Re: editors/libreoffice configure error

On 12/3/20 9:34 AM, Per olof Ljungmark wrote: Hi all, Ideas welcome how to solve this, a week ago or so it built fine on r367678. FreeBSD 12.2-STABLE #0 r368189M libreoffice-7.0.3.1_2 trying to build from ports X CUPS X Kf5 X QT5 X TEST X WEBDAV Stops at configure: WARNING: unrecognized

editors/libreoffice configure error

Hi all, Ideas welcome how to solve this, a week ago or so it built fine on r367678. FreeBSD 12.2-STABLE #0 r368189M libreoffice-7.0.3.1_2 trying to build from ports X CUPS X Kf5 X QT5 X TEST X WEBDAV Stops at configure: WARNING: unrecognized options: --with-build-version Thank you in

Re: Several kf5 qt5 ports fail build

On 2020-06-18 09:58, Per olof Ljungmark wrote: Updated ports and 12.1-STABLE r362185 Failures like this, anyone here having the same problem or am I alone? Asnwering myself: Delete the ports first, then build. Forgot this. Per ___ freebsd-ports

Several kf5 qt5 ports fail build

Updated ports and 12.1-STABLE r362185 Failures like this, anyone here having the same problem or am I alone? Determining if the __GLIBC__ exist failed with the following output: Change Dir: /usr/ports/x11-toolkits/kf5-kdesignerplugin/work/.build/CMakeFiles/CMakeTmp Run Build

Re: cups-pdf crash status -139

On 2020-06-17 23:30, Tatsuki Makino wrote: Hello. If you want a quick solution, create the following symlink. ln -s /usr/local/etc/cups /etc/cups There are two bug reports about it. Bug 244530, 246955. 244530 also describes how to fix it. If the queue gets corrupted, use the following command

Re: cups-pdf crash status -139

On 2020-06-17 11:23, Michael Gmelin wrote: On Wed, 17 Jun 2020 09:43:35 +0200 Per olof Ljungmark wrote: On 2020-06-16 12:15, Michael Gmelin wrote: On 16. Jun 2020, at 11:47, Per olof Ljungmark wrote: On 2020-06-15 16:14, Michael Gmelin wrote: On Mon, 15 Jun 2020 12:03:17 +0200

Re: cups-pdf crash status -139

;) But the locale did not change at all since the boxes where installed, so why now? /usr/share/locale/en_US.UTF8/LC_TIME does exist but perhaps I don't get what you are trying to say. The locale for the shell is sv_SE.UTF-8 On 18/06/2020 12:04 am, Per olof Ljungmark wrote: On 2020-06-17 11:23, Michael

Re: cups-pdf crash status -139

On 2020-06-17 11:23, Michael Gmelin wrote: On Wed, 17 Jun 2020 09:43:35 +0200 Per olof Ljungmark wrote: On 2020-06-16 12:15, Michael Gmelin wrote: On 16. Jun 2020, at 11:47, Per olof Ljungmark wrote: On 2020-06-15 16:14, Michael Gmelin wrote: On Mon, 15 Jun 2020 12:03:17 +0200

Re: cups-pdf crash status -139

On 2020-06-17 11:23, Michael Gmelin wrote: Could you share your relevant config files, so I can try to reproduce the problem? Thanks, Michael [Files emailed privately.] ___ freebsd-ports@freebsd.org mailing list

Re: cups-pdf crash status -139

On 2020-06-16 12:15, Michael Gmelin wrote: On 16. Jun 2020, at 11:47, Per olof Ljungmark wrote: On 2020-06-15 16:14, Michael Gmelin wrote: On Mon, 15 Jun 2020 12:03:17 +0200 Per olof Ljungmark wrote: On 2020-06-15 09:50, Michael Gmelin wrote: On 15. Jun 2020, at 09:45, Per olof

Re: cups-pdf crash status -139

On 2020-06-15 16:14, Michael Gmelin wrote: On Mon, 15 Jun 2020 12:03:17 +0200 Per olof Ljungmark wrote: On 2020-06-15 09:50, Michael Gmelin wrote: On 15. Jun 2020, at 09:45, Per olof Ljungmark wrote: What happens if you run the gs command on the pdf you’re printing directly

