Re: Promise Fastrak ATA RAID 1 rebuild failed

2004-02-11 Thread Chad Leigh -- Shire.Net LLC
On Feb 10, 2004, at 11:39 PM, Michael Shafae wrote: Hi, I have an intel motherboard, s845wd1, with an onboard Promise Fastrak ATA RAID. Its running 4.8p10 on two mirrored Seagate 80 GB disks. It lost the mirror reporting this: ad6: hard error reading fsbn 140018943 of 0-127 (ad6 bn 140018943;

What settings are you using in /etc/make.conf?

2004-02-11 Thread Bryan Cassidy
Just wondering if people wouldn't mind sharring their /etc/make.conf settings with others. Here's mine: CPUTYPE?=p3 CFLAGS= -O -pipe CXXFLAGS+= -fmemoize-lookups -fsave-memoized NOPROFILE= true USA_RESIDENT= yes SUP=/usr/local/bin/cvsup SUPFLAGS= -g -L 2 SUPHOST=

Re: 5.2 install hangs after menu -- USB ISSUES

2004-02-11 Thread Dimitri Aivaliotis
On Wed, 11 Feb 2004 10:19:11 +0800 Kathy Quinlan [EMAIL PROTECTED] wrote: OK this was all a red herring :o( The fault turned out to be that in BIOS I had USB support for legacy KBD/MOUSE/FDD enabled. Then the installer hung while I had an ATMEL USB development board plugged in, and

ipnat transparent www proxy question

2004-02-11 Thread Markus Kovero
I would like to do transparent www proxy for nat-network which is 172.16.0.0/24 and wwwproxy being $ispcache I told ipnat to do: rdr xl0 from 172.16.0.0/24 to any port = 80 - $ispcache port 8080 tcp but all www connections go straight through, not through cache. xl0 is LAN interface. Any clue?

DVD playback finally works! =)

2004-02-11 Thread Benjamin Walkenhorst
Hello everyone, When I recently switched from Slackware 9.1 to FreeBSD 5.2, one of the few things that didn't work right away was DVD-playback. Now it works, I just have to chmod /dev/acd0 to 666 and create a symlink to /dev/dvd. Contrary to what I've read so far, DVD playback even works with

redundancy with freebsd.

2004-02-11 Thread Mipam
Hi, I wish to run freebsd on some servers (hp blade servers). Each server will be supplied with two nic's, both will have the same ip and network mask. like this: switch | | | freebsd |

X dies after portupgrade (5.2)

2004-02-11 Thread a
Hi, After doing a complete portupgrade as of yesterday (Feb 10, 2004) (cvsup ports-supfile, pkgdb -F, portsdb -Uu, portupgrade -arR) for my 5.2 System X dies upon startup with error messages like (EE) RADEON(0): [dri] RADEONInitVisualConfigs failed (depth 8 not supported). Disabling DRI.

kernel

2004-02-11 Thread molj
this is my custim kernel. it stops by make-ing it, it tells me that it has problems with some isa drivers, how can it be if they are disabled? heeelpp please!! have a nice day matey # # GENERIC -- Generic kernel configuration file for FreeBSD/i386 # # For more information on this file, please

Re: DVD playback finally works! =)

2004-02-11 Thread Antoine Jacoutot
On Wednesday 11 February 2004 09:55, Benjamin Walkenhorst wrote: Unfortunately, due to devfs, I have to change the permissions for acd0 and create the link (/dev/dvd) every time the system starts up - is there any way to make these changes permanent? Yes there is. -- man devfs -- edit

Re: MASTER_SITE_OVERRIDE make.conf variables in 5.x ?

2004-02-11 Thread Kris Kennaway
On Wed, Feb 11, 2004 at 08:22:42AM +0200, Nelis Lamprecht wrote: Hi, In 4.x you can use variables such as MASTER_SITE_OVERRIDE to add in your local mirrors for the distribution files. Where in 5.x do you put these ? I copied my usual make.conf settings across to a 5.x machine and it doesn't

Re: kernel

2004-02-11 Thread Kris Kennaway
On Wed, Feb 11, 2004 at 11:08:51AM +0100, molj wrote: this is my custim kernel. it stops by make-ing it, it tells me that it has problems with some isa drivers, how can it be if they are disabled? heeelpp please!! Please post the errors too. Note that you have commented out ISA bus support,

Re: DVD playback finally works! =)

2004-02-11 Thread Benjamin Walkenhorst
On Wed, 11 Feb 2004 11:15:47 +0100 Antoine Jacoutot [EMAIL PROTECTED] wrote: On Wednesday 11 February 2004 09:55, Benjamin Walkenhorst wrote: Unfortunately, due to devfs, I have to change the permissions for acd0 and create the link (/dev/dvd) every time the system starts up - is there any

Re: How to safely merge two slices on harddisk?

