Stacey Roberts wrote:
-snip-
You're saying that the sis driver *does not* appears in the collapsed
list of network drivers during full graphical installation? What I'd try
to verify next is the IO port resource addres of the nic. It should be
in the documentation that came with the card.
Hi all,
When I downlaoded the ports initially with cvsup I
could install any port by typing make install. After
I updated the ports a couple of times, I get the error
make: dont know who to make install. Stop in
/usr/ports...
Why am I getting this error now and not before? I
tried with lots of
Hi,
I was just wondering if it is possible to upgrade from 4.6.2 - 4.7 via the
net. Is this possible on a running system?
I have read the stuff about upgrading in the release notes but it is a bit
vague. It says you should try /stand/sysinstall but from the version you are
upgrading to. So
leave a blank line between your reply and the text being replied
to. it's really hard to read when it's stuffed all together.
# [EMAIL PROTECTED] / 2002-10-15 22:29:11 -0700:
Stacey Roberts wrote:
You didn't mention whether or not the nic is onboard or PCI, but did
it actually ever
On Tuesday, Oct 15, 2002, at 23:31 US/Pacific, Iain wrote:
I was just wondering if it is possible to upgrade from 4.6.2 - 4.7
via the
net. Is this possible on a running system?
Possible but not recommended/supported.
I have read the stuff about upgrading in the release notes but it is a
Hi everyone:
I am installing 4.7-REL on a PC with one PRIMARY and one EXTENDED partition.
The PRIMARY
partition is FAT and I have W98 there. I want to use the EXTENED partition
(the WHOLE partition -
there is currently nothing there) for FreeBSD but I read that FreeBSD needs
to be
# [EMAIL PROTECTED] / 2002-10-16 02:18:32 -0400:
Hi. Just started to play with KDE 3.1, even though it's still in
beta and I don't really have time to play with it technically. hehe.
Either way, I've looked at it and I must say, the eye candy is rather
nice and I'm kind of liking
subscribe freebsd-questions
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
subscribe freebsd-questions
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
Hey everyone:
Sorry the SYSINSTALL/FDISK table didn't come out right on my last post.
I have re-entered it below.
John
Disk Name: ad0
Disk geometry: 4865 cyls/ 255 heads / 63 sectors = 78156225 (38162MB)
Offset Size End Name PTypeDesc.
Subtype
John Daniels wrote:
Hey everyone:
Sorry the SYSINSTALL/FDISK table didn't come out right on my last post.
I have re-entered it below.
John
It didn't matter. My mailer mangled it anyway. The sysinstall fdisk
will do what you need to do. You delete the extended partition and
then use
Hi,
I wonder whether installing any flavour of BSD, be it FREE, Open or Net BSD would be
possible
on the linux ext2 or ext3 partition.
I mean installing and running on, not mounting.
I rememeber seeing some words about on the web where the author presented some
advantage
of it, warning
Hi.
On Wed, 16 Oct 2002 09:23:09 +0200 (CEST)
peter vamosi [EMAIL PROTECTED] wrote:
I wonder whether installing any flavour of BSD, be it FREE, Open or
Net BSD would be possible on the linux ext2 or ext3 partition.
I mean installing and running on, not mounting.
Installing *BSD on a linux
Hi.
Here is the error message while trying to fetch my mail from the mail
account via fetchmail:
1 message for USERNAME at pop.provider.de (9014 octets).
reading message [EMAIL PROTECTED]:1 of 1 (9014 octets) fetchmail:
SMTP connect to localhost failed fetchmail: SMTP transaction error while
Thanks for the reply.
From: Kent Stewart [EMAIL PROTECTED]
It didn't matter. My mailer mangled it anyway. The sysinstall fdisk will do
what you need to do. You delete the extended partition and then use what is
left as a FreeBSD slice.