Re: cups-pdf crash status -139

On 2020-06-15 09:50, Michael Gmelin wrote: On 15. Jun 2020, at 09:45, Per olof Ljungmark wrote: What happens if you run the gs command on the pdf you’re printing directly: gs -q -dNOPAUSE -dBATCH -dSAFER -dNOMEDIAATTRS -sstdout=? -sDEVICE=ps2write -dShowAcroForm -sOUTPUTFILE

cups-pdf crash status -139

Since a ports update late May of a FreeBSD 12-STABLE r359866, cups-pdf crashes. Furter, despite configured logging in cups-pdf.conf, there is nothing logged at all in /var/log/cups/. Cups itself still logs to error_log, but even in debug mode there is not much to tell. Having rebuilt all

Re: Bind 9.16 port error still lingers

On 2020-05-02 19:29, The Doctor via freebsd-ports wrote: On Sat, May 02, 2020 at 06:53:18PM +0200, Christoph Moench-Tegeder wrote: ## The Doctor via freebsd-ports (freebsd-ports@freebsd.org): [snip] //Use with the following in named.conf, adjusting the allow list as needed: key "rndc-key"

Re: Bind 9.16 port error still lingers

On 2020-05-02 17:16, The Doctor via freebsd-ports wrote: On Sat, May 02, 2020 at 04:32:10PM +0200, Christoph Moench-Tegeder wrote: ## The Doctor via freebsd-ports (freebsd-ports@freebsd.org): Subject: Bind 9.16 port error still lingers "Still"? May 1 21:29:02 gallifrey named[90441]:

Re: openssl problem after 11 -> 12

On 2020-04-15 00:39, Matthias Andree wrote: Finally managed to figure it out, you need to tell the perl script exactly what cipher to use, so I added to 'check_ilo2_health.pl': --sslopts 'SSL_verify_mode => SSL_VERIFY_NONE, SSL_version => "TLSv1_1", SSL_cipher_list => "EDH-RSA-DES-CBC3-SHA"'

Re: openssl problem after 11 -> 12

On 2020-04-14 19:48, Per olof Ljungmark wrote: On 2020-04-14 17:08, Mathieu Arnold wrote: On Tue, Apr 14, 2020 at 11:58:05AM +0200, Per olof Ljungmark wrote: Hello, After upgrading our Nagios host, I can no longer get status from our older HP servers with iLO3. Using a perl script

Re: openssl problem after 11 -> 12

On 2020-04-14 17:08, Mathieu Arnold wrote: On Tue, Apr 14, 2020 at 11:58:05AM +0200, Per olof Ljungmark wrote: Hello, After upgrading our Nagios host, I can no longer get status from our older HP servers with iLO3. Using a perl script, check_ilo2_health.pl, this stopped working due to lack

Re: openssl problem after 11 -> 12

On 2020-04-14 13:52, Eugene Grosbein wrote: 14.04.2020 16:58, Per olof Ljungmark wrote: I am at loss right now on how I could teach the FBSD-12 system to use the older ciphers, it still works fine from 11. Easiest way would be untar'ing FreeBSD 11 base.txz into chroot area and copy your

openssl problem after 11 -> 12

Hello, After upgrading our Nagios host, I can no longer get status from our older HP servers with iLO3. Using a perl script, check_ilo2_health.pl, this stopped working due to lack of support of older ciphers in base openssl. So far, I installed openssl from ports and enabled the weak

Re: make GIMP understand HEIF?

On 2019-10-04 19:39, Christoph Moench-Tegeder wrote: ## Per olof Ljungmark (p...@nethead.se): Anyone knows? So far installed libheif and recompiled ImageMagick with HEIF option, what more is needed? If you want gimp to support HEIF files, you should try option LIBHEIF on graphics/gimp-app

make GIMP understand HEIF?

Anyone knows? So far installed libheif and recompiled ImageMagick with HEIF option, what more is needed? Thanks, //per ___ freebsd-ports@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail

Re: nextcloudclient host not found

On 2019-09-06 16:54, Per olof Ljungmark wrote: FreeBSD12.0-STABLE and nextcloudclient-0.0.0.20190705_3 The client syncs fine for some time, then gives up with QNetworkReply::HostNotFoundError "Host mynextcloudhost not found" QVariant(Invalid) and it is impossible to restart the sy

nextcloudclient host not found

FreeBSD12.0-STABLE and nextcloudclient-0.0.0.20190705_3 The client syncs fine for some time, then gives up with QNetworkReply::HostNotFoundError "Host mynextcloudhost not found" QVariant(Invalid) and it is impossible to restart the sync. https://mynextcloudhost/status.php works well from a

