When I first installed FreeBSD I was able to run halt and reboot as
su without the full /sbin/reboot command. After adding a new path to
PATH, I've been unable to run these commands without specifying the full
path.
Recently I tried to install acroread 7.0 and the installation complained
I
Erik Nørgaard wrote:
The scanner works, only now it doesn't scan the entire area for
negatives (haven't tried ordinary scannings). Only two negatives are
scanned instead of three. Same config, same firmware.
Any way to solve this?
Upgrading sane-backend from version 1.0.15 to 1.0.16 caused
Yuan Jue wrote:
Does anybody successfully run Internet Explorer under Wine in
FreeBSD? What should I do to get it run? Any suggestion will be
appreciated.
I recommend qemu emulator too. It's easy to install, you get
native platform and it's not that slow (even usable on a 366MHz
notebook).
On Wed, 2005-Sep-14 15:22:32 -0300, Marc G. Fournier wrote:
From what little I've learnt so far, there is an HP Fiber Channel
controller that is used to connect the Blade to the SAN, but I can't find
anywhere that indicates that there is a FreeBSD driver for it ...
A model number, chipset or
Dave Webster wrote:
When I first installed FreeBSD I was able to run halt and reboot as
su without the full /sbin/reboot command. After adding a new path to
PATH, I've been unable to run these commands without specifying the full
path.
[...]
Here is the output of echo $PATH:
Gayn Winters wrote:
-Original Message-
From: Alex Zbyslaw [mailto:[EMAIL PROTECTED]
Sent: Wednesday, September 14, 2005 1:59 AM
To: [EMAIL PROTECTED]
Cc: freebsd-questions@freebsd.org
Subject: Re: Fixing a MBR (and more) that ??? trashed
Gayn Winters wrote:
Alex Zbyslaw
Hello,
I'm a new FreeBsd (French) user, and after 3 days of none-working
installs, I, now can boot my server with FreeBSD installed on it.
The problem is : it ask me to enter the path for the Shell, and I don't
know where it is. Here is the message I get when I attempt to boot :
Can't exec
Julien FOURNIER wrote:
Can't exec /bin/sh fot /etc/rc : No such File or directory.
Enter full path of Shell or type Enter for /bin/sh
If I type Enter, the system tells me that the file can't be found...I
don't know how to do!!!
I have installed the system as following : Standard installation
Hello.
I've installed 5.4-STABLE on my IBM Bladecenter HS20 (8677). Each chassis has
two network interfaces based on Broadcom. The system found bge0 and bge1
media: Ethernet autoselect (1000baseSX full-duplex)
But each of them has no carrier.
miibus is built in the kernel but miibus0 isn't
Pavel Baleshenko wrote:
Can anyone help me to find the problem?
Did you plug in a cable?
Nick.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL
sure :)
Really it isn't like a real PC. Interface should be enabled for a chassis in
management. And it's done. BladeCenter is connected to network of course
too. The same configuration works on Linux and Win on other chassises.
Pavel Baleshenko wrote:
Can anyone help me to find the problem?
Your partitioning is not correct. There is no point to put /bin and /etc
on their own partitions as they take very small amount of room.
I recommend to make another clean install and select Auto option when
creating slices
Usually separate partitions are recommended for the followind
BTW the reason of the booting problem is that kernel mounts / partition
and expects to find /bin/sh from there but as the /bin is on separate
partiton, then it fails.
-- Rein
Rein Kadastik wrote:
Your partitioning is not correct. There is no point to put /bin and
/etc on their own
On Wed, Sep 14, 2005 at 12:00:12PM -0400, Grant Peel wrote:
Now I am really confused.
First of all install ipcalc NOW.
Up until this morning I thought I had a good handle on when I need to use
the real Netmask and Broadcast.
For example, If I have 3 servers, and my upline asigns me a block
I am having trouble with THESE instructions:
http://people.freebsd.org/~rse/mirror/
I'm trying to create a RAID1 system with FreeBSD and the instructions
are not working. I'm getting this error:
mail# gmirror insert gm0 /dev/da0
Cannot access provider da0.