2004-02-11 Thread Rob
Malcolm Kay wrote: On Tue, 10 Feb 2004 04:19, Rob wrote: Malcolm, Thank you for your detailed answer to my question. Malcolm Kay wrote: On Mon, 9 Feb 2004 13:46, Rob wrote: Do not change the offset of 'f'. If 'g' does not physically follow 'f' on the disk then this is not going to work

Re: Newbie Upgrading 4.8 - 5.2, filesystem full

2004-02-11 Thread Jez Hancock
On Wed, Feb 11, 2004 at 08:16:30AM +1100, richard wrote: Migrating data will be problematic as there's lot of user cr*p and custom built web apps from generations of cowboy programmers, plus about 300 users and a couple of dozen virtual domains. As I'm really only after a stable

KERNEL PROB

2004-02-11 Thread molj
t-extensions -std=c99 -nostdinc -I- -I. -I/usr/src/sys -I/usr/src/sys/dev -I/usr/src/sys/contrib/dev/acpica -I/usr/src/sys/contrib/ipfilter -D_KERNEL -include opt_global.h -fno-common -mno-align-long-strings -mpreferred-stack-boundary=2 -ffreestanding -Werror /usr/src/sys/i386/isa/npx.c

RE: Newbie Upgrading 4.8 - 5.2, filesystem full

2004-02-11 Thread richard
I moved all the mail files to /usr/mail and sym-linked it to /var/mail. No problems with space. I've given up on the 5.2 upgrade, now I'm trying a 4.8 - 4.9 upgrade and the first attempt failed with an odd message - Couldn't even extract the bin distribution, consider this upgrade a failure.

Re: KERNEL PROB

2004-02-11 Thread Kris Kennaway
On Wed, Feb 11, 2004 at 12:03:39PM +0100, molj wrote: t-extensions -std=c99 -nostdinc -I- -I. -I/usr/src/sys -I/usr/src/sys/dev -I/usr/src/sys/contrib/dev/acpica -I/usr/src/sys/contrib/ipfilter -D_KERNEL -include opt_global.h -fno-common -mno-align-long-strings

RE: rc.conf

2004-02-11 Thread Leon Verheem
in /etc/ run ./netstart -Original Message- From: DerAlSem [mailto:[EMAIL PROTECTED] Sent: 11 February 2004 01:16 PM To: [EMAIL PROTECTED] Subject: rc.conf Hello freebsd-newbies, I've made some changes to rc.conf. Is there a way to apply them without rebooting entire system? (i've

Re: How to safely merge two slices on harddisk?

2004-02-11 Thread Malcolm Kay
On Wed, 11 Feb 2004 21:15, Rob wrote: Malcolm Kay wrote: On Tue, 10 Feb 2004 04:19, Rob wrote: Malcolm, Thank you for your detailed answer to my question. Malcolm Kay wrote: On Mon, 9 Feb 2004 13:46, Rob wrote: Do not change the offset of 'f'. If 'g' does not physically follow

SMBFS VFS.USEROMUNT BUG OR MY STUPIDITY?

2004-02-11 Thread Edd Barrett
Hi there. I think i may have discovered a bug in free bsd 5.2-RELEASE, it may be in earlier versions too, but I have not tried it (maybe someone running 4.x could try it) I have made an fstab entry and nsmbrc file for a smb share. vfs.usermount is set to 1. A normal user (me in this case (edd))

FreeBSD has Two Firewalls?

2004-02-11 Thread Loren M. Lang
I'm trying to learn how to configure my firewall on FreeBSD and there seems to be quite a few commands related to it. It looks like, though, that FreeBSD has two different implentations of firewalls. One uses ipfw to configure it and has natd for nat, the other uses ipf and has ipmon, ipnat,

RE: Re[2]: rc.conf

2004-02-11 Thread Leon Verheem
Are you ssh'ing into the system in conjunction with running DHCP? I know netstart sometimes doesn't like DHCP. If not then something might be physically wrong with the hardware -Original Message- From: DerAlSem [mailto:[EMAIL PROTECTED] Sent: 11 February 2004 02:30 PM To: Leon Verheem

Refreshing ports

2004-02-11 Thread Robert Golovniov
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hello, I was trying to CVSup my ports to the latest 5.2 Release version, but instead of updating the tree I just removed all the files except README.html in each folder. Moreover, my base folder disappeared. Can anybody check my

Trend FileScan for Linux

2004-02-11 Thread Robert Golovniov
Hello, Has anybody tried installing on FreeBSD Trend FileScan for Linux? -- -=Robert Beata Golovniov | Lviv, Ukraine=- ~~ mailto:[EMAIL PROTECTED]Body=Embedded%20key