Re: Thunderbird 68 oddities

On 2019-09-01 19:58, Andrea Venturoli wrote: On 2019-09-01 15:07, Per olof Ljungmark wrote: - Some attachments are not accessible, "Save As" is greyed Please see https://bugzilla.mozilla.org/show_bug.cgi?id=1576584 There you'll find a workaround, but I'll also be glad if you c

Thunderbird 68 oddities

Since 68.0 Thunderbird does not work as smooth as before here. FreeBSD 11.3-STABLE #0 r351126, ports updated today With default port options: - It takes MUCH longer before displaying a message, but this is folder dependent. Some takes up approx one minute - Some messages are not marked as

Re: Python27 install problem - Undefined symbol rl_callback_sigcleanup

Think George Mitchell just answered my question - old cruft yes. On 2019-04-14 12:19, Per olof Ljungmark wrote: This is a recent 11-STABLE jail but it may contain cruft from a previous 10 (or maybe even earlier) install. Portstree updated today. I've done the mergemaster bit and readline

Python27 install problem - Undefined symbol rl_callback_sigcleanup

This is a recent 11-STABLE jail but it may contain cruft from a previous 10 (or maybe even earlier) install. Portstree updated today. I've done the mergemaster bit and readline-8.0.0 is present, rl_callback_sigcleanup eists in /usr/local/include/readline/readline.h. Some relevant parts of

Re: sshguard - rc and blacklisting

On 2018-10-16 07:52, Dimitry Andric wrote: On 15 Oct 2018, at 17:16, Per olof Ljungmark wrote: Either I am doing it wrong or sshguard is not properly implemented. 1. In the config file /usr/local/etc/sshguard.conf there is a parameter # Colon-separated blacklist threshold and full path

sshguard - rc and blacklisting

Hello, Either I am doing it wrong or sshguard is not properly implemented. 1. In the config file /usr/local/etc/sshguard.conf there is a parameter # Colon-separated blacklist threshold and full path to blacklist file. # (optional, no default) #BLACKLIST_FILE=120:/var/db/sshguard/blacklist.db

Re: Wrong log and archive permissions in Nagios

Hi, On 9/6/18 12:42 PM, Andrea Venturoli wrote: > Hello. > > I run several instances of Nagios and they all share a problem: reports, > alert histories, notifications, etc... cannot be viewed due to > permission problems. > In fact all the files are owned by nagios and access is denied to user >

Re: Cannot specify ntpd binary in ports with ntpd startup file.

Hi, On 8/29/18 2:34 AM, Dan Mahoney (Gushi) wrote: > 1) Got the version wrong.  I'm on 10.4. > > 2) Forgot a subject.  Whoops. > > 3) Forgot to cc maintainer.  Doh! > > -Dan > > On Tue, 28 Aug 2018, Dan Mahoney (Gushi) wrote: > >> Hey all, >> >> Funny question.  I'm on FreeBSD 11.4, and

Re: www/joomla3 port installs from GitHub, why?

Quoting Larry Rosenman : Because that is the way I inherited it. I may look into changing it, but if you generate a patch, I'll look at it. I have checked over at joomla.org and my view is supported, read https://forum.joomla.org/viewtopic.php?f=706=962183 "I had a read of

Re: www/joomla3 port installs from GitHub, why?

On 05/21/18 01:49, Dan Mahoney (Gushi) wrote: > On Sun, 20 May 2018, Per olof Ljungmark wrote: > >> On 05/20/18 21:15, Eugene Grosbein wrote: >>> 21.05.2018 2:02, Per olof Ljungmark wrote: > >> OK, I'll try to explain a bit more. >> >> Firstly, this por

Re: www/joomla3 port installs from GitHub, why?

On 05/20/18 21:15, Eugene Grosbein wrote: > 21.05.2018 2:02, Per olof Ljungmark wrote: > >>> I may look into changing it, but if you generate a patch, I'll look at it. >> >> Easiest way to understand what I mean is to compare the official download at >> https://d

Re: www/joomla3 port installs from GitHub, why?

Thank you for replying, On 05/20/18 19:39, Larry Rosenman wrote: > Because that is the way I inherited it. > > I may look into changing it, but if you generate a patch, I'll look at it. > > Easiest way to understand what I mean is to compare the official download at

www/joomla3 port installs from GitHub, why?

I am curious as to why the www/joomla3 port installs from GitHub, looks like the port is better for Joomla code development than to run a CMS. There are LOTS of files in the port install that is not needed to run Joomla. I thought the recommended way is to fetch the latest version from

Re: phpLDAPadmin -- is it time to drop this from ports?

