Current FreeBSD problem reports
Critical problems
Serious problems
S Tracker Resp. Description
a kern/38554 netchanging interface ipaddress doesn't seem to work
s kern/39937 netipstealth
hello everybody
i encountered some problems with the intel 82571EB chipset when i
tried to upgrade from FreeBSD 6.1-RELENG to 6.2-RELENG/7.0-CURRENT on
a network appliance (NEXCOM 1108GL)
the appliance has 3 different intel ethernet controllers soldered
to the motherboard
E1000_DEV_ID_82541GI
The 82571 device has been supported for a long time, the trick
comes when you have a gang of them how the thing is all wired
up, we have had issues even with our quad port adapters and
some vendor BIOS's. This is a custom so I'm only going to be
able to guess that its interrupts.
You say no
From the NOTES file in /usr/src/sys/conf:
# Note YOU MUST have both INET and INET6 defined.
# you don't have to enable V6, but SCTP is
# dual stacked and so far we have not teased apart
# the V6 and V4.. since an association can span
# both a V6 and V4 address at the SAME time :-)
This
Hi,
Is there any way compiling SCTP library without IPv6? I have specified
-UAF_INET6 in libnetworking Makefile DEFS, but it didn't work :(.
I have found that there is #ifdef AF_INET6 condition in sctp_header.h and in
socket.h, there is #define AF_INET6 28. So, the prior condition is a
sazzadur rahman wrote:
Hi,
Is there any way compiling SCTP library without IPv6? I have specified
-UAF_INET6 in libnetworking Makefile DEFS, but it didn't work :(.
I have found that there is #ifdef AF_INET6 condition in sctp_header.h
and in
Nope.. sorry .. the stack is dual stack only. We
many thanks for your feedback jack
you might well be right with the problems popping up when using a
bunch of 571's
...anyway - its just that on 6.1-RELENG we never had a problem with
the 571's
[ You say no traffic works, on NONE of the ports?? Do you have
anyway to disable part of them? Do the
I've found one of the causes of the network instability of FreeBSD 7; the
tcp syncache fails to retransmit SYN-ACK packets. This causes interesting
problems when packet loss is experienced during connection setup. The
symptoms that I have witnessed are twofold:
1. If the third part of
