Hi all
Classic question about compatibility with new laptop...
Anyone have succefuly (or not) install FreeBSD 7.x on the new Dell
Precision M6400 or the Precision M6300 ?
I don't find any information on google. neither on
http://laptop.bsdgroup.de/freebsd/
Lots of thanks.
Regards.
--
Le 09/10/2008 à 22:04:24+0200, Albert Shih a écrit
Hi all
Classic question about compatibility with new laptop...
Anyone have succefuly (or not) install FreeBSD 7.x on the new Dell
Precision M6400 or the Precision M6300 ?
I don't find any information on google. neither on
Good day all,
I am having problems getting sound to work on an old
Dell Latitude. I configured the sound card following
the handbook, and the driver (snd_ich) loads just
fine. However I can neither hear anything when doing
cat file /dev/dsp nor can I raise the volume level
using the XFCE volume
On Tue, 20 Feb 2007 16:59:43 -0500 (EST)
Michael S [EMAIL PROTECTED] wrote:
I am having problems getting sound to work on an old
Dell Latitude. I configured the sound card following
the handbook, and the driver (snd_ich) loads just
fine. However I can neither hear anything when doing
cat
Thanks Norberto
I figured it out, it was a maestro3 driver.
Michael
--- Norberto Meijome [EMAIL PROTECTED] wrote:
On Tue, 20 Feb 2007 16:59:43 -0500 (EST)
Michael S [EMAIL PROTECTED] wrote:
I am having problems getting sound to work on an
old
Dell Latitude. I configured the sound card
Hello,
Anyone got any idea how I can access the built-in sd card reader on my dell
inspiron 6000 laptop? There's no /dev/sda at the moment. I can't seem to find
out how the card connects internally - neither usb nor scsi look very
likely...
Any more ideas?
Cheers,
Ben
On Mon, Sep 05, 2005 at 10:36:40AM +0100, Ben Paley wrote:
Anyone got any idea how I can access the built-in sd card reader on my
dell inspiron 6000 laptop?
Is there anything in /var/log/messages? If not, try 'pciconf -lv',
'usbdevs' and 'camcontrol devlist -v' to see if it is on the PCI, USB
On Monday 05 September 2005 11:04, Roland Smith wrote:
On Mon, Sep 05, 2005 at 10:36:40AM +0100, Ben Paley wrote:
Anyone got any idea how I can access the built-in sd card reader on my
dell inspiron 6000 laptop?
Is there anything in /var/log/messages?
Not so far as I can see, nor in dmesg
On Mon, Sep 05, 2005 at 11:24:33AM +0100, Ben Paley wrote:
On Monday 05 September 2005 11:04, Roland Smith wrote:
On Mon, Sep 05, 2005 at 10:36:40AM +0100, Ben Paley wrote:
Anyone got any idea how I can access the built-in sd card reader on my
dell inspiron 6000 laptop?
Is there
On Monday 05 September 2005 11:50, Roland Smith wrote:
$ pciconf -lv
snip/
[EMAIL PROTECTED]:1:2: class=0x080501 card=0x01881028 chip=0x08221180
rev=0x17
hdr=0x00
vendor = 'Ricoh Co Ltd'
device = 'SD Bus Host Adapter'
class= base peripheral
Is that it?
I
...PS -
Thanks not just for your advice, but for putting in the effort to find this
stuff out - I wouldn't have known where to start!
Thanks,
Ben
___
freebsd-questions@freebsd.org mailing list
On Mon, Sep 05, 2005 at 03:26:22PM +0100, Ben Paley wrote:
Is that it?
I think so. According to the following page,
http://www.math.ucla.edu/~jimc/insp6000/p-proc.html#sd it is a Ricoh
R5c576A chip. Looking at the Ricoh page for this chip,
On Monday 05 September 2005 17:03, Roland Smith wrote:
Thanks a lot for your advice - I shall follow it, even if it is slightly
dispiriting. Perhaps I should learn C properly and start writing some
drivers... :-)
Not that I want to discourage you, but that seems like a tall
order. Apart
Hello,
I'm having difficulty getting my Atheros 5212 based card to work in
either of my dell laptops. The card only has its power LED on for
about half a second when it is identified by the os (5.3BETA7), then it
goes off. dhclient causes the link LED to blink in a very consistent
manner
On Wednesday 20 October 2004 10:58 am, Eric Schuele wrote:
On Wednesday 20 October 2004 10:22 am, Eric Schuele wrote:
Hello,
I'm having difficulty getting my Atheros 5212 based card to work in
either of my dell laptops. The card only has its power LED on for
about half a second when it
On Wednesday 20 October 2004 01:38 pm, scott renna wrote:
Andrew,
Just saw your post and was wondering how you were able
to get the Dlink-G520 to work. I'm running 5.2.1
currently and tried to add additional devices into my
kernel according to a post I found on the subject:
they mention
On Wednesday 20 October 2004 11:47 am, Andrew L. Gould wrote:
I'm using the following atheros products successfully:
D-Link DWL-G520 (pci in a generic desktop running FreeBSD 5.3RC1)
D-Link DWL-G650 (pccard in a Dell Inspiron 8100 running FreeBSD
5.2.1)
I went out a grabbed a DWL-G650. It
On Wednesday 20 October 2004 09:33 pm, Eric Schuele wrote:
On Wednesday 20 October 2004 11:47 am, Andrew L. Gould wrote:
I'm using the following atheros products successfully:
D-Link DWL-G520 (pci in a generic desktop running FreeBSD 5.3RC1)
D-Link DWL-G650 (pccard in a Dell Inspiron 8100
Dear All
I have an inspiron 2650 from dell. I install FreeBSD 5.0 on , and it works.
But when i start KDE the main monitor screen start to scramble and like a
signal on scope ;)
but my external monitor works properlly.
Does any one know what can i do to my setting to make it work.
Thanx
19 matches
Mail list logo
