Hi Dejvid,
just a suggestion: In production environments it is a must to also
take over the cluster partner's mac address. Something that
would make a nice plus to your script.
Regards,
Andreas
---
switch
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in
2) I don't have any boards that don't work correctly.
I have several. If you send me your surface-mail address, I can ship one to
you.
Kees Jan
You are only young once,
but you can stay immature all your life.
To Unsubscribe:
hi,
we are writing a driver(FreeBSD 4.0) for a switch connected to a PCI port.
the interrupt handling routine is not getting called. we checked the
switch IRQ status register and find some interrupts to be pending. we
have no clue about what is happening, can someone give a few ideas about
what
Warner Losh wrote:
In message [EMAIL PROTECTED] "Dan Langille" writes:
: http://www.freebsd.org/handbook/kernelconfig-building.html
This change should do the trick if I'm reading things right.
It's still KERNEL= in -stable though I think. I think I'll just add a
note which says "in
just a suggestion: In production environments it is a must to also
take over the cluster partner's mac address. Something that
would make a nice plus to your script.
I was thinking about that I don't see that this is a must in production
environment because when you assign a new
* Mike Smith ([EMAIL PROTECTED]) wrote:
I am currently trying to port the compatability layer of a linux
kernel driver to FreeBSD 4.x. The bit I'm stuck on at the moment
is, how do I map arbitrary physical address space to kernel virtual
address space (ala ioremap() in linux) ? Thanks.
On normal internetworking hosts, without the necessity of high
availability
this works fine. Not all hosts do update or even flush their arp cache
with
the same frequency though. Some have a cycle of less than one minute on
routers on the other hand the default arp cache timeout is a lot
A little background:
I have an application that uses kqueue to manage many, many sockets (and it
works wonderfully, btw). I'm using non-blocking I/O, so my application
can certainly work without threads. However, each incoming connection needs
to access a back-end RADIUS or LDAP server
On Tue, 23 Jan 2001 23:21:46 -0800, Jos Backus [EMAIL PROTECTED] said:
Jos I have the same problem with a Win2k system and a FreeBSD system
Jos connected to an OmniCube 4-port switch, at rev. 1.5 (see the
Jos bottom of the unit). Belkin says it's fixed in rev. 1.9 and is
Jos willing to exchange
Heeey, thank you guys. That is very useful information. I just got off
the phone with Belkin and my replacement KVM is on the way
Thanks,
Matt
-Original Message-
From: Chris Shenton [mailto:[EMAIL PROTECTED]]
Sent: Wednesday, January 24, 2001 10:11 AM
To: Jos Backus
Cc:
I have discovered a rather interesting bug with this combination,
and was wondering if anyone could point me in the right direction
to help me track it down.
The problem is that linux binaries which call getdirents on an afs
directory do not report the last directory entry:
/afs/whatever%
Silly me--I forgot to mention, this is with FreeBSD 4.2-STABLE.
Chris
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-hackers" in the body of the message
Warner Losh wrote:
In message [EMAIL PROTECTED] "Dan Langille"
writes:
: http://www.freebsd.org/handbook/kernelconfig-building.html
This change should do the trick if I'm reading things right.
It's still KERNEL= in -stable though I think. I think I'll just add a
note which says
Another question in a similar vein:
Which, if any (besides root and nobody, which are a given), of these
default accounts are critical to the basic functionality of the box? Is
there a list somewhere where I can match these phantom/daemon users to
their functionality/dependencies? I'd just as
At 10:32 AM 01/24/2001, David Rufino wrote:
* Mike Smith ([EMAIL PROTECTED]) wrote:
I am currently trying to port the compatability layer of a linux
kernel driver to FreeBSD 4.x. The bit I'm stuck on at the moment
is, how do I map arbitrary physical address space to kernel virtual
I have discovered a rather interesting bug with this combination,
and was wondering if anyone could point me in the right direction
to help me track it down.
The problem is that linux binaries which call getdirents on an afs
directory do not report the last directory entry:
Hmm. Could it
In message 3A6F4748.15758.2090E6@localhost, "Marco van de Voort" writes:
I have discovered a rather interesting bug with this combination,
and was wondering if anyone could point me in the right direction
to help me track it down.
The problem is that linux binaries which call getdirents on
Matt Chew Spence wrote:
Another question in a similar vein:
Which, if any (besides root and nobody, which are a given), of these
default accounts are critical to the basic functionality of the box? Is
there a list somewhere where I can match these phantom/daemon users to
their
I am wondering why FreeBSD has fixed number of buffer headers (nbuf) while
Linux can grow the number of buffer headers on the fly. In FreeBSD, we
have a lofreebuffers count. I think this is a reserve for avoiding
deadlock when the buffer headers are low. But Linux does not seem to have
such a
-BEGIN PGP SIGNED MESSAGE-
Just a simple question, FreeBSD doesn't support/emulate any IDE CDRW?
Thank's
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
. Felix-Antoine Paradis. cell:1-418-261-0865 .