Shutdown problem

2004-02-11 Thread Vladimir Yourtaev
Hello guys. Help me resolve problem. My computer has ATX power unit. In BIOS ACPI i turned on. In the rc.conf apm_enable=YES apmd_enable=YES When i invoke comand shutdown -p now or halt -p, my computer doesn't switch off and says: press any button to reboot. How i can switch off it. --

kdelibs3 configure script reports LibXext error

2004-02-11 Thread Ole Voß
I'm trying to install the KDE3 which came with freeBSD 4.9 from ports. Unfortunately the installation fails while installing the kdelibs3 with the following error: - checking for libXext... no configure: error: We need a working libXext to proceed. Since configure

Re: Refreshing ports

2004-02-11 Thread Lowell Gilbert
Robert Golovniov [EMAIL PROTECTED] writes: I was trying to CVSup my ports to the latest 5.2 Release version, but instead of updating the tree I just removed all the files except README.html in each folder. Moreover, my base folder disappeared. Can anybody check my ports-supfile

Re: FreeBSD has Two Firewalls?

2004-02-11 Thread Lowell Gilbert
Loren M. Lang [EMAIL PROTECTED] writes: I'm trying to learn how to configure my firewall on FreeBSD and there seems to be quite a few commands related to it. It looks like, though, that FreeBSD has two different implentations of firewalls. One uses ipfw to configure it and has natd for nat,

sendmail confi help

2004-02-11 Thread stan
How can I configure FreeBSD's default sendmail to work like this: If the message is for domain1 or domain2, deliver directly. If not, use a smarthost ? I can amke the smarthost work, but then it wnats to send _all_ mail there. -- They that would give up essential liberty for temporary safety

Re: Shutdown problem

2004-02-11 Thread Lowell Gilbert
Vladimir Yourtaev [EMAIL PROTECTED] writes: Help me resolve problem. My computer has ATX power unit. In BIOS ACPI i turned on. In the rc.conf apm_enable=YES apmd_enable=YES When i invoke comand shutdown -p now or halt -p, my computer doesn't switch off and says: press any button to

Re: Trend FileScan for Linux

2004-02-11 Thread Loren M. Lang
On Wed, Feb 11, 2004 at 03:27:34PM +0200, Robert Golovniov wrote: Hello, Has anybody tried installing on FreeBSD Trend FileScan for Linux? I've tried installing Trend Micro InterScan for Linux, but it was unsuccessful, mainly the problem was the install script they provided. It was written

Re: py-wxPython compilation error

2004-02-11 Thread Jason Stewart
On 10/02/04 21:24 -0500, Tsu-Fan Cheng wrote: Hi freebsd, I have a problem in compiling x11-toolkit/py-wxPython from ports, the output are follows: snip Did you try updating your ports collection before making the toolkit? ___ [EMAIL PROTECTED]

Re: FreeBSD has Two Firewalls?

2004-02-11 Thread Loren M. Lang
On Wed, Feb 11, 2004 at 08:43:26AM -0500, Lowell Gilbert wrote: Loren M. Lang [EMAIL PROTECTED] writes: I'm trying to learn how to configure my firewall on FreeBSD and there seems to be quite a few commands related to it. It looks like, though, that FreeBSD has two different

Re: py-wxPython compilation error

2004-02-11 Thread Tsu-Fan Cheng
Hi, thanks for the reply. I think I updated the port a few days ago, but I will do that again just in case. Best Regards, :-) Tsu-Fan Cheng [] (BIG5) SUNY at Stony Brook Stony Brook, NY, 11794 We are luckier than we think! On Wed, 11 Feb 2004, Jason Stewart wrote: On 10/02/04 21:24 -0500,

RE: kernel

2004-02-11 Thread Michael Clark
Isn't ISA Support almost always needed on i386?? I thought some non ISA devices actually make use of this... -Original Message- From: Kris Kennaway [mailto:[EMAIL PROTECTED] Sent: Wednesday, February 11, 2004 4:23 AM To: molj Cc: [EMAIL PROTECTED] Subject: Re: kernel On Wed, Feb 11,

Graphical FTP client from command line

2004-02-11 Thread JJB
FBSD Friends On my gateway server I do not run X. Looking for recommendation on command line Graphical FTP client. Something with directory tree to select the 'from' and 'to' locations. Are there any? Thanks ___ [EMAIL PROTECTED] mailing list

Re: Graphical FTP client from command line

2004-02-11 Thread Chris
On Wednesday 11 February 2004 08:12 am, JJB wrote: FBSD Friends On my gateway server I do not run X. Looking for recommendation on command line Graphical FTP client. Something with directory tree to select the 'from' and 'to' locations. Are there any? Thanks Ncftp will do well for you.

