Hi,
I'm following the 9-STABLE branch with svn and just updated my system. But
after booting I noticed that my system is still at 9.1-PRERELEASE, and not
9.1-STABLE or 9-STABLE.
Does someone know what happened?
Thanks in advance.
Regards,
Marco
--
To get something done, a committee should
On Mon, 30 Jul 2012, the wise david coder wrote:
same problem. so i rebuilt png w/
OPTIONS= APNG Animated PNG support On
firefox build still fails because of complaints about APNG. what am i
missing here?
i'm running 8.3, btw, less than a month old.
david coder
My guess is
Hi,
I noticed some messages when booting:
...
link_elf: symbol ata_controlcmd undefined
KLD file atapicam.ko - could not finalize loading
...
My /boot/loader.conf includes:
...
atapicam_load=YES
hw.ata.atapi_dma=1
...
Entering kldload atapicam gives:
kldload: can't load atapicam: No such file
On Fri, 13 Apr 2012, the wise Polytropon wrote:
In FreeBSD 9, loading atapicam should not be neccessary,
as it is now part of the GENERIC kernel and has merged
the ATA and SCSI functionality for disks and optical
devices. Try removing it from loader.conf and try again.
(Note possible device
Hi,
When booting my computer today I noticed the message at the end: starting
background filesystem check in 60 seconds. This seems strange to me since
SU+J is enabled on all filesystems. How is this possible? NB running
FreeBSD 9-STABLE
Regards,
Marco
--
In most instances, all an argument
Hi,
I noticed that my Intel 82541GI gigabit ethernet controller uses a legacy
driver 1.0.3, instead of the in 9.0 standard em0 driver 7.3.2.
Why is this and is the legacy driver as good as the standard driver?
Regards,
Marco
--
The road to Hades is easy to travel.
-- Bion
On Sun, 15 Jan 2012, the wise Erik Nørgaard wrote:
Don't use ipv6, but reading above: Did you replace ipv6_enable with
ipv6_activate_all_interfaces? because the error seems to tell you that you
must keep ipv6_enable
I replaced it with the new lines because according to the manpage
On Sun, 15 Jan 2012, the wise Erik Nørgaard wrote:
Don't use ipv6, but reading above: Did you replace ipv6_enable with
ipv6_activate_all_interfaces? because the error seems to tell you that
you must keep ipv6_enable
I replaced it with the new lines because according to the manpage
ipv6_enable
On Fri, 13 Jan 2012, the wise Mark Blackman wrote:
On 13 Jan 2012, at 16:30, Marco Beishuizen wrote:
Hi,
I just upgraded from 8-STABLE to 9-STABLE on my dual Xeon (nocona). Now I have
in my boot messages:
...
root: /etc/rc.d/sysctl: WARNING: sysctl machdep.hlt_logical_cpus does not exist
Hi,
In 8.2 ipv6 was enabled by adding ipv6_enable=YES in rc.conf, and all
worked fine. In FreeBSD 9 that changed to
ipv6_activate_all_interfaces=YES. But now there are still some error
messages at boot time, and ipv6 doesn't seem to work correctly:
...
root: /etc/rc: WARNING:
On Sat, 14 Jan 2012, the wise Yuri Pankov wrote:
In 8.2 ipv6 was enabled by adding ipv6_enable=YES in rc.conf, and all
worked fine. In FreeBSD 9 that changed to
ipv6_activate_all_interfaces=YES. But now there are still some error
messages at boot time, and ipv6 doesn't seem to work correctly:
Hi,
I just upgraded from 8-STABLE to 9-STABLE on my dual Xeon (nocona). Now I
have in my boot messages:
...
root: /etc/rc.d/sysctl: WARNING: sysctl machdep.hlt_logical_cpus does not
exist.
root: /etc/rc.d/sysctl: WARNING: sysctl machdep.hyperthreading_allowed
does not exist.
...
So isn't
On Sun, 8 Jan 2012, the wise Polytropon wrote:
Does this image boot successfully?