On 04/05/18 15:30, Matthew Seaman wrote: > On 05/04/2018 13:35, Per olof Ljungmark wrote: >> >> Quoting Matthew Seaman <matt...@freebsd.org>: >> >>> Dear all, >>> >>> I've maintained the net/phpldapadmin port for _many_ years. >>&

Re: phpLDAPadmin -- is it time to drop this from ports?

On 04/05/18 15:30, Matthew Seaman wrote: > On 05/04/2018 13:35, Per olof Ljungmark wrote: >> >> Quoting Matthew Seaman <matt...@freebsd.org>: >> >>> Dear all, >>> >>> I've maintained the net/phpldapadmin port for _many_ years. >>&

Re: phpLDAPadmin -- is it time to drop this from ports?

Quoting Matthew Seaman : Dear all, I've maintained the net/phpldapadmin port for _many_ years. Unfortunately this project seems to have ceased development upstream. There hasn't been a new release for more than 5 years, nor any sign of life from the original

Re: sysutils/smartmontools error: no member named 'opc_fuse' in 'nvme_command'

Hi, fixed in v.463148, thank you for being quick! On 02/27/18 15:19, Per olof Ljungmark wrote: > FreeBSD 11.1-STABLE #0 r329069 > > Update to 6.6.1 gives, > > c++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' > -DSMARTMONTOOLS

sysutils/smartmontools error: no member named 'opc_fuse' in 'nvme_command'

FreeBSD 11.1-STABLE #0 r329069 Update to 6.6.1 gives, c++ -DHAVE_CONFIG_H -I. -DBUILD_INFO='"(local build)"' -DSMARTMONTOOLS_SYSCONFDIR='"/usr/local/etc"' -DSMARTMONTOOLS_SMARTDSCRIPTDIR='"/usr/local/etc"' -DSMARTMONTOOLS_DRIVEDBDIR='"/usr/local/share/smartmontools"' -O2 -pipe

Re: Cyrus IMAP port version

On 02/13/18 18:06, Per olof Ljungmark wrote: > Good day, > > Happy Cyrus IMAP user here, planning upgrade from 2.5 to 3, just > wondering if there are any imminemt plans to bring the port to latest > (3.0.5) version, that would saves us just a little bit of time. Well, it is

Cyrus IMAP port version

Good day, Happy Cyrus IMAP user here, planning upgrade from 2.5 to 3, just wondering if there are any imminemt plans to bring the port to latest (3.0.5) version, that would saves us just a little bit of time. Thanks! ___ freebsd-ports@freebsd.org

Re: daily security run output and joomla3

On 01/28/18 19:31, Baptiste Daroussin wrote: > On Mon, Jan 29, 2018 at 03:27:22AM +0900, Yasuhiro KIMURA wrote: >> From: Larry Rosenman >> Subject: Re: daily security run output and joomla3 >> Date: Sun, 28 Jan 2018 12:04:56 -0600 >> >>> But as the OP notes, the joomla3

Re: Flavors *COMPLETELY* break the port system (synth and poudriere are useless)

On 12/05/17 23:25, Baho Utot wrote: > Thank you for taking a perfectly good system and breaking it as well as > making it unusable, unstable.  You just don't know of all the countless > hours spent after running an update and taking a week to get it working > again. > > It really helps motivate

Re: OpenLDAP 24 and MemberOf

On 2017-09-19 17:59, Kaya Saman wrote: > Hi, > > I'm trying to install the MemberOf Overlay in the OpenLDAP 24 Server > port but for some reason I don't think it's getting installed?? > > Most likely I'm doing something wrong here but on the port dir: > > /usr/ports/net/openldap24-server > >

Re: FreeBSD Port: void-zones-tools-1.0.2

Hello, On 2017-08-27 00:44, Vidar Karlsen wrote: > >> On 26 Aug 2017, at 23:27, Kevin Oberman wrote: >> >> On Sat, Aug 26, 2017 at 2:10 PM, Ernie Luzar wrote: >> >>> Installed the port today. No manual included or any information about how >>> to use