. IRC: reel @ DALnet . job:Idemnia Network .
.
I'll look into the Linux driver, however, and see if it has anything
useful in it. Historically the Linux Pro/100+ driver has totally sucked and
was chalk-full of magic numbers being anded and ored.
That's "chock full", and you're confusing the Becker driver (bad) with
the
On Wed, Jan 24, 2001 at 05:04:23PM -0500, Felix-Antoine Paradis wrote:
Just a simple question, FreeBSD doesn't support/emulate any IDE CDRW?
Not sure if that is a question or not, but you probably want to look
over ata(4) and burncd(8).
--
Chris D. Faulhaber - [EMAIL PROTECTED] - [EMAIL
-BEGIN PGP SIGNED MESSAGE-
I don't have theses installed here, not even in my port tree... you know
where i could get them?
Thank's
On Wed, 24 Jan 2001, Chris Faulhaber wrote:
On Wed, Jan 24, 2001 at 05:04:23PM -0500, Felix-Antoine Paradis wrote:
Just a simple question, FreeBSD
In local.freebsd.hackers you write:
-BEGIN PGP SIGNED MESSAGE-
Just a simple question, FreeBSD doesn't support/emulate any IDE CDRW?
See burncd(1). I know for a fact that it works with:
acd0: CD-RW LG CD-RW CED-8083B at ata1-master using WDMA2
Don't think you can use IDE CD/RW with
I have been using divert sockets for a while sending small ( MTU) UDP
packets and everything worked fine. Now that the UDP packets are larger
(MTU = 1500) and hence fragmentation is taking place there seems to be a
problem. tcpdump tells me that the fragmented packets arrive but it seems
that
it depends on what template do you use for matching.
the firewall acts before reassembly, so for the fragments you will
not be able to see the port numbers.
cheers
luigi
I have been using divert sockets for a while sending small ( MTU) UDP
packets and everything worked fine.
I was originally diverting udp packets heading to a particular port then
I flushed the ipfw and tried:
ipfw add 6 divert 4422 ip all from any to any in
and still no packets are received by recvfrom(). Would the port numbers
matter for this case.
Alwyn
[EMAIL PROTECTED]
On Wed, 24
I'll look into the Linux driver, however, and see if it has anything
useful in it. Historically the Linux Pro/100+ driver has totally sucked and
was chalk-full of magic numbers being anded and ored.
That's "chock full", and you're confusing the Becker driver (bad) with
the
I was originally diverting udp packets heading to a particular port then
I flushed the ipfw and tried:
ipfw add 6 divert 4422 ip all from any to any in
and still no packets are received by recvfrom(). Would the port numbers
matter for this case.
probably not but better check if you
In message [EMAIL PROTECTED], David Greenman writes:
"drivers for every major OS"? They have drivers for Windows, Window/NT,
and Linux. Of those Linux is the closest to FreeBSD, but that's like saying
that a penguin is similar to a human because they are both mammals.
Pinguins are birds...
In message [EMAIL PROTECTED], David Greenman writes:
"drivers for every major OS"? They have drivers for Windows, Window/NT,
and Linux. Of those Linux is the closest to FreeBSD, but that's like saying
that a penguin is similar to a human because they are both mammals.
Pinguins are birds...
After upgrading to FreeBSD 4.2(from 4.1) and MySQL 3.23.32 (from 3.22.32), I
kept seeing mysqld crashes after a few minutes of heavy load. I traced it
down to one rather situation. Every time it crashed, I was getting a
segfault inside __dtoa (which was called by sprintf). If I looked at other
* Kevin Day [EMAIL PROTECTED] [010124 16:30] wrote:
After upgrading to FreeBSD 4.2(from 4.1) and MySQL 3.23.32 (from 3.22.32), I
kept seeing mysqld crashes after a few minutes of heavy load. I traced it
down to one rather situation. Every time it crashed, I was getting a
segfault inside
A lot of good progress has been made on the SMP project in the past couple
of weeks. We are on the verge of being able to move portions of the kernel
out of under the Giant lock, which will be the first improvement in
performance due to our work, following a long string of developments over
the
David Greenman wrote:
supporting it if someone ported it over to freebsd? they have drivers for
just about every other major OS except BSD. it would be nice if the driver
was updated BEFORE cards and MBs that dont work started showing up on the
loading dock. Every time I get a shipment we
David Greenman wrote:
supporting it if someone ported it over to freebsd? they have drivers for
just about every other major OS except BSD. it would be nice if the driver
was updated BEFORE cards and MBs that dont work started showing up on the
loading dock. Every time I get a shipment we
On Wednesday, January 24, 2001, Dave Hayes wrote:
I was asked recently if it was possible to run a FreeBSD server
entirely off of CDROM. Now I know that things like /var need to be
writable, and that the initial question as worded was rather naive.
