My floppy fails to probe for about last 2 weeks. It worked early with my current-box, and it works on windoze. dmesg of my mashine: Copyright (c) 1992-2001 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 5.0-CURRENT #1: Sun Sep 9 17:07:13 EEST 2001 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/CURRENT Timecounter "i8254" frequency 1193346 Hz CPU: Pentium II/Pentium II Xeon/Celeron (501.21-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x665 Stepping = 5 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 134152192 (131008K bytes) avail memory = 126377984 (123416K bytes) Preloaded elf kernel "kernel" at 0xc0408000. Preloaded elf module "snd_es137x.ko" at 0xc040809c. Preloaded elf module "snd_pcm.ko" at 0xc0408140. Pentium Pro MTRR support enabled VESA: v3.0, 4096k memory, flags:0x1, mode table:0xc036e402 (1000022) VESA: NVidia Using $PIR table, 7 entries at 0xc00fdf00 apm0: <APM BIOS> on motherboard apm0: found APM BIOS v1.2, connected at v1.2 acpi0: <soltek AWRDACPI> on motherboard acpi0: power button is handled as a fixed feature programming model. Timecounter "ACPI" frequency 3579545 Hz can't fetch resources for \\_SB_.PCI0.ISA_.FDC0 - AE_AML_UNINITIALIZED_LOCAL acpi_timer0: <24-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0 acpi_cpu0: <CPU> on acpi0 acpi_tz0: <thermal zone> on acpi0 acpi_button0: <Power Button> on acpi0 acpi_pcib0: <Host-PCI bridge> port 0x5000-0x500f,0x4000-0x4041,0xcf8-0xcff on acpi0 pci0: <PCI bus> on acpi_pcib0 pcib1: <PCI-PCI bridge> at device 1.0 on pci0 pci1: <PCI bus> on pcib1 pci1: <display, VGA> at device 0.0 (no driver attached) isab0: <PCI-ISA bridge> at device 7.0 on pci0 isa0: <ISA bus> on isab0 atapci0: <Intel PIIX4 ATA33 controller> port 0xf000-0xf00f at device 7.1 on pci0 ata0: at 0x1f0 irq 14 on atapci0 ata1: at 0x170 irq 15 on atapci0 uhci0: <Intel 82371AB/EB (PIIX4) USB controller> port 0xe000-0xe01f irq 10 at device 7.2 on pci0 usb0: <Intel 82371AB/EB (PIIX4) USB controller> on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered intpm0: <Intel 82371AB Power management controller> port 0x5000-0x500f irq 9 at device 7.3 on pci0 intpm0: I/O mapped 5000 intpm0: intr IRQ 9 enabled revision 0 smbus0: <System Management Bus> on intsmb0 smb0: <SMBus general purpose I/O> on smbus0 intpm0: PM I/O mapped 4000 pcm0: <AudioPCI ES1373-8> port 0xe400-0xe43f irq 9 at device 9.0 on pci0 rl0: <RealTek 8139 10/100BaseTX> port 0xe800-0xe8ff mem 0xd4800000-0xd48000ff irq 9 at device 10.0 on pci0 rl0: Realtek 8139B detected. Warning, this may be unstable in autoselect mode rl0: Ethernet address: 00:00:21:fa:e4:be miibus0: <MII bus> on rl0 rlphy0: <RealTek internal media interface> on miibus0 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto atspeaker0 port 0x61 on acpi0 fdc0: cannot reserve I/O port range (1 ports) sio0 port 0x3f8-0x3ff irq 4 on acpi0 sio0: type 16550A sio1 port 0x2f8-0x2ff irq 3 on acpi0 sio1: type 16550A atkbdc0: <Keyboard controller (i8042)> port 0x64,0x60 irq 1 on acpi0 atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 kbd0 at atkbd0 fdc0: cannot reserve I/O port range (1 ports) psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: model Generic PS/2 mouse, device ID 0 npx0: <math processor> on motherboard npx0: INT 16 interface orm0: <Option ROM> at iomem 0xc0000-0xcffff on isa0 fdc0: cannot reserve I/O port range (6 ports) pmtimer0 on isa0 sc0: <System console> at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 linprocfs registered acpi_cpu0: set speed to 100.0% acpi_cpu: CPU throttling enabled, 2 steps from 100% to 50.0% ad0: DMA limited to UDMA33, non-ATA66 compliant cable ad0: 9773MB <FUJITSU MPE3102AT> [19857/16/63] at ata0-master UDMA33 ad2: 26105MB <WDC WD273BA> [53040/16/63] at ata1-master UDMA33 acd0: CD-RW <YAMAHA CRW8424E> at ata0-slave PIO4 acd1: CDROM <CREATIVE CD5230E> at ata1-slave PIO4 Mounting root from ufs:/dev/ad0s3a To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-current" in the body of the message