Re: sshguard 2.0.0

On 2017-07-21 19:49, Per olof Ljungmark wrote: > Hi, > > I am having a bit of a problem to understand how the config works in the > new port. > > We have /usr/local/etc/rc.d/sshguard that includes options for /etc/rc.conf > > We have /usr/local/etc/sshguard

sshguard 2.0.0

Hi, I am having a bit of a problem to understand how the config works in the new port. We have /usr/local/etc/rc.d/sshguard that includes options for /etc/rc.conf We have /usr/local/etc/sshguard.conf If I just set sshguard_enable="YES" in rc.conf and enter the other parameters in the

Re: The future of portmaster [and of ports-mgmt/synth]

On 2017-05-31 02:10, Kevin Oberman wrote: On Tue, May 30, 2017 at 2:53 PM, Mark Linimon <lini...@lonesome.com <mailto:lini...@lonesome.com>> wrote: On Tue, May 30, 2017 at 11:46:46PM +0200, Per olof Ljungmark wrote: > Hello, I have not followed this thread before

Re: The future of portmaster [and of ports-mgmt/synth]

On 2017-05-30 22:06, Mark Linimon wrote: On Tue, May 30, 2017 at 12:00:14PM -0700, Mark Millard wrote: Kevin Oberman rkoberman at gmail.com wrote on Tue May 30 16:52:19 UTC 2017 I really suggest that you look at synth. synth is currently only available for x86 and unless someone steps up to

Re: cyrus-imapd24-2.4.19_1 is marked as broken: Patch is not applicable.

On 2017-05-27 13:56, Herbert J. Skuhra wrote: Per olof Ljungmark skrev: Is a fix for this coming? Thanks, Why are you still using 2.4.x? Thanks. Good question, I will test 2.5 over the weekend and if all fine upgrade. 2.4 still gets support however, upgrading mail servers is not always

cyrus-imapd24-2.4.19_1 is marked as broken: Patch is not applicable.

Is a fix for this coming? Thanks, ___ freebsd-ports@freebsd.org mailing list https://lists.freebsd.org/mailman/listinfo/freebsd-ports To unsubscribe, send any mail to "freebsd-ports-unsubscr...@freebsd.org"

Re: Cyrus IMAP in a jail anyone?

On 2016-12-20 21:45, Per olof Ljungmark wrote: > Hi, > > I'm facing a peculiar problem with two Cyrus instances both running > 11.STABLE jails. Using the sync feature I am able to replicate the > mailboxes but syncing sieve scripts does not work: > > On the sen

Cyrus IMAP in a jail anyone?

Hi, I'm facing a peculiar problem with two Cyrus instances both running 11.STABLE jails. Using the sync feature I am able to replicate the mailboxes but syncing sieve scripts does not work: On the sending side(sync_client): <1482265840https://lists.freebsd.org/mailman/listinfo/freebsd-ports To

Re: openldap 2.4 and ppolicy

On 2016-12-05 11:00, Matthew Seaman wrote: > On 12/05/16 01:55, Per Olof Ljungmark wrote: >> Can someone who implemented ppolicy on FreeBSD please enlighten me on >> how this is done with the cn=config backend? Openldap can be really >> frustrating at times! > > I've d

openldap 2.4 and ppolicy

Can someone who implemented ppolicy on FreeBSD please enlighten me on how this is done with the cn=config backend? Openldap can be really frustrating at times! ___ freebsd-ports@freebsd.org mailing list

Re: failure building Thunderbird: libnss3.so: No such file or directory

On 2016-09-26 09:03, Perry Hutchison wrote: > Per olof Ljungmark <p...@intersonic.se> wrote: > >> '/usr/ports/mail/thunderbird/work/thunderbird-45.3.0' >> ===> Compilation failed unexpectedly. >> Try to set MAKE_JOBS_UNSAFE=yes and reb

Re: failure building Thunderbird: libnss3.so: No such file or directory

Quoting per...@pluto.rain.com: Per olof Ljungmark <p...@intersonic.se> wrote: '/usr/ports/mail/thunderbird/work/thunderbird-45.3.0' ===> Compilation failed unexpectedly. Try to set MAKE_JOBS_UNSAFE=yes and rebuild before reporting th

failure building Thunderbird: libnss3.so: No such file or directory

FreeBSD 10.3-STABLE #0 r306300 GENERIC amd64 gmake[6]: Entering directory '/usr/ports/mail/thunderbird/work/thunderbird-45.3.0/obj-x86_64-unknown-freebsd10.3/mail/components/im' /usr/ports/mail/thunderbird/work/thunderbird-45.3.0/obj-x86_64-unknown-freebsd10.3/_virtualenv/bin/python -m