OK, but the sysinstall fdisk has a Change Type option
Acel,
1 message for USERNAME at pop.provider.de (9014 octets).
reading message [EMAIL PROTECTED]:1 of 1 (9014 octets) fetchmail:
SMTP connect to localhost failed fetchmail: SMTP transaction error while
fetching from pop.puretec.de fetchmail: Query status=10 (SMTP)
You need to have an SMTP
Hi,
On 02 10 16, Iain wrote:
I was just wondering if it is possible to upgrade from 4.6.2 - 4.7 via the
net. Is this possible on a running system?
here goes my experience.
I have a small server, which is short on disk space and I can't make a
buildworld on it. So, the idea is to make
John Daniels wrote:
Thanks for the reply.
From: Kent Stewart [EMAIL PROTECTED]
It didn't matter. My mailer mangled it anyway. The sysinstall fdisk
will do what you need to do. You delete the extended partition and
then use what is left as a FreeBSD slice.
OK, but the sysinstall fdisk
I have freebsd 4.6 release and I am interesting to
update it to 4.7 via CVSUP
The box is located 3000 Kms away and I can only connect
via ssh.
a) How much space is required in order to make a buildworld
(downloading CVSUP, compiling, installing)
b) What is the best failsafe method, so in
Hi Gurus,
I did a fresh install of 4.7. The installation went fine but the box
doesn't boot up. It hangs after finding a boot sector on IDE 0.
When I did the installation I probably picked the wrong boot loader. I
choose NONE (I always get confused at that section of the installation).
I
Hi People,
I've been Googling around trying to find an example to setup reverse DNS on
my server but have had no luck. I've read through the administrators guide
also but there doesn't seem to be any clear info on setting this up. Hence
I have resorted once again to the faithful FreeBSD mail
On Wed, 2002-10-16 at 09:27, BigBrother wrote:
I have freebsd 4.6 release and I am interesting to
update it to 4.7 via CVSUP
The box is located 3000 Kms away and I can only connect
via ssh.
a) How much space is required in order to make a buildworld
(downloading CVSUP, compiling,
Hi David.
Thanks for sour answer...
On Wed, 16 Oct 2002 17:33:31 +0930
David Lloyd [EMAIL PROTECTED] wrote:
You need to have an SMTP server listening on your localhost for
fetchmail to work. Here's what happens:
Yes, i know. But postfix is not starting in the jail, that is my main
problem.
Hi.
pkg_info
asg
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
On Wednesday, Oct 16, 2002, at 01:37 US/Pacific, Nelis Lamprecht wrote:
I've been Googling around trying to find an example to setup reverse
DNS on my server but have had no luck. I've read through the
administrators guide also but there doesn't seem to be any clear info
on setting this
On 02 10 16, Tom Carrick wrote:
The box is located 3000 Kms away and I can only connect
via ssh.
world, compile kernel, drop to single user, install world, install
;) don't drop to single user mode ;)
you can stop all unneeded services (even sshd, but don't kill your
active session) and
Oops. Yes, you're right, I forgot.
On Wed, 2002-10-16 at 09:58, Paulius Bulotas wrote:
On 02 10 16, Tom Carrick wrote:
The box is located 3000 Kms away and I can only connect
via ssh.
world, compile kernel, drop to single user, install world, install
;) don't drop to single user mode
Hello,
I have a question about the driver for the Cyclades-Multiport-Cards.
We're using a Cyclom-4YoP under FreeBSD4.7 and i got the following
message:
.../kernel: cy0: 1 more silo overflow (total 1)
What does this mean ? Is it an error ? If so, how can we prevent it ?
With best
Recipient of the infected attachment: [EMAIL PROTECTED]\Inbox
Subject of the message: Happy Allhallowmas
One or more attachments were deleted
Attachment size.scr was Deleted for the following reasons:
Virus W32.Klez.H@mm was found.
application/ms-tnef
-Original Message-
From: Peter Pentchev [mailto:[EMAIL PROTECTED]]
Sent: 16 October 2002 11:37
To: Carroll, D. (Danny)
Cc: [EMAIL PROTECTED]; [EMAIL PROTECTED]
Subject: Re: FW: monitor ALL connections to ALL ports
On Wed, Oct 16, 2002 at 10:48:01AM +0200, [EMAIL PROTECTED] wrote:
Lo ppl,
i'd like to link a WinME PC to my FreeBSD via Bluetooth or WLAN, depending
on what
works and / or is cheaper. The (air-line) distance is around 10 meters
through 2
walls.