Unfortunately this is also a no go. I think Intel has done something
special to their iso's, considering that I'm missing 7MB of data.
Regards,
Marco
--
Men have as exaggerated an idea of their
rights as
On Sun, 8 Jan 2012, the wise Polytropon wrote:
If this is depending on the name [BOOT], there are
two ways to deal with special characters in file names,
if you need to specify them on the command line:
a) use escape sequences:
-b \[BOOT\]/Bootable_HardDisk.img
b) use quoting:
On Sun, 8 Jan 2012, the wise Polytropon wrote:
Does this image boot successfully?
I don't know yet because I've used all my cd-r's :-(.
Within a few days I'm expecting some new cd-rw's and I'll let you know how
things went.
If you compare your ISO with the original one, file sizes
should
Hi,
I have an Intel SRCU42X raid controller that currently has firmware
version 414D. The bios flash was done by a system update package, from
Intel which is an iso file that you can burn to a cd. The upgrade to 414D
went fine.
But the newest firmware version is 414I and is not available as
Hi,
Gthumb core dumps with:
...
IRQ's not enabled, falling back to busy waits: 2 0
Segmentation fault (core dumped)
...
Does anyone know what this means?
Thanks in advance,
Marco
--
Fortune's Real-Life Courtroom Quote #41:
Q: Now, Mrs. Johnson, how was your first marriage terminated?
A:
On Mon, 5 Sep 2011, the wise Коньков Евгений wrote:
may be you have a problem with firewall.
try
#traceroute IP or name
Traceroute gives:
...
traceroute vpn-eur-pptp.eur.nl
traceroute: Warning: vpn-eur-pptp.eur.nl has multiple addresses; using
130.115.3.35
traceroute to vpn-eur-pptp.eur.nl
On Mon, 5 Sep 2011, the wise Scott Ballantyne wrote:
Stop in /usr/ports/graphics/gtk-update-icon-cache.
*** Error code 1
Stop in /usr/ports/graphics/gtk-update-icon-cache.
*** Error code 1
Try deinstalling and reinstalling gtk-update-icon-cache first.
Regards,
Marco
--
My father was a
On Mon, 5 Sep 2011, the wise Коньков Евгений wrote:
As I have so, you
1. Successfully connect to university
MB ng0: flags=88d1UP,POINTOPOINT,RUNNING,NOARP,SIMPLEX,MULTICAST metric 0
MB mtu 1456
MB inet 130.115.77.12 -- 130.115.3.34 netmask 0x
MB inet6
On Sat, 3 Sep 2011, the wise Коньков Евгений wrote:
Please describe your networks fully
also I ask to send output of:
ifconfig
netstat -nr
My computer has IP 192.168.1.11, and sits behind a ADSL router which has
IP 192.168.1.1, the router is the gateway to the internet. IP adresses are
On Fri, 2 Sep 2011, the wise Коньков Евгений wrote:
set iface route 130.115.0.0/16
you say that behind tunnele thereis 130.115.0.0/16 subnet, but
MB [B1] 130.115.85.11 - 130.115.3.35
you have address from subnet 130.115.0.0/16 addres on local machine
so you get this message:
MB Loop detected
On Thu, 1 Sep 2011, the wise Коньков Евгений wrote:
Notice: [B1] IFACE: Add route 0.0.0.0/0 130.115.3.34 failed: File exists
You already have default route in your system
why you set up the default again?
Notice in conf:
set iface route default
With help from Mike Tancsa I've changed the
On Wed, 31 Aug 2011, the wise krad wrote:
have you tried mpd? I always found pptpclient a bit prone to issues
http://www.freebsd.org/doc/handbook/pppoa.html
Yes I did some time ago, but I found it so complicated that I never got it
working. Pptpclient seems a lot simpler so I wanted to try
On Wed, 31 Aug 2011, the wise Mike Tancsa wrote:
use mpd5 from the ports. It is well supported and works very well both
as a client and server.
