Peter Steele [EMAIL PROTECTED] writes:
Man, I wish I'd known this. I built a whole automated framework around
this, assuming you couldn't set up the initial mirror drive with a live
file system. I'll have to try your solution; it is definitely the way to
go. We are dealing with identical size
Setting this issue on a technical trail now.
1. I built a kernel with USB_DEBUG enabled.
BTW, there doesn't seem to be a way to set debug levels for USB
subsystems at boot time, i.e. via hints. Or am I missing something?
It seems that the levels can only be set via sysctl but that's too late
for
Hi All,
Is there a native interface for LRO in FreeBSD 7? I can't find any use
for IFCAP_LRO but notifying the driver if to use or not to use this
offload.
If not, is it planned for FreeBSD 8?
Thanks
Yony
___
freebsd-hackers@freebsd.org mailing list
I increased debug level in uhub and also switched mouse and keyboard
ports hoping that order might matter. It didn't.
Here's fresh usbdevs output snippet:
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x),
Intel(0x), rev 1.00
uhub2
port 1 addr 3: low
On Thu, 27 Nov 2008, Yony Yossef wrote:
Is there a native interface for LRO in FreeBSD 7? I can't find any use for
IFCAP_LRO but notifying the driver if to use or not to use this offload.
If not, is it planned for FreeBSD 8?
IFCAP_LRO is a capability/policy flag allowing drivers to declare
Mirroring the entire slice is far simpler. If you mirror individual
partitions, you have to label them *before* you newfs them.
What we're really trying to accomplish is an automated install via a PXE boot
server. Unfortunately gmirror isn't available in mfsroot at the point the file
systems
Peter Steele [EMAIL PROTECTED] writes:
Dag-Erling Smørgrav [EMAIL PROTECTED] writes:
Mirroring the entire slice is far simpler. If you mirror individual
partitions, you have to label them *before* you newfs them.
What we're really trying to accomplish is an automated install via a
PXE boot
So what you do, instead, is make sure there is a little space left over
at the end of the slice that you create in the first step. Then, once
gmirror is available, you gmirror label the slice, then gmirror insert
the corresponding slice on the other disk(s), and gmirror rebuild. No
copying
Peter Steele [EMAIL PROTECTED] writes:
The problem is I was unable to get multiple slices defined in a
sysinstall config script. I tried many variations of parameters to
pump into diskPartitionEditor and diskLabelEditor so that we could
create three slices during the install but I couldn't
I wouldn't use a sysinstall script.
Yeah, I should probably have done it that way but I inherited the existing
sysinstall framework from someone else and ended up extending it to use
gmirror. I know more about this area now and I'd like to redo the whole thing,
avoiding sysinstall. That will
On Nov 27, 2008, at 1:44 PM, Dag-Erling Smørgrav wrote:
I wouldn't use a sysinstall script.
Set up a file system (say /nfsroot) on an NFS server in your lab.
Just in case anyone needs a real step-by-step guide to getting a
diskless PXE/NFS boot going, I wrote this up a little while ago.
On Thu, Nov 27, 2008 at 4:51 AM, Robert Watson [EMAIL PROTECTED] wrote:
On Thu, 27 Nov 2008, Yony Yossef wrote:
Is there a native interface for LRO in FreeBSD 7? I can't find any use for
IFCAP_LRO but notifying the driver if to use or not to use this offload.
If not, is it planned for
On Thu, Nov 27, 2008 at 12:03 PM, Kevin Day [EMAIL PROTECTED] wrote:
On Nov 27, 2008, at 1:44 PM, Dag-Erling Smørgrav wrote:
I wouldn't use a sysinstall script.
Set up a file system (say /nfsroot) on an NFS server in your lab.
Just in case anyone needs a real step-by-step guide to getting
A few days ago libFIRM[1] and cparser were added to the ports tree. If
you want to see, what other compilers besides GCC have to offer, this
might be of interest for you. libFIRM is a modern optimizing
intermediate representation (IR) library. cparser is a C compiler
providing many useful
Le Wed, 26 Nov 2008 19:30:41 -0800 (PST),
ancelgray [EMAIL PROTECTED] a écrit :
Hi,
To AMD CS5536 users:
This is Andrew Gray. I have finished the audio driver for the AMD
CS5536 companion
chip. It is working on a PC Engines Alix 1C low power board under
FreeBSD 7.0.
It can be found
Christoph, good day.
Thu, Nov 27, 2008 at 09:39:45PM +0100, Christoph Mallon wrote:
A few days ago libFIRM[1] and cparser were added to the ports tree. If
you want to see, what other compilers besides GCC have to offer, this
might be of interest for you. libFIRM is a modern optimizing
On Thursday 27 November 2008 21:39:45 Christoph Mallon wrote:
A few days ago libFIRM[1] and cparser were added to the ports tree. If
you want to see, what other compilers besides GCC have to offer, this
might be of interest for you. libFIRM is a modern optimizing
intermediate representation
Eygene Ryabinkin schrieb:
Christoph, good day.
Thu, Nov 27, 2008 at 09:39:45PM +0100, Christoph Mallon wrote:
A few days ago libFIRM[1] and cparser were added to the ports tree. If
you want to see, what other compilers besides GCC have to offer, this
might be of interest for you. libFIRM is a
Christoph,
Thu, Nov 27, 2008 at 11:22:22PM +0100, Christoph Mallon wrote:
Both LLVM and FIRM use SSA as an important aspect of their IR. FIRM uses
[...]
Very interesting, thanks for a good review!
Did you find the frontend examples interesting or are you mainly
interested in optimization and
Max Laier schrieb:
On Thursday 27 November 2008 21:39:45 Christoph Mallon wrote:
A few days ago libFIRM[1] and cparser were added to the ports tree. If
you want to see, what other compilers besides GCC have to offer, this
might be of interest for you. libFIRM is a modern optimizing
intermediate
On Nov 27, 2008, at 2:30 PM, Garrett Cooper wrote:
On Thu, Nov 27, 2008 at 12:03 PM, Kevin Day [EMAIL PROTECTED] wrote:
Just in case anyone needs a real step-by-step guide to getting a
diskless
PXE/NFS boot going, I wrote this up a little while ago.
21 matches
Mail list logo