Re: ipnat transparent www proxy question

2004-02-11 Thread Nathan Kinkade
On Wed, Feb 11, 2004 at 11:21:36AM +0200, Markus Kovero wrote: I would like to do transparent www proxy for nat-network which is 172.16.0.0/24 and wwwproxy being $ispcache I told ipnat to do: rdr xl0 from 172.16.0.0/24 to any port = 80 - $ispcache port 8080 tcp but all www connections go

Re: X dies after portupgrade (5.2)

2004-02-11 Thread a
On Wed, Feb 11, 2004 at 11:05:08AM +0100, [EMAIL PROTECTED] wrote: Hi, After doing a complete portupgrade as of yesterday (Feb 10, 2004) (cvsup ports-supfile, pkgdb -F, portsdb -Uu, portupgrade -arR) for my 5.2 System X dies upon startup with error messages like I finally found the cause

very long connection times

2004-02-11 Thread Igor Zbirka
I would like to ask you for some advice. I'm using free BSD server in my local network as a rooter. Connection to internet is done over ISDN. During last months our connection time became rapidly too big. There were several connections over 12 hours and sometimes over the night I can see that

RE: Graphical FTP client from command line

2004-02-11 Thread JJB
All ready tried that one. It does not have any directory tree display, or is there some command to bring it up that I missed? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Chris Sent: Wednesday, February 11, 2004 9:17 AM To: [EMAIL PROTECTED]; [EMAIL

xdm

2004-02-11 Thread Christer Solskogen
Is it possible to configure XDM so it wont run localy? like, X does not start on the machine running it. -- Med vennlig hilsen / Best regards Christer Solskogen http://dtz.cjb.net - http://carebears.mine.nu Cheap, but not as cheap as your girlfriend! -Spider Jerusalem

Re: kdelibs3 configure script reports LibXext error

2004-02-11 Thread Joey Mingrone
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 locate libXext gives: /usr/X11R6/lib/libXext.a /usr/X11R6/lib/libXext.so /usr/X11R6/lib/libXext.so.6 /usr/compat/linux/usr/X11R6/lib/libXext.so.6 /usr/compat/linux/usr/X11R6/lib/libXext.so.6.4 /usr/ports/x11/libXext /usr/ports/x11/libXext/Makefile

Re: xdm

2004-02-11 Thread Albert Shih
Le 11/02/2004 à 15:51:55+0100, Christer Solskogen a écrit Is it possible to configure XDM so it wont run localy? like, X does not start on the machine running it. Modify the file /usr/X11R6/lib/X11/xdm/Xservers and make comment the line #:0 local /usr/X11R6/bin/X Regards. --

Re: kdelibs3 configure script reports LibXext error

2004-02-11 Thread Ole Voß
locate libXext gives: /usr/X11R6/lib/libXext.a /usr/X11R6/lib/libXext.so /usr/X11R6/lib/libXext.so.6 /usr/compat/linux/usr/X11R6/lib/libXext.so.6 /usr/compat/linux/usr/X11R6/lib/libXext.so.6.4 /usr/ports/x11/libXext /usr/ports/x11/libXext/Makefile /usr/ports/x11/libXext/distinfo

RE ver. 5.2

2004-02-11 Thread Adrian Saidac
FreeBSD 5.2 stable Recompile the kernel - errors in supporting .c files (missing) @ the make time Is this a full distro? Did not have any problems with 5.1 (BTW 5.2 is been installed as new) Anybody? Thanks -- Adrian Saidac - Systems Support Engineer Sun Microsystems

Re: How to safely merge two slices on harddisk?

2004-02-11 Thread Jerry McAllister
Malcolm Kay wrote: On Tue, 10 Feb 2004 04:19, Rob wrote: Malcolm, Thank you for your detailed answer to my question. Malcolm Kay wrote: On Mon, 9 Feb 2004 13:46, Rob wrote: Do not change the offset of 'f'. If 'g' does not physically follow 'f' on the disk then this is

Re: very long connection times

2004-02-11 Thread Dan Pelleg
Igor Zbirka [EMAIL PROTECTED] writes: I would like to ask you for some advice. I'm using free BSD server in my local network as a rooter. Connection to internet is done over ISDN. During last months our connection time became rapidly too big. There were several connections over 12 hours

Looking for a supplier in Panama, SA ... (ASUS, Tyan, Supermicro)

2004-02-11 Thread Marc G. Fournier
Need to setup some servers in Panama, and *really* hate to have to ship them in if I can spec them out locally ... i know Dell is down there, but at almost 2x the cost of what I've costed out in ASUS/Tyan stuff, I'd like to avoid them with the proverbial ten foot pole ... Servers are all running

Apache 2 on 5.2

2004-02-11 Thread Albert Shih
Hi When you install (for production) apache 2 on FreeBSD 5.2 (I known it's not recommande to use in production) do you active the WITH_THREADS option and it you do what you use option for WITH_CUSTOM_THREADS Well maybe my first question : With the THREADS the performance is really increase ?