What would you recommend for this scenario (e.g., what drivers will work
fine with
FreeBSD)?
- 2
Would this no produce a packet storm?
For every packet sent/received a new packet would be set to the monitor.
For this new packet a new packet would be set to the monitor.
For this new packet a new packet would be set to the monitor.
For this new packet a new packet would be set to the monitor.
÷ Wed, 16.10.2002, × 07:17, Pookie ÎÁÐÉÓÁÌ:
I have a Sony VAIO GRX570. As it stands there is no serial port on it.
Sony offers a port replicator(docking station), thus giving me a serial
port. Now, there expensive, $200US, im thinking of getting one but I
need to nknow a few things. Should I
On Wed, Oct 16, 2002 at 12:16:50AM -0700, Rob Sramek wrote:
I wiould be interested in learning more about FreeBSD and if this works on
windows 98 platform. If not, how do I use this along with existing OS on
my computer...
FreeBSD is not a program that runs under Win98[*] --- it's a whole
On Wed, Oct 16, 2002 at 09:41:01AM +0100, Tom Carrick wrote:
On Wed, 2002-10-16 at 09:27, BigBrother wrote:
a) How much space is required in order to make a buildworld
(downloading CVSUP, compiling, installing)
A few hundred MB is a safe bet.
Actually, if you're going to do a complete
I've had big trouble getting my Canon multifunction printer to work
under FreeBSD. My question is, What printer can you all suggest as
being well supported under FreeBSD, and at the same time relatively
cheap. I saw a lexmark z23 for $49, but don't know if it would work
very well. I'm
If so I would be very interested to see the section of
the kernel configuration file where the card is
configured, as I am having severe difficulty in
getting a Byterunner tc800 to work.
__
Do You Yahoo!?
Everything you'll ever need on one web
Hi ,
I am using Vmware workstation for Win32 Vr.3.0.
it runs only 640x480.Can any one tell me from where i have to download
Vmware Tools for Vmware workstation for Win32 Vr.3.0.
Vmware tools available for 1.x and FreeBSD Guest Operating
Systems only.it is avl in VMware.com.
i am unable to
Here's an example I found. This would be for the 1.2.3.0 subnet. Host
one.example.com is 1.2.3.1. :
In your named.conf file:
zone 3.2.1.in-addr.arpa {
type master;
file 3.2.1.in-addr.arpa.zone;
};
And the zone file:
$TTL 86400
@ IN SOA @
MUSIC INDUSTRY GOES NETWORKMARKETING!!!
Join Our Team Today!
Now you can access ALL of your favorite music LEGALLY
from the Internet right from your computer for less than the
cost of ONE CD per month.
EXCLUSIVE WORLDWIDE MLM OPPORTUNITY
We're growing at over 45% PER WEEK!!
- U.S. launched
I got a problem with make installworld upgrading from 4.4 Release to 4.6.2
Release. make buildworld and compiling a new kernel worked fine, but
installing world doesn't work. I always get the following error:
install -c -o root -g wheel -m 444 /usr/src/share/termcap/map3270
Hi,
I can't send email to the FreeBSD lists because my DNS
configuration is hosed--the bit from my ISP, not my
own bind :)
Anyway, is there a site that could tell me what the
nameservers outside my network see for my domain?
Best regarads,
Carlos.
On Wed, 16 Oct 2002, Carlos Carnero wrote:
Anyway, is there a site that could tell me what the
nameservers outside my network see for my domain?
Try 'dig'
dig www.foo.com @123.123.123.123
tells you how www.foo.com resolves at 123.123.123.123. Assuming
that 123.123.123.123 lets you
Hello,
can I make the Freebsd boot selector chain to an extended partition
similar like switching to an alternate disk?