Re: Thunderbird with Enigmail

On 2016-06-18 16:50, Per olof Ljungmark wrote: > Just checking here if anyone got this combo working, I have identical > setups on Win and Horde Webmail working but on FreeBSD I only see: > > Error - no matching private/secret key found to decrypt message > > gpg: decryption

Thunderbird with Enigmail

Just checking here if anyone got this combo working, I have identical setups on Win and Horde Webmail working but on FreeBSD I only see: Error - no matching private/secret key found to decrypt message gpg: decryption failed: No secret key But there are keys and I can open them in both Enigmail

Re: mail/thunderbird does not build

Quoting Walter Schwarzenfeld : Which options are set in make config? Tried default options and now only x dbus x optimized_cflags x ALSA Also tried an earlier revision from November (pre SoundTouch), but all fails in the same place so the error is most likely

mail/thunderbird does not build

Port revision 405339 INPUT("../../gfx/skia/Unified_cpp_gfx_skia8.o") INPUT("../../gfx/skia/Unified_cpp_gfx_skia9.o") INPUT("StaticXULComponentsEnd/StaticXULComponentsEnd.o") ../../ipc/chromium/process_util_bsd.o: In function

Re: mail/thunderbird does not build

Quoting Walter Schwarzenfeld : The patch is a change in freetype headers - could it be that freetype is not updated? It is, but I feel it is best now to start with updating the base system(s), and then run the ports update. Base was from mid-September so it's

Re: mail/thunderbird does not build

Quoting Walter Schwarzenfeld : Do you have the patch in the files directory of the port ? If not you may try to copy it in the directory. But I would mail directly to the maintainer. Tried again, now with BOTH alsa AND pulseaudio ticked, this worked! Anyone knows

Re: mail/thunderbird does not build

Quoting Per olof Ljungmark <p...@intersonic.se>: Quoting Walter Schwarzenfeld <w.schwarzenf...@utanet.at>: The patch is a change in freetype headers - could it be that freetype is not updated? It is, but I feel it is best now to start with updating the base system(s),

Re: Failed upgrade graphics/ImageMagick: /usr/bin/ld: skipping incompatible /usr/lib32/...

On 2015-12-23 14:14, David Wolfskill wrote: > Today's daily stable/10 laptop update was from: > > FreeBSD g1-252.catwhisker.org 10.2-STABLE FreeBSD 10.2-STABLE #235 > r292590M/292594:1002504: Tue Dec 22 04:31:23 PST 2015 > r...@g1-252.catwhisker.org:/common/S1/obj/usr/src/sys/CANARY

Re: HELP: Bacula compile with older version installed

On 2015-10-10 01:19, Larry Rosenman wrote: > Related to BZ# 193641, the new 7.2.0 bacula port doesn't link if the > 7.0.5 packages are installed. > > we get: > ==>Entering directory > /var/ports/basejail/usr/ports/sysutils/bacula-server/work/bacula-7.2.0/src/dird > > --- bacula-dir --- > Linking

Re: libreoffice 5 works and does not

On 2015-10-04 17:13, Per olof Ljungmark wrote: > > Hi all, > > I have a problem with latest libreoffice (us version) on recent > FreeBSD-STABLE. > > On two almost identical setups, one at work and one at home, the former > have no problem with LO but the latter has. >

libreoffice 5 works and does not

Hi all, I have a problem with latest libreoffice (us version) on recent FreeBSD-STABLE. On two almost identical setups, one at work and one at home, the former have no problem with LO but the latter has. - I can open documents but the menu looks strange with thin white text against a black

Re: Icinga Web 2

On 2015-07-30 17:58, Per olof Ljungmark wrote: On 2015-07-30 15:35, Lars Engels wrote: On Thu, Jul 30, 2015 at 10:48:44AM +0200, Kurt Jaeger wrote: Hi! We are deploying a new monitoring host and testing Icinga2, so far it looks good. Although Icinga Web 2 is not yet production ready I

Icinga Web 2

Hi, We are deploying a new monitoring host and testing Icinga2, so far it looks good. Although Icinga Web 2 is not yet production ready I would like to know if there are plans to make a port for it in due time? I am trying it out now and apart from changing a myriad of paths it should not be

Re: Icinga Web 2

On 2015-07-30 15:35, Lars Engels wrote: On Thu, Jul 30, 2015 at 10:48:44AM +0200, Kurt Jaeger wrote: Hi! We are deploying a new monitoring host and testing Icinga2, so far it looks good. Although Icinga Web 2 is not yet production ready I would like to know if there are plans to make a