There is a sample config in the mpd.conf.example where all you need to
do is change the userid and passwd and server IP...
pptp_client:
#
# PPTP
Hi,
I'm trying to set up a vpn connection to the university library by using
pptpclient. In other OS's this takes around 10 seconds, but in FreeBSD
this seems very difficult to do, and I've no idea why. It looks like
there is a connection made, but after a minute or two it just disconnects
Hi,
When I start LyX I'm getting an error:
...
terminate called after throwing an instance of 'std::runtime_error'
what(): locale::facet::_S_create_c_locale name not valid
Abort (core dumped)
...
This seems to have something to do with my locale settings:
...
LANG=en_US.UTF-8
On Sun, 19 Dec 2010, Jud wrote:
Apologies for top-post.
Because many other ports depend on icu, it might be preferable to update
everything at the same time rather than piecemeal:
# portupgrade -rf icu-\*
Caution: This'll take a while.
Jud
This is what I did, but then several ports
On Fri, 17 Dec 2010, Steven Friedrich wrote:
I even tried portupgrade -fR avahi-app.
Here's the last of the log:
...
/libexec/ld-elf.so.1: Shared object libicui18n.so.38 not found, required by
libavahi-glib.so.1
...
I'm having this too. I think this happens because the portupgrade of
On Thu, 25 Nov 2010, Da Rock wrote:
Perhaps try using WITH_OPENSSL_BASE=YES in make.conf? You would probably have
to rebuild other ports as well, but I'm sure someone else here could confirm
that.
HTH
Ekiga seems to be the problem here. Ekiga wants to install opal, and opal
wants to
After trying to upgrade my ports, pwlib seems broken again:
...
../../ptclib/pssl.cxx: In constructor 'PSSLContext::PSSLContext(const
void*, PINDEX)':
../../ptclib/pssl.cxx:917: error: invalid conversion from 'const
SSL_METHOD*' to 'SSL_METHOD*'
gmake[3]: ***
Hi,
I have a problem building evolution-data-server, and because of this a
number of other ports don't build/upgrade either.
...
gmake[4]: Entering directory
`/usr/ports/databases/evolution-data-server/work/evolution-data-server-2.32.1/camel'
CC
On Sat, 16 Oct 2010, Marco Beishuizen wrote:
Hi,
I tried to run chromium as browser today but it crashes immediately:
...
[1016/211130:WARNING:base/debug_util_posix.cc(228)] Don't know how to do this
The program 'chrome' received an X Window System error.
This probably reflects a bug
Hi,
I tried to run chromium as browser today but it crashes immediately:
...
[1016/211130:WARNING:base/debug_util_posix.cc(228)] Don't know how to do
this
The program 'chrome' received an X Window System error.
This probably reflects a bug in the program.
The error was 'BadAccess (attempt to
On Tue, 6 Jul 2010, Dan Nelson wrote:
CA Roots are also self-signed, btw :) Addtrust is a valid CA Root, and is
the root for some certificates signed by Network Solutions and Comodo (and
probably others). Marco, the fetchmail manpage mentions a --sslcertfile
option; try adding --sslcertfile
On Sun, 4 Jul 2010, Dan Nelson wrote:
Probably harmless, unless someone has forged a certificate chain using a
fake AddTrust External CA Root cert at the top. Installing the
security/ca_root_nss port (make sure you enable the ETCSYMLINK option) will
probably silence it.
I installed
Hi,
I'm seeing in my logfiles a lot of messages like these from fetchmail:
Jul 3 22:02:54 yokozuna fetchmail[1437]: Server certificate verification
error: self signed certificate in certificate chain
Jul 3 22:02:54 yokozuna fetchmail[1437]: This means that the root signing
certificate
Hi,
I'm having a strange network problem. Every day, when I turn on my
computer, fetchmail is started and procmail is putting all my mail in the
correct mailboxes. This takes some time because I receive a few hundred
e-mails a day (mostly mailing lists).
The strange thing is that when the
On Wed, 19 May 2010, Chuck Swiger wrote:
Are you using NAT?