Re: A little mail(1) and sylpheed-claws problem - standard ?

2004-02-11 Thread Ion-Mihai Tetcu
On Wed, 11 Feb 2004 16:05:17 +0200 Ion-Mihai Tetcu [EMAIL PROTECTED] wrote: Hi, Could someone who know this better tell me if the ``Status:'' header mail(1) and nail(1) are adding are documented in some standard ? Sylpheed-claws chokes on this, not parsing the headers right. This is an

inbound http authentication proxy

2004-02-11 Thread jr315
building a FreeBSD email-gateway/proxy server. need to filter inbound mail and http/webmail requests for an exchange server. need to find good http authentication proxy for server running IIS. need proxy package that will authenticate inbound http sessions and forward them to the IIS/exchange

Re: sendmail to a smarthost?

2004-02-11 Thread Alex de Kruijff
On Mon, Feb 09, 2004 at 11:56:53AM +0800, Zhang Weiwu wrote: Alex de Kruijff wrote: On Sun, Feb 08, 2004 at 09:31:10PM +0800, Zhang Weiwu wrote: Hello. In my LAN the DNS server is my ADSL modem ... small device that cannot do MX type of address lookup. I wish to configure a fax server

Re: portinstall inn

2004-02-11 Thread dick hoogendijk
On 10 Feb 2004 09:23:33 -0500 Lowell Gilbert [EMAIL PROTECTED] wrote: dick hoogendijk [EMAIL PROTECTED] writes: I wanted to portinstall inn nbut get a refusal stating: changing ownership of system directories Now I do understand that this changing happening is bad. But what if I want the

Re: Can't start rshd

2004-02-11 Thread Daniela
On Tuesday 10 February 2004 01:17, Lowell Gilbert wrote: Daniela [EMAIL PROTECTED] writes: On Monday 09 February 2004 14:43, Lowell Gilbert wrote: Daniela [EMAIL PROTECTED] writes: I'm having problems starting rshd. I tried it on two different computers (yes, I know about the

Re: Cannot ssh from FreeBSD to Linux

2004-02-11 Thread P.V.N
Yes, it hangs like a DNS issue. And I cannot ping either machine from the other. Cannot ping deb from bsd or bsd from deb. However, I can ssh to each machine, seperately, from anywhere. thanks - Original Message - From: matthew [EMAIL PROTECTED] To: P.V.N [EMAIL PROTECTED] Sent:

Re: Graphical FTP client from command line

2004-02-11 Thread Peder Blom
On Wed, 11 Feb 2004 09:12:17 -0500 JJB [EMAIL PROTECTED] wrote: FBSD Friends On my gateway server I do not run X. Looking for recommendation on command line Graphical FTP client. Something with directory tree to select the 'from' and 'to' locations. Are there any? Thanks

RE: Graphical FTP client from command line

2004-02-11 Thread JJB
Yes mc does show graphical directory tree for the local HD, but it has no way to be used from within FTP so both local and remote sides can be navigated. Maybe graphical directory tree is bad selection of words. Restated as FTP client that presents an local and remote windows that can be

System lockups

2004-02-11 Thread Reuben A. Popp
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Morning all :) I've been experiencing some severe system freezes lately, and I wanted to see if anyone might be able to offer any clues/advice on what I might be able to do. The box in question is my main workstation as well as ftp/mail server,

Re: Graphical FTP client from command line

2004-02-11 Thread Dan Nelson
In the last episode (Feb 11), JJB said: Yes mc does show graphical directory tree for the local HD, but it has no way to be used from within FTP so both local and remote sides can be navigated. Have you tried to cd to an ftp url (like ftp://ftp.freebsd.org/pub/FreeBSD ) from within mc? It

Re: Shutdown problem

2004-02-11 Thread Lowell Gilbert
Vladimir Yourtaev [EMAIL PROTECTED] writes: On Wednesday 11 February 2004 15:55, you wrote: Vladimir Yourtaev [EMAIL PROTECTED] writes: Help me resolve problem. My computer has ATX power unit. In BIOS ACPI i turned on. In the rc.conf apm_enable=YES apmd_enable=YES When i