The command is trying to add the first
I get the same effect in Opera. This seems to happen
regardless of the window manager in use; Gnome, fvwm, or
xterm.
Thanks in advance.
Harold
When I attempt to either do a printview, or print, using
Firefox the
program shuts down. My printcap file contains entries that
were
automatically
Thanks John,
What you are saying make perfect sense based on what I've had to do in the
past. Just to clarify ...
Lets say I have 5 machines (which I do)
And lets say I have 10 blocks of IP address from my upline (which I do)
1.1.1.1/24
2.2.2.2/24
3.3.3.3/24
4.4.4.4/24
...
And, lets say
Thanks John,
What you are saying make perfect sense based on what I've had to do in the
past. Just to clarify ...
Lets say I have 5 machines (which I do)
And lets say I have 10 blocks of IP address from my upline (which I do)
1.1.1.1/24
2.2.2.2/24
3.3.3.3/24
4.4.4.4/24
...
Jerry,
I apologise. Its late in the day for me and the email addresses are blending
into one :-)
Anyways, so the examples I put together are correct. Good. So I wonder why,
the 1 IP I have, won't work with the real netmask, but only with the 255.
One more item of note, I see in dmesg that
Rem P Roberti wrote:
When I attempt to either do a printview, or print, using Firefox the
program shuts down. My printcap file contains entries that were
automatically created by CUPS. Any ideas why the Firefox printing
functions are inop?
I solved that problem last night, but I'm not sure
[EMAIL PROTECTED] (Tim Goodaire) writes:
On Tue, Sep 13, 2005 at 04:48:21PM -0400, Lowell Gilbert wrote:
[EMAIL PROTECTED] (Tim Goodaire) writes:
On Tue, Sep 13, 2005 at 03:09:54PM -0300, [EMAIL PROTECTED] wrote:
hi Tim,
Is it listed here?
Hello *,
I am using ProFTPd with MySQL authentication. Is possible to disable
UID/GID mapping ?
I can log into existing ftp account but when I use for example ftp
command 'ls', connection is immediatedly terminated. The reason of
termination is, that proftpd is trying to map UID/GID number to
Jerry,
I apologise. Its late in the day for me and the email addresses are blending
into one :-)
Anyways, so the examples I put together are correct. Good. So I wonder why,
the 1 IP I have, won't work with the real netmask, but only with the 255.
One more item of note, I see in
Grant Peel wrote:
Jerry,
I apologise. Its late in the day for me and the email addresses are
blending into one :-)
Anyways, so the examples I put together are correct. Good. So I wonder
why, the 1 IP I have, won't work with the real netmask, but only with
the 255. One more item of note, I
I just updated 6 ports. One was xorg-server-6.8.2_5.
Now I get this error message when I try to run wine inside fluxbox.
Nothing else has changed.
Can someone tell me why?
X Error of failed request: BadAlloc (insufficient resources for operation)
Major opcode of failed request: 53
Hi,
Is it possible in FreeBSD to rollback a snapshot that is done with
mksnap_ffs or with mount -o snapshot?
It seems that there is no way of doing that in FreeBSD am i right ?
---
Omer Faruk Sen
http://www.EnderUNIX.ORG
Software Development Team @ Turkey
Jerry,
I see, you changed the real netmask in the second and third group to 255.
Hmm, I went through this before, and unless I added 1 ip from each block
with the real netmask, the ip wouldnt take.
FYI when my ISP sends me a new block, they always give me the network,
router, broadcas
On Thu, Sep 15, 2005 at 09:40:22AM -0400, Larry wrote:
I just updated 6 ports. One was xorg-server-6.8.2_5. Now I get
this error message when I try to run wine inside fluxbox. Nothing
else has changed. Can someone tell me why?
[error message follows]
I had a similar problem, although I
Hi,
I am using the FreeBSD to become the NAS so that
can provide PPPoE and PPP services to the clients
which is worked with the Radius. I have successfully
started the PPP and PPPoE services and connected to
the internet with the authentication of the Radius.