Not that I know of.
It sounds like something has a limited number of NAT state slots
available, and is dropping connections past that limit. It probably
will help to try to serialize the activity of fetchmail / procmail so
that
On Wed, 5 May 2010, Lowell Gilbert wrote:
You seem to have a bunch of unique problems. Have you customized your
compiler usage? Do you have any settings in make.conf or other
relevant /etc files?
I've never done anything to compiler settings afaik. My /etc/make.conf
looks like this:
On Wed, 5 May 2010, Lowell Gilbert wrote:
Has anyone an idea what's the problem here?
You seem to have a bunch of unique problems. Have you customized your
compiler usage? Do you have any settings in make.conf or other
relevant /etc files?
This one seems solved. It seems that libkde4
On Tue, 4 May 2010, Marco Beishuizen wrote:
./kopenssl.h:532: error: 'STACK' has not been declared
./kopenssl.h:538: error: 'STACK' has not been declared
./kopenssl.h:544: error: expected ';' before '(' token
./kopenssl.h:550: error: ISO C++ forbids declaration of 'STACK' with no type
Hi,
After the X.org upgrade to 7.5, xfs fails to upgrade:
=== Building for xfs-1.1.0,1
make all-am
/usr/local/bin/xmlto -m ./doc/xfs-design.xsl -o doc pdf
./doc/xfs-design.xml
Making portrait pages on letter paper (215.9mmx279.4mm)
This is pdfeTeX, Version 3.141592-1.21a-2.2 (Web2C 7.5.4)
Hi,
Compiling kdelibs3 exits with:
In file included from kssl.cc:47:
./kopenssl.h:453: error: ISO C++ forbids declaration of 'ASN1_METHOD' with
no type
./kopenssl.h:453: error: expected ';' before '*' token
./kopenssl.h:526: error: expected ';' before '(' token
./kopenssl.h:532: error:
Hi,
I'm getting an error compiling kdelibs4:
/usr/local/include/qptrlist.h: In copy constructor
'QPtrListtype::QPtrList(const QPtrListtype) [with type =
QDBusSignature]':
/usr/local/include/qt4/QtCore/qmetatype.h:138: instantiated from 'void*
qMetaTypeConstructHelper(const T*) [with T =
On Fri, 30 Apr 2010, Warren Block wrote:
On Thu, 29 Apr 2010, Marco Beishuizen wrote:
On Thu, 29 Apr 2010, Warren Block wrote:
One more problem: there should be a quote at the end of the last line.
attach 100 {
device-name ugen[0-9].[0-9];
match vendor 0x04b8;
match
On Wed, 28 Apr 2010, Warren Block wrote:
You can use devd.conf for this:
attach 100 {
device-name ugen[0-9].[0-9];
match vendor 0x04b8;
match product 0x010a;
action usb_devaddr=`echo $device-name | sed 's#^ugen##'` \
chown root:saned
On Thu, 29 Apr 2010, Warren Block wrote:
For the sake of completeness: devd has to be restarted after changes to
devd.conf, and the code above is only executed when the scanner is detected
(USB cable plugged in or scanner powered on).
I rebooted and plugged in the scanner but no changes.
On Thu, 29 Apr 2010, Warren Block wrote:
One more problem: there should be a quote at the end of the last line.
attach 100 {
device-name ugen[0-9].[0-9];
match vendor 0x04b8;
match product 0x010a;
action usb_devaddr=`echo $device-name | sed 's#^ugen##'` \
Hi,
I have a flatbed scanner (a HP ScanJet 4400c) that works with SANE (and
Xsane), but only as root and I want to access it as user. After some
googling and reading the handbook I copied the default file
/etc/defaults/devfs.rules to /etc/ and added the lines:
[system=5]
add path 'ugen*'
On Wed, 28 Apr 2010, Roland Smith wrote:
Are the permissions correct? Check with 'ls -l /dev/usb/ /dev/ugen*'.
Is your user-id in the usb group? Check by running 'id' as the normal user.