However, modulo writable filesystems which
On Wed, Jan 24, 2001 at 11:12:24AM -0800, Matt Chew Spence wrote:
Another question in a similar vein:
Which, if any (besides root and nobody, which are a given), of these
default accounts are critical to the basic functionality of the box? Is
there a list somewhere where I can match
On Wed, Jan 24, 2001 at 12:50:29PM -0600, Chris wrote:
Silly me--I forgot to mention, this is with FreeBSD 4.2-STABLE.
How recent -stable? A bug like this was fixed recently. If it's older
than a week, Try upgrading :-)
Kris
--
NOTE: To fetch an updated copy of my GPG key which has not
On Wed, Jan 24, 2001 at 05:04:23PM -0500, Felix-Antoine Paradis wrote:
Just a simple question, FreeBSD doesn't support/emulate any IDE CDRW?
It supports them just fine..
Perhaps your question was really "does FreeBSD emulate a SCSI
interface to ATAPI drives?", in which case the answer is "no".
On Wed, Jan 24, 2001 at 04:53:39PM -0800, Dave Hayes wrote:
I was asked recently if it was possible to run a FreeBSD server
entirely off of CDROM. Now I know that things like /var need to be
writable, and that the initial question as worded was rather naive.
However, modulo writable
Chris Costello [EMAIL PROTECTED] writes:
When you boot into your CD, and after the CD is mounted as /,
mount the disk as a union with the CD /. The result is that
you'll have the executables on the CD, but any data being written
will go to the disk.
Hmm, I had considered that strategy.
On Wed, 24 Jan 2001, Dave Hayes wrote:
I was asked recently if it was possible to run a FreeBSD server
entirely off of CDROM. Now I know that things like /var need to be
writable, and that the initial question as worded was rather naive.
However, modulo writable filesystems which can be
After upgrading to FreeBSD 4.2(from 4.1) and MySQL 3.23.32 (from 3.22.32), I
kept seeing mysqld crashes after a few minutes of heavy load. I traced it
down to one rather situation. Every time it crashed, I was getting a
segfault inside __dtoa (which was called by sprintf). If I looked at
In article
local.mail.freebsd-hackers/[EMAIL PROTECTED] you
write:
I'll look into the Linux driver, however, and see if it has anything
useful in it. Historically the Linux Pro/100+ driver has totally sucked and
was chalk-full of magic numbers being anded and ored.
That's "chock
On Wednesday, 24 January 2001 at 17:08:16 -0500, Dennis wrote:
I'll look into the Linux driver, however, and see if it has anything
useful in it. Historically the Linux Pro/100+ driver has totally sucked and
was chalk-full of magic numbers being anded and ored.
That's "chock full", and
I've come in in the middle of this discussion, so maybe there's
something I don't know, but on the same hardware and running FreeBSD,
I had no problems. Why should we want to replace the driver with
something which doesn't work well?
There's been a hint of 'vendor supported'
To
On Wednesday, 24 January 2001 at 21:07:45 -0800, Matt Jacob wrote:
I've come in in the middle of this discussion, so maybe there's
something I don't know, but on the same hardware and running FreeBSD,
I had no problems. Why should we want to replace the driver with
something which doesn't
In message [EMAIL PROTECTED] Chris Costello writes:
:What you'd need is a writable medium, preferable a hard disk,
: with whatever file system you want to use on it, and a CD with a
: stripped-down FreeBSD installation, complete with a kernel that
: matches your hardware.
You don't need a
On Wednesday, 24 January 2001 at 21:07:45 -0800, Matt Jacob wrote:
I've come in in the middle of this discussion, so maybe there's
something I don't know, but on the same hardware and running FreeBSD,
I had no problems. Why should we want to replace the driver with
something which
In message [EMAIL PROTECTED] Fred
Clift writes:
: When you figure it out and get it working, make a web page giving the
: step-by-step guide to how to do it... :)
We get pretty far by having
root_rw_mount=NO
diskless_mount=/etc/rc.diskless2
varsize=8192
update_motd=NO
in rc.conf and a
In message [EMAIL PROTECTED] Jordan Hubbard writes:
: You don't even need a disk if you have enough memory. You can come up
: with an MFS and put everything you need to write on in that (via union
: mount or symlinks or whatever).
At timing solutions we found union mount to be a non-starter.
On Wednesday, January 24, 2001, Warner Losh wrote:
You don't need a writable medium to run FreeBSD. Well, I take that
back, you do need a writable partition, but that can be mfs. We run
off CF which is mounted read only with the usual rc.diskless tricks
for creating /var and /dev. Similar
On 24 Jan 2001, Kevin Mills wrote:
My question: Is it considered "safe" to have a number of threads each
waiting on a call to kevent() using the same kqueue? Or do I need to
have one thread waiting on the kevent() call and have it dispatch jobs
to the waiting threads?
You should
Hi,
Is it possible to provide pseudo ethernet interfaces?
Can we associate an IP and MAC address with a psuedo ethernet interface
to facilitate data packet transmission reception through that?
If so, how does it work?
Pointers to any documentation in this regard will be appreciated.
55 matches
Mail list logo