-Hanspeter
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
Hi:
When I upgraded via buildworld from 4.6.2 to RELENG_4_7 my
machine started to exhibit some delay (a few seconds) at booting. The
boot screen goes fine up to:
[...]
atapci0: VIA 82C586 ATA33 controller port 0xd000-0xd00f at device
7.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
few
On Wed, 16 Oct 2002, Fernando Schapachnik wrote:
Date: Wed, 16 Oct 2002 11:02:06 -0300
From: Fernando Schapachnik [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Cc: Fernando Schapachnik [EMAIL PROTECTED]
Subject: 4.7R boot delay
Hi:
When I upgraded via buildworld from 4.6.2 to RELENG_4_7
Hello all,
Can somebody explaine me what I do wrong when building jdk1.3.1 port on
FreeBSD 4.6-STABLE?
[root@lion jdk13]# make -DNATIVE_BOOTSTRAP -DNODEBUG build
=== Building for jdk-nodebug-1.3.1p7
i386 Build started: 1.3.1-p7-root-021016-17:10
ERROR: BOOTDIR does not point to a valid Java
En un mensaje anterior, John Bleichert escribió:
This used to happen to me as well - boot would stall momentarily trying
tpo figure out the onboard Promise RAID controller on my motherboard.
Since I wasn't using it anyway, I disabled it in the BIOS and it never
happens anymore.
Thanks,
test plz ignore
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
On Wed, Oct 16, 2002 at 05:16:25PM +0300, Andrey Simonenko wrote:
Hello all,
Can somebody explaine me what I do wrong when building jdk1.3.1 port on
FreeBSD 4.6-STABLE?
[root@lion jdk13]# make -DNATIVE_BOOTSTRAP -DNODEBUG build
=== Building for jdk-nodebug-1.3.1p7
i386 Build started:
Hi everyone:
I am installing 4.7-REL on a PC with one PRIMARY and one EXTENDED partition.
The PRIMARY
partition is FAT and I have W98 there. I want to use the EXTENED partition
(the WHOLE partition -
there is currently nothing there) for FreeBSD but I read that FreeBSD needs
to
Hello -
On Tue, 15 Oct 2002, joe wrote:
I am atrying to compile a linux program under FreeBSD 4.7-STABLE. I
have installed linux_base but seem to be missing a number of files,
specifically header files.
DISCLAIMER - this is from a FreeBSD newbie.
If the program is not Linux-specific
On Wed, 16 Oct 2002, Roman Neuhauser wrote:
# [EMAIL PROTECTED] / 2002-10-15 13:58:29 -0400:
*nix clients all worked fine, but this wasn't the MsWin server
(the name of which I forget).
http://www.cvsnt.org/ perhaps?
Yes, that looks right. At that time the server was considered
Dear Sirs.
I reported a few days ago about a problem related to an 'Abort trap'
error whereas I suspected the gcc-2.95-4 compiler suite doing weird
things.
The problem has been solved and was very simple, but tricky to find.
I think many other 'Abort trap' errors reported in the newsgroup
On 10/16/02 at 6:53 AM Carlos Carnero wrote:
|Hi,
|
|I can't send email to the FreeBSD lists because my DNS
|configuration is hosed--the bit from my ISP, not my
|own bind :)
|
|Anyway, is there a site that could tell me what the
|nameservers outside my network see for my domain?
=
In an older episode (Wednesday 16 October 2002 10:42), Jonas Fornander wrote:
How can I add the standard boot loader or do I have to re-install again?
i don't know (yet) how you can add the standard boot loader,
but until then i suggest you try the uniload bootloader from
dig at a.gtld-servers.net
dig @a.gtld-servers.net YOURDOMAINNAME
- Original Message -
From: Carlos Carnero [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, October 16, 2002 07:23 PM
Subject: OT: FreeBSD mailing lists and DNS
Hi,
I can't send email to the FreeBSD lists
Hello.
I am facing some strangeness from SunOS/sparc clients, mounting users
home directories on a FreeBSD 4.6 server. The client is unable to
mount the remote directory.
On the server pave, a tcpdump with the host geny gives :
...