If all that is in order, remove all lines except the three above from
/etc/devfs.rules, and try again.
Hi,
I tried to portupgrade firefox from 3.6.2 to 3.6.3 (on FBSD 8.0-ST). It
fails with:
...
../../../../other-licenses/ply/ply/yacc.py:74: DeprecationWarning: the md5
module is deprecated; use hashlib instead
import re, types, sys, cStringIO, md5, os.path
gmake[4]: *** [dom_quickstubs.cpp]
On Sun, 18 Apr 2010, Marco Beishuizen wrote:
Hi,
I tried to portupgrade firefox from 3.6.2 to 3.6.3 (on FBSD 8.0-ST). It
fails with: ... ../../../../other-licenses/ply/ply/yacc.py:74:
DeprecationWarning: the md5 module is deprecated; use hashlib instead
import re, types, sys, cStringIO, md5
On Thu, 1 Apr 2010, Dino Vliet wrote:
Error: Files /usr/local/lib/ocaml/facile/facile.cmxa
and /usr/local/lib/ocaml/stdlib.cmxa
make inconsistent assumptions over interface Buffer
*** Error code 2
You have to reinstall facile first, and then upgrade kdeedu. I had the
same problem
Hi,
Fot the first time in years I had a kernel panic in FreeBSD (8.0-ST).
While playing a flash movie in Firefox (3.6), everything just locked up
and only resetting helped. After the reboot it wrote a corefile in
/var/crash/ which is unfortunately too big to read by any text editor. The
trap
On Sat, 13 Feb 2010, Marco Beishuizen wrote:
Hi,
Since the update of SpamAssassin to 3.3.0, spamd doesn't start anymore and
exits with an error:
child process [x] exited or timed out without signaling production of a
PID file: exit 25 at /usr/local/bin/spamd line 2544.
It seems
Hi,
Since the update of SpamAssassin to 3.3.0, spamd doesn't start anymore
and exits with an error:
child process [x] exited or timed out without signaling production of
a PID file: exit 25 at /usr/local/bin/spamd line 2544.
It seems that after the upgrade, sa-update has to be run
On Fri, 15 Jan 2010, Marco Beishuizen wrote:
Hi,
When trying to portupgrade sound-juicer I get:
...
/usr/bin/ld: warning: libssl.so.5, needed by /usr/local/lib/libneon.so, may
conflict with libssl.so.7
/usr/lib/libkrb5.so: undefined reference to `hx509_certs_init'
/usr/lib/libkrb5.so
Normally when a program crashes, it places a .core file in the
homefilesystem. Is there a way of changing the filesystem where FreeBSD
places it's core dumps?
Thanks in advance,
Marco
--
Rule #7: Silence is not acquiescence.
Contrary to what you may have heard, silence of those
On Sun, 17 Jan 2010, RW wrote:
On Sat, 16 Jan 2010 23:23:52 +0100 (CET)
Marco Beishuizen mb...@xs4all.nl wrote:
Normally when a program crashes, it places a .core file in the
homefilesystem. Is there a way of changing the filesystem where
FreeBSD places it's core dumps?
cd to another
On Sun, 17 Jan 2010, Yuri Pankov wrote:
Check core(5).
HTH,
Yuri
Thanks, this is what I was looking for.
Regards,
Marco
--
Never argue with a woman when she's tired -- or rested.
___
freebsd-questions@freebsd.org mailing list
Hi,
When trying to portupgrade sound-juicer I get:
...
/usr/bin/ld: warning: libssl.so.5, needed by /usr/local/lib/libneon.so,
may conflict with libssl.so.7
/usr/lib/libkrb5.so: undefined reference to `hx509_certs_init'
/usr/lib/libkrb5.so: undefined reference to
Gnupg exits with the following error when portupgrading it:
...
gpg2keys_ldap-gpgkeys_ldap.o(.text+0xd09): In function `send_key':
: undefined reference to `ascii_isspace'
gmake[2]: *** [gpg2keys_ldap] Error 1
gmake[2]: Leaving directory
`/usr/ports/security/gnupg/work/gnupg-2.0.14/keyserver'
Hi,
I upgraded the radeonhd driver from 1.2.5 to 1.3.0. It seems to work fine,
except when moving a window. As far as I can see all other actions like
scrolling or resizing is quick, but moving windows goes really slow.