However, I face one serious
Hello,
I use a FreeBSD 5.3. I want to synchronize my 2
machines. I tried to connect to a ntp server, but I
couldn't. When I type this command ntpdate -v
ntp.imag.fr, I have the following message:
host found
ntpdate (imag.imag.fr) : No route to host
ntpdate (imag.imag.fr) : No route to
I have a 5.4-STABLE server that I've reconfigured to use syslog-ng
instead of syslogd. It collects logs from all our servers and sorts
them into per-host folders.
Our network admin showed me his gentoo machine earlier which uses ccze
to colour log files as they scroll up the screen. He
bannour souha wrote:
Hello,
I use a FreeBSD 5.3. I want to synchronize my 2
machines. I tried to connect to a ntp server, but I
couldn't. When I type this command ntpdate -v
ntp.imag.fr, I have the following message:
host found
ntpdate (imag.imag.fr) : No route to host
ntpdate
Jason King wrote:
I am having trouble with THESE instructions:
http://people.freebsd.org/~rse/mirror/
I'm trying to create a RAID1 system with FreeBSD and the instructions
are not working. I'm getting this error:
mail# gmirror insert gm0 /dev/da0
Cannot access provider da0.
The command is
On Thu, Sep 15, 2005 at 09:31:20AM -0400, Jerry McAllister wrote:
Anyway, all the aliases for any one NIC card must be 255.255.255.255.
Not so. All aliases for any one NIC on the same network must be
0x. If you have an alias which is on another network, then the
first alias on that
Vladimir Dvorak wrote:
Hello *,
I am using ProFTPd with MySQL authentication. Is possible to disable
UID/GID mapping ?
I can log into existing ftp account but when I use for example ftp
command 'ls', connection is immediatedly terminated. The reason of
termination is, that proftpd is trying to
On Thu, Sep 15, 2005 at 09:31:20AM -0400, Jerry McAllister wrote:
Anyway, all the aliases for any one NIC card must be 255.255.255.255.
Not so. All aliases for any one NIC on the same network must be
0x. If you have an alias which is on another network, then the
first alias on
My opinion on WINE is that it merely harms people who are writing
software
for FreeBSD. If I write a wordprocessor for Linux or FreeBSD and try
to
sell it, why would a customer buy it when he can just use his
Microsoft
Word under Wine?
As a result the existence of these programs
Jerry,
I see, you changed the real netmask in the second and third group to 255.
No, I changed the alias' netmask, not the real one.
Hmm, I went through this before, and unless I added 1 ip from each block
with the real netmask, the ip wouldnt take.
FYI when my ISP sends me a new
In the last episode (Sep 15), Omer Faruk Sen said:
Is it possible in FreeBSD to rollback a snapshot that is done with
mksnap_ffs or with mount -o snapshot?
It seems that there is no way of doing that in FreeBSD am i right ?
Correct. The best you can do is dd or dumprestore the snapshot to a
The instructions say to use ad0 and ad1 as the /dev names but those
devices don't exist on my server. The device names are da0 and da1. I'd
be glad to post anything you wish, but I don't know what the dmesg is,
or how I get it. Can you tell me where I can get that information?
Jason
Andrea
Grant Peel wrote:
Hi All,
Now I am really confused.
Up until this morning I thought I had a good handle on when I need to
use the real Netmask and Broadcast.
For example, If I have 3 servers, and my upline asigns me a block of 128
addresses, for the first ip used (from this block) on each
Eric Schuele wrote:
Grant Peel wrote:
Hi All,
Now I am really confused.
Up until this morning I thought I had a good handle on when I need to
use the real Netmask and Broadcast.
For example, If I have 3 servers, and my upline asigns me a block of
128 addresses, for the first ip used
Kiffin Gish [EMAIL PROTECTED] writes:
Under the /usr/ports/x11/gnome2-power-tools, everything goes alright
until the last dependency for '/usr/ports/sysutils/eiciel' which bails
out with the error message:
-start-
libtool: link: `clipboard.lo' is not a valid libtool object
Ashley Moran wrote:
I have a 5.4-STABLE server that I've reconfigured to use syslog-ng
instead of syslogd. It collects logs from all our servers and sorts
them into per-host folders.
