Re: mallocing from if_start

On Wed, 12 Mar 2003, Jonathan Lemon wrote: JL>In article you write: JL>> JL>>Hi all, JL>> JL>>I was under the impression that the if_start function is NOT called from JL>>an interrupt context, so I should be able to call uma_zalloc_arg(..., JL>>M_WAITOK) there. I get however JL>> JL>>Mar 12 18:12

Re: MPD in dynamic

Dennis S. Davidoff wrote: I have a *little* quastion to programmers about mpd. I have alot of _dynamic_ users in FreeRadius (there's alot of users rotations with their ip-addresses). I know there's no dynamic bundles and links in mpd, so have anyone time and insterest to make this feature? > I wor

Re: Cisco PIX 501 (3DES) to FreeBSD VPN Gateway

I have a similar setup from my home (FreeBSD) to my work (PIX-515) 10/8 is my work 192.168.X.0/24 is my home - this setup will give you 3des encrypt tunnel with a Pre-Shared Key Your PIX will need these config lines(adjust to match your networks): access-list ipsec-ok-list permit ip 10.0.0.0 255.

Re: MPD in dynamic

Hi! On Thu, 13 Mar 2003, Dennis S. Davidoff wrote: > Hi all. > > I have a *little* quastion to programmers about mpd. > I have alot of _dynamic_ users in FreeRadius (there's alot of users > rotations with their ip-addresses). I know there's no dynamic bundles > and links in mpd, so have anyone

Re: MPD in dynamic

Alexandre Kardanev wrote: You information is very old. mpd-3.13 & FreeBSD >=4.7 (new libradius only there) have dinamic (from RADIUS) IP assignement. There are 2 restrictions: 1) (as reported here) - mpd can not create more then 254 ng interfaces - so you will have no more then 254 simultaneous con

Re: MPD in dynamic

Hi, Alexandre Kardanev schrieb: Hi! 1) (as reported here) - mpd can not create more then 254 ng interfaces - so you will have no more then 254 simultaneous maybe a netgraph limit? connections at a time. 2) as found I - mpd with RADIUS cannot use Microsoft encription (MPPE) sure it can, there is

Re: MPD in dynamic

Hi! On Thu, 13 Mar 2003, Michael Bretterklieber wrote: > Hi, > > Alexandre Kardanev schrieb: > > Hi! > > 1) (as reported here) - mpd can not create more then 254 ng interfaces - > > so you will have no more then 254 simultaneous > maybe a netgraph limit? > I didn't tried that myself. I just saw

Re: MPD in dynamic

Hi, Alexandre Kardanev schrieb: Hi! Unfortunately, I used that patch first, after mpd-3.13 I compared and found no significant differences. Of cause, maybe I misconfigured my RADIUS server, also in mpd log I found: [pptp12] RADIUS: RadiusGetParams: RAD_MICROSOFT_MS_MPPE_ENCRYPTION_POLICY: 1 (Allo

MPD, FreeRadius, MSCHAPv2

Hello. Has anyone the successful decision of subj? :) P.S. Is there a tool for Windows to test MSCHAPv2? NTRadPing use only CHAP (MSCHAPv1?) -- Sincerely, Dennis To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-net" in the body of the message

Re: MPD in dynamic

A> > http://www.bretterklieber.com/freebsd/radius.diff A> A> Unfortunately, I used that patch first, after mpd-3.13 I compared and A> found no significant differences. Of cause, maybe I misconfigured my A> RADIUS server, also in mpd log I found: A> [pptp12] RADIUS: RadiusGetParams: RAD_MICROSOFT_M

Re: MPD, FreeRadius, MSCHAPv2

Hi, Dennis S. Davidoff schrieb: Hello. Has anyone the successful decision of subj? :) P.S. Is there a tool for Windows to test MSCHAPv2? NTRadPing use only CHAP (MSCHAPv1?) - Install php 4.3.1, - donwload the php-radius extension from http://www.bretterklieber.com/php/radius-builds/win32-i386/4

Re: route pointing to a gateway that's not on net

On Thu Mar 6 23:56:51 2003, [EMAIL PROTECTED] suggested: > Use : > route add -net 10.17.47.37/32 -cloning -iface xl0 > that sould work. I've tried several variations of this with limited success: Script started on Thu Mar 13 12:26:27 2003 # ifconfig xl0 inet 209.122.66