In my xorg.conf the modules extmod, record, dbe, glx, dbi and
dbi2 are
On Mon, 7 Dec 2009, George Liaskos wrote:
Give x11-drivers/xf86-video-ati a try
http://lists.freebsd.org/pipermail/freebsd-x11/2009-December/009093.html
What are the differences between the ati and the radeonhd driver? Is the
ati-driver for all Ati cards and the radeonhd specifically for
On Mon, 7 Dec 2009, Marco Beishuizen wrote:
Hi,
I upgraded the radeonhd driver from 1.2.5 to 1.3.0. It seems to work fine,
except when moving a window. As far as I can see all other actions like
scrolling or resizing is quick, but moving windows goes really slow.
In my xorg.conf
Hi,
When I use GDM for logging in, the only possible users I can choose from
are the logcheck system account and other, but not my regular user
account. Why is that?
Marco
--
Only way to open lips of pigeon, sledgehammer.
___
On Mon, 11 May 2009, Giorgos Keramidas wrote:
FWIW, the gdm user list applet seems to be having a few problems in
8.0-CURRENT too.
It is auto-enabled when procfs(5) is mounted at `/proc' but it only
shows `other' a few dozen times on my laptop, and clicking on them
sometimes crashes gdm. I'm
Hi,
I cvsupped my portstree yesterday and updated my system with portupgrade -a.
All went well except for logcheck. Since the cvsup I don't receive the normal
hourly mail with the results of the checking in my mailbox but the following
(the subject of the mail is: Cron logch...@yokozuna if
[
On Saturday 14 March 2009 14:35:36 Patrick Lamaizière wrote:
Le Sat, 14 Mar 2009 10:48:58 +0100,
Marco Beishuizen mb...@xs4all.nl:
I cvsupped my portstree yesterday and updated my system with
portupgrade -a. All went well except for logcheck. Since the cvsup I
don't receive the normal
On Sat, 07 Feb 2009 19:35:43 -0500
Aryeh M. Friedman aryeh.fried...@gmail.com wrote:
Did you recompile OO after installing xorg-7.4?
Yes, xorg was updated some days ago. I upgraded OO yesterday.
--
The only thing better than love is milk.
___
Hi,
Trying to run OO-3.0.1 crashes OO with the following error messages and
ends into and enless loop trying to restart and crashing again:
...
(soffice:2726): Gtk-WARNING **: GtkSpinButton: setting an adjustment
with non-zero page size is deprecated Xlib: extension Generic Event
Extension
On Fri, 26 Dec 2008 18:14:38 +
af300...@gmail.com wrote:
Hi,
For several reasons, one of which was to use the nvidia driver for
my board, I switched from amd64 to i386. So, I installed the driver
and although things are working I'm getting this on console 0:
NVRM: AGP cannot be
On Tue, 14 Oct 2008 09:35:55 -0700
Jeremy Chadwick [EMAIL PROTECTED] wrote:
The Range Not Satisfiable errors are because your db-4.2.52.tar.gz
is of an incorrect size (probably larger than what's on the source
site). The last error (talking about modification time) could
indicate that you
Hi,
In an attempt to upgrade db42 to db47 I seem to have broken some
things. If I try to portupgrade anything I get:
...