Our network admin showed me his gentoo machine earlier which uses ccze
to colour log files as they scroll
Hi,
Is there a way to make the kernel HALT the CPU regularly even
when it has got runnable processes? Sort of like increasing the idle
thread priority?
The problem is with one my computers which has a buggy CPU. No
matter how many or how powerful fans I install, when there's
a CPU usage of 100%
Alex Zbyslaw wrote:
The requirements like BEFORE: SERVERS are not honoured by scripts in
/usr/local/etc/rc.d. Try placing the script in /etc/rc.d calling it say
syslogng (i.e. without the .sh).
The BEFORE: doesn't bother me too much. I don't care enormously if I
lose a bit of logging. I
Andrea Venturoli wrote:
I used that tutorial on different machines and it has always worked.
Maybe you have to substitute da0 with something else, that depends on
your hardware. Can you provide a your dmesg at boot time?
bye
av.
Hi Jason:
1) please do NOT top post (i.e., don't reply @
Ashley Moran wrote:
Yes, syslog-ng is running fine (I'd already configured rc.conf like you
say). The problem is that it has a destination set up to pipe to the
program ccze, and that pipe doesn't work unless I restart syslog-ng
after boot time.
I've also tried moving the script into
On Sep 15, 2005, at 11:36 AM, Atis wrote:
Is there a way to make the kernel HALT the CPU regularly even
when it has got runnable processes? Sort of like increasing the idle
thread priority?
The problem is with one my computers which has a buggy CPU. No
matter how many or how powerful fans I
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jason King
Sent: Thursday, September 15, 2005 5:16 AM
To: freebsd-questions@freebsd.org
Subject: Software RAID1
I am having trouble with THESE instructions:
http://people.freebsd.org/~rse/mirror/
The instructions say to use ad0 and ad1 as the /dev names but those
devices don't exist on my server. The device names are da0 and da1. I'd
be glad to post anything you wish, but I don't know what the dmesg is,
or how I get it. Can you tell me where I can get that information?
ado,
Hi,
I wanted to create a custom FreeBSD 5.4, which will include my needed
packages, and the partition type(ie / , /var, /usr and the partition size) what
I prefix, this will not ask user with sysinstall options, if needed only root
password.
In short making my own distro.
I hope some
Norberto Meijome wrote:
Perhaps the ttyv7 isn't properly created until after all the local rc
scripts are run? That's all I can think.
you may want to edit the syslogng.sh to add some debug lines to see if
ttyv7 is up @ that point in time. based on the result of this, you may
want to
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Frank Bonnet
Sent: Thursday, September 15, 2005 7:12 AM
To: bannour souha
Cc: freebsd-questions@freebsd.org
Subject: Re: ntp problem :(
bannour souha wrote:
Hello,
I use a FreeBSD 5.3. I
So can I assume that these instructions will work with any device? I
realized that I didn't double check this:
especially in the
line for the boot loader where ad(1,a) -- da(1,a).
I didn't double check that. I'll follow through the instructions again
and make the correct change this time and
Ok, I made the correction and I'm still getting these errors:
mail# dd if=/dev/zero of=/dev/da0 bs=512 count=79
dd: /dev/da0: Operation not permitted
mail# gmirror configure -a gm0
mail# gmirror insert gm0 /dev/da0
Cannot access provider da0.
You can see from the above what section I am working
I'm building (or trying to build) an amd64 FreeBSD machine to replace my
FreeBSD 4.4 server. I purchased an ASUS Vintage-AE1 MB that uses the
following chipsets:
Northbridge: SiS760GX
Southbridge: SiS965L
I've not been able to get the on-board NIC to light up, so I purchased
another NIC
Here is the dmesg boot output
---
Copyright (c) 1992-2005 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD 5.4-RELEASE #0:
Also, I noticed that this command:
sed -e 's/dev\/ad0/dev\/mirror\/gm0/g' /mnt/etc/fstab.orig /mnt/etc/fstab
Doesn't seem to do anything to the fstab file on the second disk. Isn't it
suppose to be changing something?
