Re: weird serial console issue
On Tue, Dec 10, 2002 at 11:41:35PM +0100, Wilko Bulte wrote: Well, I think my DS10 does not have that problem as in: ppi0: Parallel I/O on ppbus0 ppc0: interrupting at ISA irq 7 sc0: System console on isa0 sc0: VGA 16 virtual consoles, flags=0x0 sc0: fb0, kbd0, terminal emulator: sc (syscons terminal) sio0: irq maps: 0x81 0x91 0x81 0x81 sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A, console sio0: interrupting at ISA irq 4 sio1: reserved for low-level i/o sio1 failed to probe at port 0x2f8-0x2ff irq 3 flags 0x50 on isa0 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 fb0: vga0, vga, type:VGA (5), flags:0x7007f fb0: port:0x3c0-0x3df, crtc:0x3d4, mem:0xa 0x2 fb0: init mode:24, bios mode:3, current mode:24 fb0: window:0xb8000 size:32k gran:32k, buf:0 size:32k VGA parameters upon power-up 50 18 10 00 00 00 03 00 02 67 60 4f 50 83 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 04 02 14 01 05 03 07 38 3c 3a 3e 39 3d 3b 3f 04 00 0f 08 00 00 00 00 00 10 0e 00 ff VGA parameters in BIOS for mode 24 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 EGA/VGA parameters to be used for mode 24 50 18 10 00 00 00 03 00 02 67 60 4f 50 83 55 81 bf 1f 00 4f 0d 0e 00 00 00 00 9c 8e 8f 28 1f 96 b9 a3 ff 00 04 02 14 01 05 03 07 38 3c 3a 3e 39 3d 3b 3f 04 00 0f 08 00 00 00 00 00 10 0e 00 ff isa_probe_children: probing PnP devices procfs registered Timecounter i8254 frequency 1193182 Hz Timecounter alpha frequency 462387140 Hz Timecounters tick every 0.976 msec Taken from the serial console. Wilko On Tue, Dec 10, 2002 at 02:01:16PM -0500, Andrew Gallatin wrote: I will bring my DS10 to the latest greatest -current and see what it does for me. Stay tuned (till tomorrow at least ;) W/ I just upgraded my UP1000 from 4.7-stable to 5.0. Only weird thing left is the console seems to drop a lot of characters just after syscons takes over. I see this on console: ... ppc0: interrupting at ISA irq 7 sc0: System console on isa0 sc0: VGA 16 virtual consoles, flags=0x0 net.inet.udp.blackhole: 0 - 1 Doing initial network setup: host.conf hostname domain. ... And this (correct output) in dmesg: ppc0: interrupting at ISA irq 7 sc0: System console on isa0 sc0: VGA 16 virtual consoles, flags=0x0 sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A, console sio0: interrupting at ISA irq 4 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio1: interrupting at ISA irq 3 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 Timecounters tick every 0.976 msec Timecounter i8254 frequency 1193182 Hz Timecounter alpha frequency 598976859 Hz ad2: DMA limited to UDMA33, non-ATA66 cable or device ad2: 39266MB IC35L040AVER07-0 [79780/16/63] at ata1-master UDMA33 acd0: CDROM CD-ROM CDU4011 at ata1-slave PIO4 Mounting root from ufs:/dev/ad2a Note that everything past sc0 seems to have disappeared until it re-appears partway through multi-user startup. Its not a sysctl on a comcontrol thing, because booting single-user is similar. The output stops after sc0, and starts again when I hit return. This is a serial console, connected to a 5.0 x86 running conserver 8.5 on an 8-port comtrol rocketport card. The speed is only 9600 baud, and the console server seems to be able to handle it, so I think the problem is at the alpha end.. Drew To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-current in the body of the message ---end of quoted text--- -- | / o / /_ _ FreeBSD core team secretary |/|/ / / /( (_) Bulte [EMAIL PROTECTED] To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-current in the body of the message ---end of quoted text--- -- | / o / /_ _ [EMAIL PROTECTED] |/|/ / / /( (_) Bulte To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-current in the body of the message
Re: weird serial console issue
Wilko Bulte writes: On Tue, Dec 10, 2002 at 11:41:35PM +0100, Wilko Bulte wrote: Well, I think my DS10 does not have that problem as in: .. 50 18 10 00 00 00 03 00 02 67 60 4f 50 83 55 81 .. Try booting without verbose.. Drew To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-current in the body of the message
Re: weird serial console issue
On Wed, Dec 11, 2002 at 02:22:12PM -0500, Andrew Gallatin wrote: Wilko Bulte writes: On Tue, Dec 10, 2002 at 11:41:35PM +0100, Wilko Bulte wrote: Well, I think my DS10 does not have that problem as in: .. 50 18 10 00 00 00 03 00 02 67 60 4f 50 83 55 81 .. Try booting without verbose.. ... lpt0: Polled port ppi0: Parallel I/O on ppbus0 ppc0: interrupting at ISA irq 7 sc0: System console on isa0 sc0: VGA 16 virtual consoles, flags=0x0 sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A, console sio0: interrupting at ISA irq 4 sio1: reserved for low-level i/o vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 Timecounter i8254 frequency 1193182 Hz Timecounter alpha frequency 462383710 Hz Timecounters tick every 0.976 msec acd0: CDROM TOSHIBA CD-ROM XM-6302B at ata0-master PIO4 Waiting 15 seconds for SCSI devices to settle da0 at isp0 bus 0 target 0 lun 0 ... -- Wilko To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-current in the body of the message