#portupgrade -a
** Makefile possibly broken: www/gnome-user-share:
/libexec/ld-elf.so.1: Shared object libdb-4.2.so.2 not found,
required by libaprutil-1.so.3 [: -le:
On Tue, 14 Oct 2008 08:06:46 -0700 (PDT)
mdh [EMAIL PROTECTED] wrote:
Have you tried installing db42 from ports manually? ie:
(cd /usr/ports/databases/db42 make deinstall make clean make
install make clean)
If that doesn't work, perhaps try installing the db42 pkg from the
FreeBSD ftp
On Sun, 14 Sep 2008 13:00:47 -0400
Greg Larkin [EMAIL PROTECTED] wrote:
Finally, I'll add the members of the wheel group to the logcheck group
so anyone in that group can still read the file as they could before:
On Sun, 14 Sep 2008 21:34:48 +0200
Marco Beishuizen [EMAIL PROTECTED] wrote:
When trying to add root and marco to the logcheck group I get:
...
#grep ^wheel: /etc/group | awk -F : '{ print $4 }' | xargs \ -n1 pw
groupmod logcheck -m
#xargs: -n1: No such file or directory
...
Should I
On Sun, 14 Sep 2008 13:00:47 -0400
Greg Larkin [EMAIL PROTECTED] wrote:
Now the logcheck, root, and glarkin user can all
read /var/log/auth.log, and the logcheck script should work fine. I
hope that clears everything up. If you have any further questions or
problems, please post back here.
On Fri, 12 Sep 2008 18:02:37 -0400
Greg Larkin [EMAIL PROTECTED] wrote:
Hi Marco,
Right you are! In fact, after my initial logcheck commit, someone
opened a PR stating something very similar to what you noted:
http://www.freebsd.org/cgi/query-pr.cgi?pr=ports/127255
The submitter's point
Hi,
After upgrading logcheck from 1.1.1 to 1.2.54 I suddenly get errors of
logcheck not working correctly:
...
Warning: If you are seeing this message, your log files may not have
been checked!
Details:
Could not run logtail or save output
Check temporary directory: /tmp/logcheck.6IZZmq
Also
Hi,
My hald is crashing constantly. It's started when booting by rc.conf and
then it crashes immediately with no further error messages. It crashes
also when I start it manually. The problem is quite severe because it
even caused two kernel panics.
I'm running 7.0-Stable and the hal version is
On Wed, 14 May 2008 22:36:49 +0200
Marco Beishuizen [EMAIL PROTECTED] wrote:
Hi,
My hald is crashing constantly. It's started when booting by rc.conf
and then it crashes immediately with no further error messages. It
crashes also when I start it manually. The problem is quite severe
Hi,
When I try to install OO from the ports I get the message Environment
error: JAVA_HOME should not be defined.
Does anyone know how to get rid of this?
Thanks,
Marco
--
Alas, I am dying beyond my means.
-- Oscar Wilde [as he sipped champagne on his deathbed]
On Tue, 29 Apr 2008 20:27:47 -0300
Mario Lobo [EMAIL PROTECTED] wrote:
unset JAVA_HOME
make install
Yes, this seems to work. Thanks.
Marco
--
If the weather is extremely bad, church attendance will be down.
If the weather is extremely good, church attendance will be down.
If the bulletin
On Sat, 19 Apr 2008 11:24:34 +0200
Mel [EMAIL PROTECTED] wrote:
Anything useful come up when you put rc_debug=YES in there?
Gutshot guess, the polkitd_enable is missing.
I've attached the messages at startup with rc_debug=YES in my
rc.conf. I've also enabled the polkitd, but it says nothing
On Sat, 19 Apr 2008 02:07:09 +0200
Marco Beishuizen [EMAIL PROTECTED] wrote:
Hi,
Since I upgraded to 7.0, it seams that my /etc/rc.conf isn't read
anymore at startup. At least partly. Things that do not start anymore
are:
- oss
- dbus
- hald
- avahi
They are all gnome related. I have
On Sat, 19 Apr 2008 07:44:59 -0600
Eric [EMAIL PROTECTED] wrote:
are you changing the kernel security level in your rc.conf file? if
so, comment it out and reboot. that was an issue i had on a 6.x box
recently and commenting out the security level change fixed it
No, I didn't change that.