Jason
Jerry McAllister wrote:
The instructions say to use ad0 and ad1 as
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jason King
Sent: Thursday, September 15, 2005 10:27 AM
To: Jerry McAllister
Cc: Andrea Venturoli; freebsd-questions@freebsd.org
Subject: Re: Software RAID1
Ok, I made the correction and I'm still
Appoligies:
Waiting 15 seconds for SCSI devices to settle
da0 at ahc0 bus 0 target 3 lun 0
da0: QUANTUM ATLAS10K3_36_SCA 020W Fixed Direct Access SCSI-3 device
da0: 160.000MB/s transfers (80.000MHz, offset 127, 16bit), Tagged Queueing
Enabled
da0: 35074MB (71833096 512 byte sectors: 255H 63S/T
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jason King
Sent: Thursday, September 15, 2005 10:37 AM
To: Jerry McAllister
Cc: Andrea Venturoli; freebsd-questions@freebsd.org
Subject: Re: Software RAID1
Also, I noticed that this command:
Man I'm a moron. That sed command was what was screwing me up. I
couldn't see the ad0 until you pointed it out. Thanks so much. I think
that's got it...the synchronization is going onright now.
Jason
Gayn Winters wrote:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL
Hi there,
I'm new on this list. I tried looking at the archive, but I didn't
know how to formulate my search. Here is my question:
I install a package using pkg_add. Then I try running the command, but
it doesn't work. I logout, I login, then it works. Is this a FAQ or a
setting?
In the last episode (Sep 15), Ugo Bellavance said:
I'm new on this list. I tried looking at the archive, but I
didn't know how to formulate my search. Here is my question:
I install a package using pkg_add. Then I try running the command,
but it doesn't work. I logout, I login, then
On Sep 15, 2005, at 7:23 AM, Frank Jahnke wrote:
My opinion on WINE is that it merely harms people who are writing
software
for FreeBSD. If I write a wordprocessor for Linux or FreeBSD and
try to
sell it, why would a customer buy it when he can just use his
Microsoft
Word under Wine?
Dan Nelson wrote:
In the last episode (Sep 15), Ugo Bellavance said:
I'm new on this list. I tried looking at the archive, but I
didn't know how to formulate my search. Here is my question:
I install a package using pkg_add. Then I try running the command,
but it doesn't work. I
Dan Nelson wrote:
In the last episode (Sep 15), Ugo Bellavance said:
I'm new on this list. I tried looking at the archive, but I
didn't know how to formulate my search. Here is my question:
I install a package using pkg_add. Then I try running the command,
but it doesn't work. I
Hmm, pinging from here I see that ntp.imag.fr = imag.imag.fr =
129.80.30.1 so if you can ping that address then you have low level
connectivity. One possibility is that something in the middle is
Apparently ntpdate is trying to use the IPv6 address that ntp.imag.fr publishes.
I don't know
I just did a release snapshot and everything worked except the last steps
creating the CD iso files. they simply don't exist. All of the supporting
files are in place and I can do a mkisofs and create a bootable working disk.
Can someone shed some light on how to get the script working? Here is
I have the following configuration:
CPU: AMD Sempron(tm) Processor 3100+ (1800.08-MHz 686-class CPU)
Origin = AuthenticAMD Id = 0xfc0 Stepping = 0
Features=0x78bfbffFPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2
AMD
Hello:
How do I cause freeBSD 5.4 to not respond to an nmap
inquiry? I have already tried creating a line in rc.firewall
that says:
${fwcmd} deny all from any to any
${fwcmd} drop all from any to any
I know these are active, since 1) I see them on the screen
at startup, and 2) pinging from any
Hi,
I want to replace a computer running FreeBSD 3.2 with one running FreeBSD
5.3. The 3.2 computer is currently used as a web server and a DNS server. I
have installed FreeBSD 5.3 and am currently adding the Apache2.50 port.
