On Thu, Jul 17, 2008 at 9:38 AM, Edward Ruggeri <[EMAIL PROTECTED]> wrote:
> Hi,
>
> This is a question about a hardware problem. I hope this is an
> appropriate place to ask.
>
> I have a recently purchased Lenovo ThinkPad, with a Atheros 5212
> wireless card (well, dmesg says it's an Atheros 521
Hi,
This is a question about a hardware problem. I hope this is an
appropriate place to ask.
I have a recently purchased Lenovo ThinkPad, with a Atheros 5212
wireless card (well, dmesg says it's an Atheros 5212; I believe it).
It also has a wired internet connector, which works perfectly fine.
Hi,
This is a question about a hardware problem. I hope this is an
appropriate place to ask.
I have a recently purchased Lenovo ThinkPad, with a Atheros 5212
wireless card (well, dmesg says it's an Atheros 5212; I believe it).
It also has a wired internet connector, which works perfectly fine.
Hello,
On Mon, 2007-10-29 at 18:40 +0200, Necati Demir wrote:
> Ok, then... how to update only installed applications?
Applications is packages taken from ports, so you go to ports if you
want to upgrade all applications. For more details, see ports(7) or
refer to FreeBSD Handbook. If you encount
Ok, then... how to update only installed applications?
On 28/10/2007, Jona Joachim <[EMAIL PROTECTED]> wrote:
>
> On Sun, 28 Oct 2007 21:51:19 +0200
> "Necati Demir" <[EMAIL PROTECTED]> wrote:
>
> > > [.]
> > >
> > > If you are running FreeBSD 6.2-RELEASE, you could try updating to
> > > eith
On Sun, 28 Oct 2007 21:51:19 +0200
"Necati Demir" <[EMAIL PROTECTED]> wrote:
> > [.]
> >
> > If you are running FreeBSD 6.2-RELEASE, you could try updating to
> > either the
> > latest 6-STABLE, or the upcoming 7.0, both of which have a newer
> > HAL. If that doesn't help either I don't think
> [.]
>
> If you are running FreeBSD 6.2-RELEASE, you could try updating to either
> the
> latest 6-STABLE, or the upcoming 7.0, both of which have a newer HAL.
> If that doesn't help either I don't think there is much you can do.
I am running 6.2-RELEASE.
How to update to 6-STABLE ?
--
>
On Sat, Oct 27, 2007 at 11:31:12PM +0300, Necati Demir wrote:
> On 27/10/2007, Erik Trulsson <[EMAIL PROTECTED]> wrote:
> >
> > On Sat, Oct 27, 2007 at 08:51:20PM +0300, Necati Demir wrote:
> > > Hi,
> > >
> > > As a 6 year linux user, i am new to
On 27/10/2007, Erik Trulsson <[EMAIL PROTECTED]> wrote:
>
> On Sat, Oct 27, 2007 at 08:51:20PM +0300, Necati Demir wrote:
> > Hi,
> >
> > As a 6 year linux user, i am new to freebsd. :)
> > In my laptop i have a atheros wireless card. To use it, i compiled
>
On Sat, Oct 27, 2007 at 08:51:20PM +0300, Necati Demir wrote:
> Hi,
>
> As a 6 year linux user, i am new to freebsd. :)
> In my laptop i have a atheros wireless card. To use it, i compiled modules;
>
> # cd /sys/modules/ath
> # make; make load
>
> # cd /sys/modules/
Hi,
As a 6 year linux user, i am new to freebsd. :)
In my laptop i have a atheros wireless card. To use it, i compiled modules;
# cd /sys/modules/ath
# make; make load
# cd /sys/modules/ath_hal
# make; make load
# cd /sys/modules/ath_rate_sample
# make; make load
# cd /sys/modules/wlan
# make
That's good. Thanks for the help!
But I forgot to ask: Is WPA managed through some other layer(like
wpa_supplicant), or is it integrated into iwconfig?
From,
Nate Peck
On 11/16/06, Christian Walther <[EMAIL PROTECTED]> wrote:
Hi,
it's not about the ath-chipset in this case. The chip works fin
Hi,
it's not about the ath-chipset in this case. The chip works fine, but
you should take care of the card you buy. Even if the chipset is
supported the card might not work at all. So read the manpage and
choose a card that is listed there -- including the revision number!
I'm using a DWL G650 wh
Hi!
How is the FreeBSD support for Atheros Chipsets? Is there 54 megabit speed?
It's good. See here:
http://www.freebsd.org/cgi/man.cgi?query=ath&apropos=0&sektion=0&manpath=FreeBSD+6.1-RELEASE&format=html
And also, how is WEP and/or WPA support?
It's also good. It works for me...
Regards,
Dear All,
How is the FreeBSD support for Atheros Chipsets? Is there 54 megabit speed?
And also, how is WEP and/or WPA support?
Nate Peck
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsu
So I created a wrapper for my wireless card (Netgear WG311v3) drivers from
windows using ndisgen following instructions at
http://www.pingwales.co.uk/2005/07/15/Project-Evil.htm
I loaded the module into loader.conf
On boot I get this message:
ndis0: mem
0xe0a0-0xe0a0,0xe0a1-0xe0a1ff
i believe there are also issues with some of the newer firmware versions
from cisco on these cards. google might tell you more, just thought i
recalled some problems with them in the past and having to roll back the fw
___
freebsd-questions@freebsd.org ma
[EMAIL PROTECTED] wrote:
Greetings from Merida, Yucatan, Mexico (The Maya Land)
Am having problems installing FreeBSD in my University under IBM Thinkcentre
MT-M-8183-T1S boxes.
I can´t detect the Wireless Cisco (Atheros) PCI lan card. Linux and Windows have
no problems recognizing the card but
On Tue, 17 Jan 2006 13:02:47 -0600
[EMAIL PROTECTED] wrote:
>
> Greetings from Merida, Yucatan, Mexico (The Maya Land)
>
> Am having problems installing FreeBSD in my University under IBM
> Thinkcentre MT-M-8183-T1S boxes.
>
> I can´t detect the Wireless Cisco (Atheros) PCI lan card. Linux and
>
Greetings from Merida, Yucatan, Mexico (The Maya Land)
Am having problems installing FreeBSD in my University under IBM Thinkcentre
MT-M-8183-T1S boxes.
I can´t detect the Wireless Cisco (Atheros) PCI lan card. Linux and Windows have
no problems recognizing the card but i have problems with Free
On 2005-12-15 22:34, Jim Pazarena <[EMAIL PROTECTED]> wrote:
> I can't believe how incredibly easy it was to get
> the wireless going in my laptop.
>
> add: if_ath_load="YES" to /boot/loader.conf
>
> and: ifconfig_ath0="dhcp" to /etc/rc.conf
>
> and it "works" !
>
> please tell me where I ca
Jim Pazarena wrote:
I can't believe how incredibly easy it was to get
the wireless going in my laptop.
add: if_ath_load="YES" to /boot/loader.conf
and: ifconfig_ath0="dhcp" to /etc/rc.conf
and it "works" !
please tell me where I can read up on how to "control" the
wireless link. Such a
I can't believe how incredibly easy it was to get
the wireless going in my laptop.
add: if_ath_load="YES" to /boot/loader.conf
and: ifconfig_ath0="dhcp" to /etc/rc.conf
and it "works" !
please tell me where I can read up on how to "control" the
wireless link. Such as how to enter the "S
Will freebsd 4.10 support Atheros wireless ABG cards.
Dan
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
24 matches
Mail list logo