18:19:30.110221 geny.0 pave.imag.fr.nfs: 0 null (DF)
Hello:
I'm trying to install some server-side mods
to get some bots on my Quake2 server, but I've
tried with Eraser and Lithium (and more I don't
remember right now), but I haven't had any success.
I'm using a CVSuped version of Quake2 that supports
IPv6
telnetd: login_tty: Inappropriate ioctl for device.
what this mean and how can i fix it ?
thx
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
Hello questions :
You or someone using your email address subscribed to a FREE membership for the MLMspy
Insider, with email address [EMAIL PROTECTED] If for some reason you don't wish
to receive Insider News on today's MLM's, Home Based Businesses Opportunities,
please scroll to the
Hello Kris,
| You do realise the sshd in 4.4-RELEASE has a serious security
| vulnerability?
Unfortunately I didn't know that. Would the coredump (and security)
problem be fixed after upgrading SSHD?
Thank you.
Jacco
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe
We have processed your remove request successfully.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
You seem like you know what your talking, all im trying to do with the
serial port is use my external modem, my internal is a dumb winmodem
thus I cant use it. From what I understand I have 4 solutions to my
modem problems
1. Buy a port replicator
2. Buy a USB Modem
3. Buy a PCMCIA modem
4. Buy
I'm currently running 4.5, and want to upgrade my machine and was
wondering what you might have for recommendations.
It has dual 333mhz Pentium II cpus, an S3 video card, 256mb RAM
and a 20gb hard drive - not cutting edge hardware by any means!
All it does is serve my small web sites via Apache
I would recommend a cvsup, build world, build kernel, etc. upgrade to
4.7-RELEASE personnally. Doing the upgrade this way will keep downtime to
a minumum ( perhaps 10 minutes downtime ).
- Mike
I'm currently running 4.5, and want to upgrade my machine and was
wondering what you might have
I was just wondering something. I know this updates the ports but what I want to know
is what EXACTLY does this command do in a little more detailed answers but simple
enough to understand. The command is this
cvsup -g -L 2 -h cvsup2.freebsd.org /usr/share/examples/cvsup/ports-supfile
Thanks.
At 10:24 AM 10.16.2002 -0700, Mike Hogsett wrote:
I would recommend a cvsup, build world, build kernel, etc. upgrade to
4.7-RELEASE personnally. Doing the upgrade this way will keep downtime to
a minumum ( perhaps 10 minutes downtime ).
- Mike
I'm currently running 4.5, and want to upgrade
Just looking for other people's opinions of the new KDE. I don't
normally use it, but I was considering switching to it. Hence the feedback
request. :)
At 09:01 AM 10/16/02 +0200, Roman Neuhauser wrote:
# [EMAIL PROTECTED] / 2002-10-16 02:18:32 -0400:
Hi. Just started to
On Sun, Oct 13, 2002 at 10:17:26PM -0400, Bill Moran wrote:
[please stop top-posting]
And charset=GB2312 trips my spam filters. If you don't mind, then I
won't mind either.
Now that I've opened my mouth, sure hope mutt does the right thing.
--
David Kelly N4HHE, [EMAIL PROTECTED]
On Monday, Oct 14, 2002, at 17:31 US/Mountain, Chad Leigh -- Shire.Net
LLC wrote:
On Monday, October 14, 2002, at 01:59 , Chad Leigh -- Shire.Net LLC
wrote:
Hi
I run an adadptec 2100S. Today it displayed the following message,
and while the system was still running and pingable, you
I get the following:
=== Extracting for AbiWord-1.0.3
Checksum OK for AbiWord/abiword-1.0.3.tar.gz.
=== AbiWord-1.0.3 depends on executable: unzip - found
=== AbiWord-1.0.3 depends on executable: gmake - found
=== AbiWord-1.0.3 depends on executable: automake14 - found
===
Hello.
I wish to setup a Kerberos V environment using the default stuff
comming with FreeBSD 4.7-RELEASE.