Once I add the Apache web server and Bind, can I then just copy
On Sep 15, 2005, at 11:43 AM, Boris Karloff wrote:
Hello:
How do I cause freeBSD 5.4 to not respond to an nmap
inquiry? I have already tried creating a line in rc.firewall
that says:
${fwcmd} deny all from any to any
${fwcmd} drop all from any to any
I know these are active, since 1) I see
Hi,
I want to replace a computer running FreeBSD 3.2 with one running FreeBSD
5.3. The 3.2 computer is currently used as a web server and a DNS server.
I
have installed FreeBSD 5.3 and am currently adding the Apache2.50 port.
Once I add the Apache web server and Bind, can I then just copy
On Sep 15, 2005, at 11:47 AM, Lisa Casey wrote:
Hi,
I want to replace a computer running FreeBSD 3.2 with one running
FreeBSD 5.3. The 3.2 computer is currently used as a web server and
a DNS server. I have installed FreeBSD 5.3 and am currently adding
the Apache2.50 port.
Once I add
Beecher Rintoul wrote:
I just did a release snapshot and everything worked except the last steps
creating the CD iso files. they simply don't exist. All of the supporting
files are in place and I can do a mkisofs and create a bootable working disk.
Can someone shed some light on how to get
Lisa Casey wrote:
Hi,
I want to replace a computer running FreeBSD 3.2 with one
running FreeBSD 5.3. The 3.2 computer is currently used as
a web server and a DNS server. I have installed FreeBSD 5.3
and am currently adding the Apache2.50 port.
Once I add the Apache web server and Bind, can I
depending on your shell, you may need to type rehas - then it will see
the command. If you use bash, it should 'just work'
On Thu, 2005-09-15 at 12:35 -0400, Ugo Bellavance wrote:
Hi there,
I'm new on this list. I tried looking at the archive, but I didn't
know how to formulate my
[EMAIL PROTECTED] writes:
So I have an odd problem with a FreeBSD box of mine.
It's a 6.0 Beta3 box upgraded from 5.4 and it can't seem to
run make buildworld and only make buildworld. I can run \
make cleandir make cleanworld even make kernel. I
can build other things from the ports
Sorry I can't continue this as a thread -- I get this as a digest and
unless I'm copied, I can't.
My opinion on WINE is that it merely harms people who are writing
software
for FreeBSD. If I write a wordprocessor for Linux or FreeBSD and
try to
sell it, why would a customer buy it when he
On Wed, Sep 14, 2005 at 05:58:11PM -0500, J French wrote:
I need to install JBoss for some development and want to use FreeBSD but the
Java binary issue concerns me. Is the patchset at
http://www.eyesbeyond.com/freebsddom/java/jdk15.html robust enough for
production?
The JDK1.5 patchset is
I'm using FreeBSD 6.0-BETA4 and I'm having some troubles with
X.orghttp://X.orgxonfiguration, I have a SiS 630/730 video card and
my mouse doesn't work on
console. When I launch startx the screen goes blank and the machine
reboots.
This is my xorg.conf file.
Thanks!
Section ServerLayout
On Sep 15, 2005, at 2:43 PM, Boris Karloff wrote:
How do I cause freeBSD 5.4 to not respond to an nmap
inquiry? I have already tried creating a line in rc.firewall
that says:
${fwcmd} deny all from any to any
${fwcmd} drop all from any to any
I know these are active, since 1) I see them on the
I have three adjacent disk partitions as reported by
bsdlabel.
ad0s1g /local
ad0s1b swap
ad0s1h /home
/local is at around 107% full all the time and needs to
grow. /home is nearly empty ( new machine).
What I want to do is combine ad0s1g and h into
a new /local and add another
Jason King wrote:
The instructions say to use ad0 and ad1 as the /dev names but those
devices don't exist on my server. The device names are da0 and da1. I'd
be glad to post anything you wish, but I don't know what the dmesg is,
or how I get it. Can you tell me where I can get that information?
Hello.