Re: weird serial console issue
Wilko Bulte writes: On Wed, Dec 11, 2002 at 02:22:12PM -0500, Andrew Gallatin wrote: Wilko Bulte writes: On Tue, Dec 10, 2002 at 11:41:35PM +0100, Wilko Bulte wrote: Well, I think my DS10 does not have that problem as in: .. 50 18 10 00 00 00 03 00 02 67 60 4f 50 83 55 81 .. Try booting without verbose.. ... lpt0: Polled port ppi0: Parallel I/O on ppbus0 ppc0: interrupting at ISA irq 7 sc0: System console on isa0 sc0: VGA 16 virtual consoles, flags=0x0 sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A, console Thanks. I guess it must be somthing here, or specific to the up1000. I'm not going to worry about it. Drew To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-current in the body of the message
weird serial console issue
I just upgraded my UP1000 from 4.7-stable to 5.0. Only weird thing left is the console seems to drop a lot of characters just after syscons takes over. I see this on console: ... ppc0: interrupting at ISA irq 7 sc0: System console on isa0 sc0: VGA 16 virtual consoles, flags=0x0 net.inet.udp.blackhole: 0 - 1 Doing initial network setup: host.conf hostname domain. ... And this (correct output) in dmesg: ppc0: interrupting at ISA irq 7 sc0: System console on isa0 sc0: VGA 16 virtual consoles, flags=0x0 sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A, console sio0: interrupting at ISA irq 4 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio1: interrupting at ISA irq 3 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 Timecounters tick every 0.976 msec Timecounter i8254 frequency 1193182 Hz Timecounter alpha frequency 598976859 Hz ad2: DMA limited to UDMA33, non-ATA66 cable or device ad2: 39266MB IC35L040AVER07-0 [79780/16/63] at ata1-master UDMA33 acd0: CDROM CD-ROM CDU4011 at ata1-slave PIO4 Mounting root from ufs:/dev/ad2a Note that everything past sc0 seems to have disappeared until it re-appears partway through multi-user startup. Its not a sysctl on a comcontrol thing, because booting single-user is similar. The output stops after sc0, and starts again when I hit return. This is a serial console, connected to a 5.0 x86 running conserver 8.5 on an 8-port comtrol rocketport card. The speed is only 9600 baud, and the console server seems to be able to handle it, so I think the problem is at the alpha end.. Drew To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-current in the body of the message
Re: weird serial console issue
On Tue, Dec 10, 2002 at 02:01:16PM -0500, Andrew Gallatin wrote: I will bring my DS10 to the latest greatest -current and see what it does for me. Stay tuned (till tomorrow at least ;) W/ I just upgraded my UP1000 from 4.7-stable to 5.0. Only weird thing left is the console seems to drop a lot of characters just after syscons takes over. I see this on console: ... ppc0: interrupting at ISA irq 7 sc0: System console on isa0 sc0: VGA 16 virtual consoles, flags=0x0 net.inet.udp.blackhole: 0 - 1 Doing initial network setup: host.conf hostname domain. ... And this (correct output) in dmesg: ppc0: interrupting at ISA irq 7 sc0: System console on isa0 sc0: VGA 16 virtual consoles, flags=0x0 sio0 at port 0x3f8-0x3ff irq 4 on isa0 sio0: type 16550A, console sio0: interrupting at ISA irq 4 sio1 at port 0x2f8-0x2ff irq 3 on isa0 sio1: type 16550A sio1: interrupting at ISA irq 3 vga0: Generic ISA VGA at port 0x3c0-0x3df iomem 0xa-0xb on isa0 Timecounters tick every 0.976 msec Timecounter i8254 frequency 1193182 Hz Timecounter alpha frequency 598976859 Hz ad2: DMA limited to UDMA33, non-ATA66 cable or device ad2: 39266MB IC35L040AVER07-0 [79780/16/63] at ata1-master UDMA33 acd0: CDROM CD-ROM CDU4011 at ata1-slave PIO4 Mounting root from ufs:/dev/ad2a Note that everything past sc0 seems to have disappeared until it re-appears partway through multi-user startup. Its not a sysctl on a comcontrol thing, because booting single-user is similar. The output stops after sc0, and starts again when I hit return. This is a serial console, connected to a 5.0 x86 running conserver 8.5 on an 8-port comtrol rocketport card. The speed is only 9600 baud, and the console server seems to be able to handle it, so I think the problem is at the alpha end.. Drew To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-current in the body of the message ---end of quoted text--- -- | / o / /_ _ FreeBSD core team secretary |/|/ / / /( (_) Bulte [EMAIL PROTECTED] To Unsubscribe: send mail to [EMAIL PROTECTED] with unsubscribe freebsd-current in the body of the message