Re: Build Failure: webkit-gtk2

On 2015-01-12 15:02, Jerry wrote: FreeBSD 10.1 amd64 Is anyone besides me having a problem building webkit-gtk2? It fails with this error message: CXXLDlibWTF.la CXXLDPrograms/LLIntOffsetsExtractor /usr/bin/ld:./.libs/libWTF.a: file format not recognized; treating as linker

Re: cannot build www/webkit-gtk2 (Per olof Ljungmark)

On 2015-01-05 22:03, David Wolfskill wrote: On Mon, Jan 05, 2015 at 10:00:27PM +0100, Per olof Ljungmark wrote: ... Thank for the tip, unfortunately it built fine but then this happened, I had not selected audio but apparently something thought I had. Did you select with or without audio

Re: cannot build www/webkit-gtk2 (Per olof Ljungmark)

On 2015-01-05 20:57, David Wolfskill wrote: On Mon, Jan 05, 2015 at 10:04:10PM +0530, Amit Sengupta wrote: I spent 3-4 days trying to build the webkit-gtk2 port on 10.1 RELEASE. I kept getting a linker error and I tried every solution I could find about it, including trying to change the

cannot build www/webkit-gtk2

Happy New Year! on 9.3-STABLE Tried patch from bugzilla (for gtk3) 195500 but no change. CXX DerivedSources/JavaScriptCore/libjavascriptcoregtk_1_0_la-InspectorJSTypeBuilders.lo CXXLDlibjavascriptcoregtk-1.0.la CXXLDlibwebkitgtk-1.0.la CXXLDPrograms/jsc-1 CCLD

installs files into the same place

... is now all over the place. If I rm -rf /usr/local/* and /usr/ports/* and start from scratch to install a desktop with currently 1036 ports would that help? Other suggestions welcome... starting to feel a bit desperate now. Thanks, //per ___

Re: installs files into the same place

On 11/29/14 19:17, Kurt Jaeger wrote: Hi! ... is now all over the place. If I rm -rf /usr/local/* and /usr/ports/* and start from scratch to install a desktop with currently 1036 ports would that help? Yes. Other suggestions welcome... starting to feel a bit desperate now. Yes,

stopped in /usr/ports/net-mgmt/nagios-plugins: Permission denied

FreeBSD 10.1-BETA2 GENERIC amd64 Building nrpe gmake[7]: Entering directory `/usr/ports/net-mgmt/nagios-plugins/work/nagios-plugins-2.0.3/plugins-root' install -s -o root -g wheel -m 555 check_dhcp /usr/ports/net-mgmt/nagios-plugins/work/stage/usr/local/libexec/nagios/check_dhcp true

Re: stopped in /usr/ports/net-mgmt/nagios-plugins: Permission denied

On 09/23/14 21:00, Per olof Ljungmark wrote: FreeBSD 10.1-BETA2 GENERIC amd64 Building nrpe gmake[7]: Entering directory `/usr/ports/net-mgmt/nagios-plugins/work/nagios-plugins-2.0.3/plugins-root' install -s -o root -g wheel -m 555 check_dhcp /usr/ports/net-mgmt/nagios-plugins/work

www/horde does not run on 10-STABLE - Fatal Error: Could not pack data

Sorry for the cross-post but this is a bit out of the ordinary for me. In short, no matter how I try varoius changes, I am unable to run www/horde-base under latest 10-STABLE. The error is: HORDE: Could not pack data. [pid 80949 on line 154 of /usr/local/share/pear/Horde/Pack.php] From what I

Re: www/horde does not run on 10-STABLE - Fatal Error: Could not pack data

On 09/01/14 23:44, Steven Hartland wrote: Have you made sure you have rebuilt all php libs? Yes, twice, portmaster -fa Also, a fresh install of 10-STABLE yielded same result as upgrading 9. - Original Message - From: Per olof Ljungmark p...@intersonic.se To: po...@freebsd.org Cc

cannot build pecl-pdflib

10-PRERELEASE fresh portstree # make === License PHP30 accepted by the user === pecl-pdflib-3.0.4 depends on file: /usr/local/sbin/pkg - found === Fetching all distfiles required by pecl-pdflib-3.0.4 for building === Extracting for pecl-pdflib-3.0.4 = SHA256 Checksum mismatch for