When I did a make world I ommited compiling Kerberos IV support,
only compiled Kerberos V/Heimdal and the great question is now:
I miss several programs to initialize a KDC/master KDC and I
Someone, quite probably Bryan Cassidy, once wrote:
I was just wondering something. I know this updates the ports but what I want to
know is what EXACTLY does this command do in a little more detailed answers
but simple enough to understand. The command is this
cvsup -g -L 2 -h
Hi people
How can i get my internal gigabit-NIC running on freebsd 4.7 RELEASE ?
Compaq Proliant ML 310 with:
NC7760 PCI Gigabit Server Adapter (Integrated/Embedded)
hmmm i think this is a Broadcom Gigabit NIC but i cannot find the TYPE :-( The
includet bge device doesn't work.
My Box:
On Wed, Oct 16, 2002 at 01:14:12PM -0400, Jonathan Arnold wrote:
I'm currently running 4.5, and want to upgrade my machine and was
wondering what you might have for recommendations.
[...]
3] A reformat and complete upgrade to 5.0 - I already have
the web site mailing list dbs backed up.
Bryan Cassidy wrote:
I was just wondering something. I know this updates the ports but what I want to
know is what EXACTLY does this command do in a little more detailed answers but
simple enough to understand. The command is this
cvsup -g -L 2 -h cvsup2.freebsd.org
Why doesn't postmaster put a procmail filter infront of the
list software to prevent this abuse?
traceroute...
19 g2-1.bas2-m.sc5.yahoo.com (64.56.207.150) 91.545 ms 94.781 ms 92.792
ms
20 vl44.bas2-m.sc5.yahoo.com (66.163.160.222) 92.311 ms 91.559 ms 90.283
ms
21
The information below is correct; however I sould advise against doing so
at this point in time. Release 4.2.3 is currently broken in the ports
tree. So you can either wait, do it anyway and see if any of the problems
effect your php scripts or use the patches listed in the gnat.
Someone,
Seems to mean that they are hung off of one of Yahoo!'s routers in
Exodus's Santa Clara colo site. (which is absolutely gorgeous btw).
Why doesn't postmaster put a procmail filter infront of the
list software to prevent this abuse?
traceroute...
19 g2-1.bas2-m.sc5.yahoo.com
I've found that PHP 4.2.3 seems to have a problem with ftp_*
functions. I have a web-app called SquirrelMail with a plugin that uses
FTP to manage your .procmailrc and SpamAssassin settings. The plugin
works about 5-10% of the time.
This web-app on an older box running PHP
At 01:15 PM 10.16.2002 -0500, David Kelly wrote:
On Wed, Oct 16, 2002 at 01:14:12PM -0400, Jonathan Arnold wrote:
I'm currently running 4.5, and want to upgrade my machine and was
wondering what you might have for recommendations.
[...]
3] A reformat and complete upgrade to 5.0 - I already
Hi:
Please read the whole post before replying. Yes, I know that
DOS allows 4 PRIMARY Partitions and the history and purpose
of an EXTENDED Partition.
I am installing 4.7-REL on a PC with one PRIMARY and one
EXTENDED partition. The PRIMARY partition is FAT and I have
W98 there. The EXTENDED
Hi all
I know this is not a FreeBSD question, but I hope someone can help me.
I have one global IP and a cisco router. On my LAN I have 3 FreeBSD 4.7
servers. On one server I run the standard ftpd, so I have to forward
ftp traffic to that server. I should forward:
21 and 49152-65535, right?
[EMAIL PROTECTED] wrote:
We have processed your remove request successfully.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
I haven't asked for any remove request !
--
JFRH.
To Unsubscribe: send mail to [EMAIL PROTECTED]
me either, curious.
--- Juan Francisco Rodriguez Hervella [EMAIL PROTECTED]
wrote:
[EMAIL PROTECTED] wrote:
We have processed your remove request
successfully.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body
of the message
I
me either, curious.
I think these are related to some pumice-brained children's
attempts to sign the list up to these other lists. Then someone
has to send a thing in to unsubscribe the list from the other lists
and thus the unsubscribe messages on the list.
jerry
--- Juan
Why doesn't postmaster put a procmail filter infront of the
list software to prevent this abuse?
me either, curious.