Re: Shutdown problem

2004-02-11 Thread Lowell Gilbert
Robert Golovniov [EMAIL PROTECTED] writes: On Wednesday, February 11, 2004, 3:55:21 PM, Lowell Gilbert wrote: LG Assuming you're running FreeBSD 4.9 (you didn't specify): LG you need to enable the apm device in your kernel. What about 5.2? ACPI.

wiping a partition

2004-02-11 Thread Robert Huff
I've gotten into a wierd situation where the best course seems to be wipe a (BSD) partition - without chnaging the size or location - and then restoring from backup. Based on the Handbook (sec. 12.3.2) the correct would seem to be: make backup cd / dd

samba copy issue

2004-02-11 Thread Brian H
I am trying to copy the /usr/ports tree to windows 2000 share that is mounted with samba in /mnt. When I try to copy the files 'cp -R /usr/ports/* /tmp' I get errors: cp: /mnt/lang/ocaml/files/patch-camlp4-ocaml_src-lib::Makefile: No such file or directory cp:

RE: Graphical FTP client from command line

2004-02-11 Thread JJB
How about some details about how do that. Can you use mc to navigate the remote FTP server to find what you are looking for? Maybe graphical directory tree is bad selection of words. Restated as FTP client that presents an local and remote windows that can be individually navigated to specify

Re: samba copy issue

2004-02-11 Thread Marty Landman
At 12:29 PM 2/11/2004, you wrote: When I try to copy the files 'cp -R /usr/ports/* /tmp' I get errors: cp: /mnt/lang/ocaml/files/patch-camlp4-ocaml_src-lib::Makefile: No such file or directory Brian, If that's the real name of the file then it is an invalid file name on windows because of the

Porstdb -uU Continues to Fail?

2004-02-11 Thread Bob Perry
Hello, I run FreeBSD 4.8 RELEASE-p13 0#. Just ran: /usr/local/bin/cvsup -g -L 2 -z /etc/cvsupfile /usr/local/sbin/portsdb -uU CVSup ran successfully but portsdb -uU seemed to have a problem. Following is the output: Updating the ports index ... Generating INDEX.tmp - please wait.. ===

Re: Graphical FTP client from command line

2004-02-11 Thread Peder Blom
On Wed, 11 Feb 2004 11:51:47 -0500 JJB [EMAIL PROTECTED] wrote: Yes mc does show graphical directory tree for the local HD, but it has no way to be used from within FTP so both local and remote sides can be navigated. Maybe graphical directory tree is bad selection of words. Restated as

Re: kernel

2004-02-11 Thread Kris Kennaway
On Wed, Feb 11, 2004 at 08:10:45AM -0600, Michael Clark wrote: Isn't ISA Support almost always needed on i386?? I thought some non ISA devices actually make use of this... That was my first guess, but the immediate problem is what I said below. Kris P.S. Please don't top-post. pgp0.pgp

Re: RE ver. 5.2

2004-02-11 Thread Kris Kennaway
On Wed, Feb 11, 2004 at 10:13:28AM -0500, Adrian Saidac wrote: FreeBSD 5.2 stable Recompile the kernel - errors in supporting .c files (missing) @ the make time Is this a full distro? FreeBSD 5.2 is a complete operating system (full distro), but whether or not you have installed the complete

Re: portinstall inn

2004-02-11 Thread Kris Kennaway
On Wed, Feb 11, 2004 at 05:23:59PM +0100, dick hoogendijk wrote: Okay, here's my script file: Script started on Wed Feb 11 17:17:32 2004 pooh# portinstall inn ** 'news/inn' is marked as IGNORE: is forbidden: Changes ownership of system directories pooh# ^D exit Script done on Wed

Re: Porstdb -uU Continues to Fail?

2004-02-11 Thread Kris Kennaway
On Wed, Feb 11, 2004 at 12:49:33PM -0500, Bob Perry wrote: Hello, I run FreeBSD 4.8 RELEASE-p13 0#. Just ran: /usr/local/bin/cvsup -g -L 2 -z /etc/cvsupfile /usr/local/sbin/portsdb -uU CVSup ran successfully but portsdb -uU seemed to have a problem. Following is the output:

Re: wiping a partition

2004-02-11 Thread Jerry McAllister
I've gotten into a wierd situation where the best course seems to be wipe a (BSD) partition - without chnaging the size or location - and then restoring from backup. Based on the Handbook (sec. 12.3.2) the correct would seem to be: make backup cd / dd

Re: Porstdb -uU Continues to Fail?

2004-02-11 Thread Bob Perry
Kris Kennaway wrote: On Wed, Feb 11, 2004 at 12:49:33PM -0500, Bob Perry wrote: Hello, I run FreeBSD 4.8 RELEASE-p13 0#. Just ran: /usr/local/bin/cvsup -g -L 2 -z /etc/cvsupfile /usr/local/sbin/portsdb -uU CVSup ran successfully but portsdb -uU seemed to have a problem. Following is

Re: Porstdb -uU Continues to Fail?