On Sat, 19 Apr 2008 07:44:59 -0600
Eric [EMAIL PROTECTED] wrote:
are you changing the kernel security level in your rc.conf file? if
so, comment it out and reboot. that was an issue i had on a 6.x box
recently and commenting out the security level change fixed it
When I do a sysctl -a | grep
On Sat, 19 Apr 2008 17:20:36 +0300
Manolis Kiagias [EMAIL PROTECTED] wrote:
securelevel -1 is fine. This is the default:
quote from init(8):
-1Permanently insecure mode - always run the system in level 0
mode. This is the default initial value.
Your problem lies elsewhere. I've
On Sat, 19 Apr 2008 17:40:13 +0300
Manolis Kiagias [EMAIL PROTECTED] wrote:
Ah!!! It just clicked! You got a lot of _enable=NO
This is rather unusual - you usually override something from
/etc/defaults/rc.conf with a YES
Your /etc/defaults/rc.conf has missing entries. It probably was not
Hi,
Since I upgraded to 7.0, it seams that my /etc/rc.conf isn't read
anymore at startup. At least partly. Things that do not start anymore
are:
- oss
- dbus
- hald
- avahi
They are all gnome related. I have in my rc.conf: oss_enable=YES,
hald_enable=YES, avahi_daemon_enable=YES and
Hi,
I'm having trouble getting things printed in Gnome. CUPS is installed and
printing a test from localhost:631 is working fine. In the gnome-cups-
manager the printer is showing.
But when I try to print a test from the gnome-cups-manager I get a message
that it's printed and the led on the
On 27-Feb-2008 20:29:43, Predrag Punosevac wrote:
You have to adjust the preferences. By default most applications will
print to Post Script file.
You have to put something like lpr or to change default printer.
Try to print a PostScript file from the shell with
$lpr -Pprintername
Hi,
Installing LyX 1.5.1 from ports gives the following error during
compiling (on 6.2-Stable):
...
filetools.cpp:416: error: `fs::filesystem_error' has not been declared
filetools.cpp:416: error: invalid catch parameter
filetools.cpp:416: error: expected `)' before const
filetools.cpp:416:
On Mon, 24 Sep 2007, Mel wrote:
Q: Do you have linux-jdk installed rather then diablo-jdk?
No, the FreeBSD jdk15 is installed.
--
What George Washington did for us was to throw out the British, so
that we wouldn't have a fat, insensitive government running our
country. Nice try anyway,
On Mon, 24 Sep 2007, Mel wrote:
On Monday 24 September 2007 18:20:44 Marco Beishuizen wrote:
On Mon, 24 Sep 2007, Mel wrote:
Q: Do you have linux-jdk installed rather then diablo-jdk?
No, the FreeBSD jdk15 is installed.
Ah, it uses GCC 4.2, which has libstdc++ v6. -stable has v5. Did
On Mon, 24 Sep 2007, Mel wrote:
But libstdc++.so.6 isn't under /usr/local, it's under
/usr/compat/linux/usr/lib.
what's the output of:
ls /var/db/pkg|grep gcc
gcc-4.2.2_20070905
gcc-ooo-3.4.1_2
gccmakedep-1.0.2
and:
find /usr/local -name 'libstdc++*'
On Mon, 24 Sep 2007, Mel wrote:
On Monday 24 September 2007 18:20:44 Marco Beishuizen wrote:
On Mon, 24 Sep 2007, Mel wrote:
Q: Do you have linux-jdk installed rather then diablo-jdk?
No, the FreeBSD jdk15 is installed.
Ah, it uses GCC 4.2, which has libstdc++ v6. -stable has v5. Did
After a portupgrade from OO 2.2.1 to 2.3.0, OO doesn't run anymore with
this messages:
/libexec/ld-elf.so.1: Shared object libstdc++.so.6 not found, required
by javaldx
/libexec/ld-elf.so.1: Shared object libstdc++.so.6 not found, required
by pagein
/libexec/ld-elf.so.1: Shared object
1 - 100 of 190 matches
Mail list logo
