On Wed, Apr 12, 2017 at 04:12:45PM +0200, Jan Beich wrote:
> Michael Gmelin writes:
> > It's probably busy compressing the package. Try setting
> > PKG_NOCOMPRESS=1 in /etc/make.conf (works ok when just building a
> > package with make, didn't test with poudriere[0]). When
> On 13 Apr, 2017, at 8:15, Rafael Henrique da Silva Faria
> wrote:
>
> The new version of the lib exists:
>
> root@cenpe / # ls -al /usr/local/lib/libcrypto.so
> lrwxr-xr-x 1 root wheel 19 Apr 13 10:29 /usr/local/lib/libcrypto.so ->
> libcrypto.so.41.0.1
>
>
Hello.
I'm using ThunderBird (updated to the latest available port version) on
a 10.3/i386 with XFCE and I'm experiencing an annyoing bug.
I'm writing here, since I don't know (yet) if it's FreeBSD specific.
While Ctrl + and Ctrl - should enlarge/reduce the font of the message
I'm viewing,
Dear port maintainer,
The portscout new distfile checker has detected that one or more of your
ports appears to be out of date. Please take the opportunity to check
each of the ports listed below, and if possible and appropriate,
submit/commit an update. If any ports have already been updated,
Dear
I saw that the OpenCV port does not have a maintainer. However, until
recently there was an effort to port OpenCV3 to FreeBSD. Has Opencv 2
been abandoned because of OpenCV3 or does it have no correlation?
[]'s
-Otacilio
___
[I accidentally sent the original of the "on . . . wrote"
below to the wrong toolchain list. This just corrects that.]
[I'll also note that lang/gcc6-aux was indirectly attempted
when I tried to build ports-mgmt/synth on a Pine64+ 2GB
(an aarch64 context). I had noticed the recent update claiming
As means of investigating if lang/gcc6-aux has other problems
building on aarch64 than just __nonnull and __nonull_all I did:
# svnlite diff /usr/src/sys/sys/
Index: /usr/src/sys/sys/cdefs.h
===
--- /usr/src/sys/sys/cdefs.h
>> But, as I know, the make process of the Heimdal, can't abort if the actually
>> installed Heimdal is broken. Or I really need an clean system (without > any
>> previous installed Heimdal) to compile it?
>
> Many ports cannot compile correctly if previous versions are installed. This
> is why
Does it exist?
ls -al /usr/local/lib/libcrypto.so.38
___
freebsd-ports@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
The new version of the lib exists:
root@cenpe / # ls -al /usr/local/lib/libcrypto.so
lrwxr-xr-x 1 root wheel 19 Apr 13 10:29 /usr/local/lib/libcrypto.so ->
libcrypto.so.41.0.1
But the .38, which I believe that was from previous version, does not.
root@cenpe / # ls -al
I had the same problem with other ports. Portmaster does not compile every
times the ports in the right order.
Try it, with portmaster -x heimdal security/libressl.
___
freebsd-ports@freebsd.org mailing list
I tried with "portmaster -x heimdal security/libressl". The LibreSSL port was
recompiled with success. But it was already up to date before.
But yet, if I try to recompile heimdal, with just a simple: "cd
/usr/ports/security/heimdal; make clean; make", it will abort.
But in Heimdal configure,
Sorry, last post was wrong.
libcrypto.so.41 should be
ls -al /usr/local/lib/libcrypto.so
lrwxr-xr-x 1 root wheel 19 12 Apr 05:06 /usr/local/lib/libcrypto.so
-> libcrypto.so.41.0.1
___
freebsd-ports@freebsd.org mailing list
> On Apr 13, 2017, at 20:38, Mark Millard wrote:
>
> [I accidentally sent the original of the "on . . . wrote"
> below to the wrong toolchain list. This just corrects that.]
>
> [I'll also note that lang/gcc6-aux was indirectly attempted
> when I tried to build
On Thu, 13 Apr 2017 21:48:06 -0300
Otacílio wrote:
> I saw that the OpenCV port does not have a maintainer. However, until
> recently there was an effort to port OpenCV3 to FreeBSD. Has Opencv 2
> been abandoned because of OpenCV3 or does it have no correlation?
No
> I'm using a openCV 3.2 in my box, but I don't have time to
> lean to create a new port. I need finish my qualify exam to Phd
>
> If yopu need some help I can help you.
>
All ready done: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=210505
Em 2017-04-13 21:48, Otacílio escreveu:
Dear
I saw that the OpenCV port does not have a maintainer. However, until
recently there was an effort to port OpenCV3 to FreeBSD. Has Opencv 2
been abandoned because of OpenCV3 or does it have no correlation?
[]'s
-Otacilio
Hi Otacilio,
In case it helps someone else, I had encountered the symptoms cited in
UPDATING entry 20170411, but the UPDATING entry didn't exist at the
time.
So I poked around, and discovered that -- in my case -- the thing that
was apparently causing the problem was that lang/python27 had been built
with
The patch does not apply.
Only the first file is patched, the two others are rejected.
___
freebsd-ports@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to
Sorry, seems it was my error.
___
freebsd-ports@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"
Hi everyone, I'm trying to compile Heimdal with LibreSSL on a server, but there
is a odd problem.
Actually, I'm updating a working server, updated the LibreSSL version, and
tried to recompile all dependent ports with "portmaster -fr libressl", but it
stops on Heimdal.
The make stops on this
Please, read /usr/ports/UPDATING
20170411:
AFFECTS: www/firefox
AUTHOR: ge...@freebsd.org
___
freebsd-ports@freebsd.org mailing list
https://lists.freebsd.org/mailman/listinfo/freebsd-ports
To unsubscribe, send any mail to
22 matches
Mail list logo