2004-02-11 Thread Kris Kennaway
On Wed, Feb 11, 2004 at 01:27:56PM -0500, Bob Perry wrote: You need to update to 4.9-RELEASE, which has a newer make(1). Kris Thanks for such a quick response Ken. Do I understand you to say this is the only solution? For now, yes. It's possible the authors of those ports (or

Re: What settings are you using in /etc/make.conf?

2004-02-11 Thread Charles Swiger
On Feb 11, 2004, at 4:59 AM, Bryan Cassidy wrote: Just wondering if people wouldn't mind sharring their /etc/make.conf settings with others. Here's what I use on -STABLE: KERNCONF=NORMAL #KERNCONF=GENERIC CPUTYPE=pentium CFLAGS= -O2 -pipe COPTFLAGS= -O -pipe BOOTWAIT=5000 #NO_CPU_FLAGS=true

Re: sendmail confi help

2004-02-11 Thread Charles Swiger
On Feb 11, 2004, at 8:52 AM, stan wrote: How can I configure FreeBSD's default sendmail to work like this: If the message is for domain1 or domain2, deliver directly. If not, use a smarthost You also need to add domain1 and domain2 to /etc/mail/local-host-names. Then do a make restart in

Re: Porstdb -uU Continues to Fail?

2004-02-11 Thread Bob Perry
Kris Kennaway wrote: On Wed, Feb 11, 2004 at 01:27:56PM -0500, Bob Perry wrote: You need to update to 4.9-RELEASE, which has a newer make(1). Kris Thanks for such a quick response Ken. Do I understand you to say this is the only solution? For now, yes. It's possible the

Re: inbound http authentication proxy

2004-02-11 Thread Charles Swiger
On Feb 11, 2004, at 11:20 AM, jr315 wrote: building a FreeBSD email-gateway/proxy server. need to filter inbound mail and http/webmail requests for an exchange server. need to find good http authentication proxy for server running IIS. need proxy package that will authenticate inbound http

com ports in freebsd

2004-02-11 Thread Duane Winner
Hello, I have a question about how FreeBSD handles the serial ports. After messing around for 2 days, I finally got my PCMCIA modem working on my laptop. All I really had to do was to cd /dev/ ./MAKEDEV cuaa4 I did this because dmesg kept reporting the Megahertz modem at sio4. What I don't

Re: com ports in freebsd

2004-02-11 Thread Eric F Crist
On Wednesday 11 February 2004 01:23 pm, Duane Winner wrote: Hello, I have a question about how FreeBSD handles the serial ports. After messing around for 2 days, I finally got my PCMCIA modem working on my laptop. All I really had to do was to cd /dev/ ./MAKEDEV cuaa4 I did this because

another PPP question

2004-02-11 Thread Duane Winner
Hello again, I'm still messing around with trying to trim down my kernel as much as possible with just the functionality I need. After much trial and error, I found the line that kept PPP from functioning: #options INET6 (commented this line out) I really have no need at all for IPv6

Web browser ip address http format for port 8088

2004-02-11 Thread JJB
My IPS has blocked port 80. But I want to test my apache config. I have apache listening on port 8088. What is the format of the browser http://xxx.xxx.xxx.xxx/ URL to tell it to use different port number ___ [EMAIL PROTECTED] mailing list

RE: Web browser ip address http format for port 8088

2004-02-11 Thread Leonard, Phil
http://xxx.xxx.xxx:8088/ -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of JJB Sent: Wednesday, February 11, 2004 2:26 PM To: [EMAIL PROTECTED] ORG Subject: Web browser ip address http format for port 8088 My IPS has blocked port 80. But I want to test my

RE: Web browser ip address http format for port 8088

2004-02-11 Thread Michael Clark
http://blah.this.net:8080 -Original Message- From: JJB [mailto:[EMAIL PROTECTED] Sent: Wednesday, February 11, 2004 2:26 PM To: [EMAIL PROTECTED] ORG Subject: Web browser ip address http format for port 8088 My IPS has blocked port 80. But I want to test my apache config. I have apache