Re: cannot build pecl-pdflib

On 08/31/14 21:16, Per olof Ljungmark wrote: 10-PRERELEASE fresh portstree # make === License PHP30 accepted by the user === pecl-pdflib-3.0.4 depends on file: /usr/local/sbin/pkg - found === Fetching all distfiles required by pecl-pdflib-3.0.4 for building === Extracting for pecl

Re: cannot build pecl-pdflib

was down (database error) at the very moment I was building the port and the package from distcache.FreeBSD.org did not work. Now that pecl.php.net is up again it builds fine. Perhaps the distfile at freebsd.org needs to be checked. On 31/08/2014 20:16, Per olof Ljungmark wrote: 10-PRERELEASE

Re: archivers/rpm fails to build probably due to my local issue

On 2014-05-14 08:08, Koichiro IWAO wrote: I still fails to build today but thanks. I will look for my envitonment again. On Fri, May 09, 2014 at 11:58:12AM +0200, Alex Dupre wrote: Koichiro IWAO ha scritto: archivers/rpm fails to build around aclocal macro. Same issue yesterday, today it

nagios-pf-plugin

This port is marked DEPRECATED === No more public distfiles but aren't https://github.com/kian/nagios-pf-plugin/blob/master/check_pf.c a source for the distfile? Cheers, ___ freebsd-ports@freebsd.org mailing list

db4* This port is marked DEPRECATED

Hello list, Before I go ahead and replace db4* with db5* everywhere, are there any caveats to it? I saw no notes in UPDATING but perhaps I missed it? I suppose it should be as easy as shutting down the running application, upgrade and start again? Don't want to shoot myself in foot for the nth.

Re: db4* This port is marked DEPRECATED

On 2013-12-14 18:33, l...@lena.kiev.ua wrote: portupgrade uses db41. Should portupgrade be rebuilt with db5 ? How? https://wiki.freebsd.org/Ports/BerkeleyDBCleanup ___ freebsd-ports@freebsd.org mailing list

pysolfc dumps core

In the hope of replacing the card game that existed with KDE3 I tried pysol and pysolfc from ports, however, neither of them would run on my 9-STABLE r256301 system. Hints welcome, either fixes or an alternative to pysol. boost-python-libs-1.52.0 python-2.7_1,2 python2-2_1 python27-2.7.5_3

KDE3 apps replacements?

Hi, I am finally in the process of removing KDE3 completely, switched to Xfce some time ago, and wonder if any of you could recommend suitable replacements for some of the apps: kpdfpdf viewer with the ability to copy text from kWrite simple text editor with some filetype

Re: KDE3 apps replacements?

Quoting Thomas Mueller mueller6...@bellsouth.net: from Per olof Ljungmark: I am finally in the process of removing KDE3 completely, switched to Xfce some time ago, and wonder if any of you could recommend suitable replacements for some of the apps: kpdfpdf viewer

Re: KDE3 apps replacements?

Quoting Thomas Mueller mueller6...@bellsouth.net: from Per olof Ljungmark: I am finally in the process of removing KDE3 completely, switched to Xfce some time ago, and wonder if any of you could recommend suitable replacements for some of the apps: kpdfpdf viewer

mailman: IOError: [Errno 13] Permission denied

Hi, Since a few weeks (sorry, cannot recall exact date), we get the below errors whenever cron is run for mailman. There was no change in configuration at that time and I am pretty sure the errors started after an update run. The lists are all ok and bin/check_perms No problems found The errors

perl-5.12.5 This port is marked DEPRECATED

OK, fine. And what should we replace it with on a production 9.2-PRERELEASE? 5.14? 5.16? 5.,18? Which would be least painful? Thanks for any input. //per ___ freebsd-ports@freebsd.org mailing list

Re: kde3 ports expired today

On 2013-07-02 18:31, Daniel Nebdal wrote: On Tue, Jul 2, 2013 at 5:55 PM, Jim Pingle li...@pingle.org wrote: On 07/02/13 07:10, Matthias Apitz wrote: El día Monday, July 01, 2013 a las 08:05:37PM -0700, Jeffrey Bouquet escribió: bsdstats.org ports stats would have that information probably

Re: kde3 ports expired today

On 2013-07-01 11:38, Baptiste Daroussin wrote: On Mon, Jul 01, 2013 at 10:20:22AM +0200, Matthias Apitz wrote: El día Monday, July 01, 2013 a las 09:59:48AM +0200, René Ladan escribió: Hi, the KDE3 ports (263 of them) expired today. They were marked for removal since December 30, so the

  1   2   >