Gayn Winters [EMAIL PROTECTED] writes:
Thus to get ICH6R supported on 5.4 I need to load 5.4R onto one drive,
apply the mk3 patch, recompile, reboot, build a release bootable CD,
shutdown, reset the hardware to RAID1, and reload from the new CD. This
ought to work like it does using
Hello, Gayn,
From: Gayn Winters [EMAIL PROTECTED]
Subject: ICH6R RAID
Date: Wed, 29 Jun 2005 19:01:31 -0700
I even tried building the mirror then disabling one drive using the
firmware setup. The firmware says then to have the OS rebuild the
mirror. OK,... The OS then boots fine to ad4
]
Sent: Thursday, June 30, 2005 4:03 AM
To: Gayn Winters
Cc: freebsd-hackers@freebsd.org
Subject: Re: ICH6R RAID
Gayn Winters [EMAIL PROTECTED] writes:
Now man ata(4) indicates that only up to ICH5 is supported
in 5.4 while
up to ICH6 is supported in 6.0, but the hardware archives
Gayn Winters [EMAIL PROTECTED] writes:
Now man ata(4) indicates that only up to ICH5 is supported in 5.4 while
up to ICH6 is supported in 6.0, but the hardware archives indicate that
sos's MK3 patches made it into 5.4-RELEASE, and 6.0 fully supports the
ICH6R. However, I'm actually not sure
It appears that I'm not the only one struggling with the RAID1 using
Intel's ICH6R. (My mobo is a Tyan S5150 with two identical 80GB WD
SATA drives.) Using either 5.4-RELEASE or 6.0-CURRENT-SNAP004 the OS
seems to load from the release CD but fails to boot from the RAID array.
(5.4 drops into
5 matches
Mail list logo