I think these are related to some pumice-brained children's
attempts to sign the list up to these other lists. Then someone
has to send a thing in to unsubscribe
DEAR SIR,
MAY THE BLESSINGS OF GOD BE UPON YOU AND GRANT YOUR FAMILY AND YOU THE
WISDOM AND SYMPATHY TO UNDERSTAND OUR SITUATION AND HOW MUCH WE REALLY NEED YOUR
ASSISTANCE. I AM THE WIFE OF ALHAJI ISMAILA GWARZO THE
NATIONAL SECURITY ADVISER TO THE FORMER LATE HEAD OF STATE GEN. SANI
You would think with so many of these originating from US Ip addresses
that law enforcement woulda slapped all their butts in jail by now..
SHEESH
On Wed, 16 Oct 2002, FatiGwarzo wrote:
DEAR SIR,
MAY THE BLESSINGS OF GOD BE UPON YOU AND GRANT YOUR FAMILY AND YOU THE
WISDOM AND
FreeBSD the hardest thing to beat into peoples heads has been don't use
-current on critical machines.
Thanks for insisting on that too! I don't have, by any means, a
critical machine - it's just a play web site and mailing list -
but I do like to have them up, so perhaps I'll stay away for
From: Jesse Geddis [EMAIL PROTECTED]
Using a dns round robin of FreeBSD 4.6.2 web servers running apache 1.3.27
is there anything special that has to be done in order to make Front Page
2002 extensions work assuming the module is installed on all web servers
and
the front page files (binaries
Hi again :-)
Just some filesystem questions.
What filesystem does FreeBSD use for disks (1.44mb and 120 mb). In
windows they use ms-dos, but my guess is that we don't use FFS for
disks? and how do I format a disk to our filesystem?
Why is it what we don't have to fragment our hard-disks all
Thanks, I'll try this (I've just started to download linux-sun-jdk13 from
Sun). Actually I want to install Java plugin for Mozilla (compiled for
FreeBSD), as I understand I try to install correct port for this, isn't
it? What are the better arguments for make utility for jdk13 port if I
want to
Jonas Fornander [EMAIL PROTECTED] writes:
How can I add the standard boot loader or do I have to re-install again?
I'm fairly sure that you can boot the install floppy and at some point
while it's booting it gives you a chance to interrupt and boot from the
hard disk. (You might have to wait
On Tue, Oct 15, 2002 at 08:04:10PM -0700, Mark Miller wrote:
As far as I can tell, SSE applies only to pentium III cpus and later; is
this correct? dmesg reports for me
CPU: Pentium II/Pentium II Xeon/Celeron (399.10-MHz 686-class CPU)
Origin = GenuineIntel Id = 0x665 Stepping = 5
On Tue, Oct 15, 2002 at 11:31:07PM -0700, Roberto Armenteros wrote:
Hi all,
When I downlaoded the ports initially with cvsup I
could install any port by typing make install. After
I updated the ports a couple of times, I get the error
make: dont know who to make install. Stop in
On Wed, Oct 16, 2002 at 07:07:39PM +0100, Neil McGann wrote:
I get the following:
=== Extracting for AbiWord-1.0.3
AbiWord compiles correctly in a fresh environment. Perhaps you have
out-of-date versions of the packages upon which AbiWord depends, or
you have extra (stale) files installed
I strongly recommend that you get a used PostScript laser printer, or at
least a laser printer with an HP laser printer emulation. Unless you're
not apt to care about ink costs and jet clogging and slow printing.
300 DPI is plenty good for most purposes. I see new 600 DPI laser
printers are
On Wed, Oct 16, 2002 at 09:55:31PM +0200, Socketd wrote:
Hi again :-)
Just some filesystem questions.
What filesystem does FreeBSD use for disks (1.44mb and 120 mb). In
windows they use ms-dos, but my guess is that we don't use FFS for
disks? and how do I format a disk to our filesystem?
1 - 100 of 174 matches
Mail list logo
