, PIO4
acd0: Reads: CD-R, CD-RW, CD-DA stream, packet
acd0: Audio: play, 255 volume levels
acd0: Mechanism: ejectable tray
acd0: Medium: CD-ROM 120mm audio disc loaded, unlocked, lock protected
Mounting root from ufs:/dev/ad0s1a
ad0s1: type 0xa5, start 63, end = 58621184, size 58621122 : OK
start_init: trying /sbin/init
pid 265 (ldconfig), uid 0: exited on signal 11 (core dumped)



Anyone have any suggestions?



Viren
-- 
"I sat around during the design phase going "this is going to suck so badly
 that we're going to have to hold onto desks to stop us from being drawn into
 the vortex"." -- Chris "Saundo" Saunderson in the scary devil monastery

Reply via email to