I'm student from Latvia. I'd like to ask you a question about Postfix
mail system under FreeBSD.
I have such problem: target is to allow user to change his mail
account's password by himself. For example, I set password for his
account, and maybe, user doesn't want me to know this password,
Hi,
I want to replace a computer running FreeBSD 3.2 with one running FreeBSD
5.3. The 3.2 computer is currently used as a web server and a DNS server. I
have installed FreeBSD 5.3 and am currently adding the Apache2.50 port.
Once I add the Apache web server and Bind, can I then just
Hello
I'm trying to build a web server with FreeBSD 4.11 that runs off of a
CD rather than a hard disk. I'm trying to make an iso using livecd 1.2.4b
and the install goes well, but when I try to boot the system from the iso
I get the mountroot prompt.
Here is the fstab file that I
On Sep 15, 2005, at 12:40 PM, Guillermo Garcia-Rojas wrote:
I'm using FreeBSD 6.0-BETA4 and I'm having some troubles with
X.orghttp://X.orgxonfiguration, I have a SiS 630/730 video card and
my mouse doesn't work on
console. When I launch startx the screen goes blank and the machine
reboots.
On Sep 15, 2005, at 4:17 PM, Midnight Oil wrote:
Here is the fstab file that I put in the live_root install
directory
prior to the iso generation:
# DeviceMountpoint FStype Options Dump
Pass#
/dev/ad0s1b noneswapsw
0
On Thu, 15 Sep 2005, Charles Swiger wrote:
On Sep 15, 2005, at 4:17 PM, Midnight Oil wrote:
Here is the fstab file that I put in the live_root install
directory
prior to the iso generation:
# DeviceMountpoint FStype Options Dump
Pass#
/dev/ad0s1b
I don't know if this is the right list, but here goes:
I'm having trouble with an ipsec implementation. The ipsec part works
fine, but now that it's set up, mail does not pass between the machines in
question. I have set up ipsec on two machines, both connected to the
internet. Machine A is
On Wednesday 14 September 2005 11:21 pm, Ted Mittelstaedt wrote:
Let's quit beating around the bush, shall we? The only vendor that
custom tailors their content to IE and who will not correct gross
HTML coding errors on their website and in their products is Microsoft.
Everybody else, if
hal wrote:
I have three adjacent disk partitions as reported by
bsdlabel.
ad0s1g /local
ad0s1b swap
ad0s1h /home
[snip]
would rather resize/combine the three partitions into two.
How can I do that (short of a reinstall)?
ccd(4) might help (and see
On Sat, Sep 10, 2005 at 11:42:29AM -0400, WOB wrote:
Other games were client-server based, and it wasn't immediately
obvious how to get them running.
Free, open-source games are hard to write in the first place, and so
they tend to have poor documentation.
A few games just core dump, like
Alexander Bogdanov wrote:
Hello.
I'm student from Latvia. I'd like to ask you a question about Postfix
mail system under FreeBSD.
I have such problem: target is to allow user to change his mail
account's password by himself. For example, I set password for his
account, and maybe, user doesn't
On Tue, Sep 13, 2005 at 02:14:15PM +0200, [EMAIL PROTECTED] wrote:
ok.
It's the base of the IBM Active Protection System (APS).
At the moment there is NO protection of any kind
but you can use it as an input device for X. (I get a slow right drift after
heavy use)
... so, you jiggle your
Alex Zbyslaw wrote:
Norberto Meijome wrote:
Perhaps the ttyv7 isn't properly created until after all the local rc
scripts are run? That's all I can think.
you may want to edit the syslogng.sh to add some debug lines to see if
ttyv7 is up @ that point in time. based on the result of this,
On Mon, 16 May 2005, Gerard Seibert wrote:
I am running FreeBSD 5.4. This is a new installation.
I am unable to get kde3 (meta port) installed. It hangs after almost a day of
compiling.
(cd /usr/ports/print/cmpsfont/work/cmpsfont/pfb; /usr/local/bin/type1inst
-nolog)
*** Error code 127
1 - 100 of 115 matches
Mail list logo