RE: Web browser ip address http format for port 8088

2004-02-11 Thread Jason Lavigne
http://host:port http://www.w3.org/Addressing/rfc1738.txt check out section 3.1. Jay -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of JJB Sent: Wednesday, February 11, 2004 3:26 PM To: [EMAIL PROTECTED] ORG Subject: Web browser ip address http format

firefox build fails

2004-02-11 Thread Goodleaf, John M
Hello, I cvsup'd the ports this AM and have tried to build firefox. Actually, it builds fine, it's the install that fails. I've tried on two machines, one running 4.9-STABLE and the other running 5.2-RELEASE. In both cases the the install fails with Error Code 1. There's no explanatory message

cdrom

2004-02-11 Thread Wouter Grol
Hi, I have an old pc on witch I want to install freebsd, only when the bios does not see the cdrom drive. But windows does. It is a normal IDE cdrom and set to slave (hard disk primary). Also when I run the installation it stops when it has to read the cdrom. Is there a way to manually set

Re: Graphical FTP client from command line

2004-02-11 Thread Dan Nelson
In the last episode (Feb 11), JJB said: How about some details about how do that. Can you use mc to navigate the remote FTP server to find what you are looking for? Yes. Maybe graphical directory tree is bad selection of words. Restated as FTP client that presents an local and remote

Re: cdrom

2004-02-11 Thread Charles Swiger
On Feb 11, 2004, at 4:02 PM, Wouter Grol wrote: I have an old pc on witch I want to install freebsd, only when the bios does not see the cdrom drive. But windows does. Hi-- If the BIOS doesn't recognize the CD-ROM drive, that's generally a NO-GO for FreeBSD working with the drive. You

Re: firefox build fails

2004-02-11 Thread Kenneth Culver
Quoting Goodleaf, John M [EMAIL PROTECTED]: Hello, I cvsup'd the ports this AM and have tried to build firefox. Actually, it builds fine, it's the install that fails. I've tried on two machines, one running 4.9-STABLE and the other running 5.2-RELEASE. In both cases the the install fails with

Re: /usr/src/sys/dev/aic7xxx errors when compiling

2004-02-11 Thread den
This is your mistake :) I have had the same problem when I compile my kernel with such options. It is undesirable to use strong optimization in compiling kernel, although usually it does not lead to problem. But this is the case when problem is appeared. Optimization with CFLAGS = -O3 cause

RE: firefox build fails

2004-02-11 Thread Goodleaf, John M
Yup. Whatever change was made looks good. It builds and installs now. Good work M[rs]. FirefoxPortsMaintainer! -John -Original Message- From: Kenneth Culver [mailto:[EMAIL PROTECTED] Sent: Wednesday, February 11, 2004 1:25 PM To: Goodleaf, John M Cc: '[EMAIL PROTECTED]' Subject: Re:

kernel failed 2 boot

2004-02-11 Thread molj
my kernel failed 2 compile, i tried to boot with the kernel.old but i couldn't do it like it says in the troubleshoot http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig- trouble.html#KERNELCONFIG-NOBOOT i try to do that when it shows me the counter from 10 backwards and the

[no subject]

2004-02-11 Thread molj
sorry, the moment i posted this mail i figured it out, i'm ok now :D thank you for your previous help -- Using M2, Opera's revolutionary e-mail client: http://www.opera.com/m2/ ___ [EMAIL PROTECTED] mailing list

Re: kernel failed 2 boot

2004-02-11 Thread Ion-Mihai Tetcu
On Wed, 11 Feb 2004 23:39:35 +0100 molj [EMAIL PROTECTED] wrote: my kernel failed 2 compile, i tried to boot with the kernel.old but i couldn't do it like it says in the troubleshoot http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig- trouble.html#KERNELCONFIG-NOBOOT

looking for a code statistics tool

2004-02-11 Thread Louis LeBlanc
Hey folks. I'm looking for a commandline code statistics tool. Not to tell me whether the code is stable, or will even compile, but what the makeup is. You know, how many lines in the file, how much is whitespace, comments, #defines, etc.. At least C analysis is needed, but if other languages

Re: FreeBSD has Two Firewalls?

2004-02-11 Thread Lowell Gilbert
Loren M. Lang [EMAIL PROTECTED] writes: It looks like ipfilter is a newer and more improved over ipfw They're independent implementations. It looks like ipfilter is a newer and more improved over ipfw, but I'm not sure. I'm looking for a good firewall with similar functionality to linux's

Source Code

2004-02-11 Thread Lord, Bruce J
To Whom It May Concern: I purchased the book TCP/IP Illustrated, Vol 2: The Implementation by Gary Wright and W. Stevens. This book only partially shows the source code for Mbufs: Memory Buffers. Is there some way that I can get that source code without loading the BSD i386 installation?

Re: looking for a code statistics tool

2004-02-11 Thread Lowell Gilbert
Louis LeBlanc [EMAIL PROTECTED] writes: I've looked through the ports/devel directory, but nothing relevant showed up searching for 'statistic', so I figured I'd see if anyone here had any ideas. has some tools that will help... ___ [EMAIL

  1   2   >