On Tuesday 26 October 2004 03:47, scott renna wrote:
So I am still having a go at getting this Dlink card
to work here's what i got:
pluto# ifconfig ath0 inet 192.168.2.180 netmask
255.255.255.0 ssid wepmode on authmode open
wepkey 0x1234567890
ifconfig: SIOCS80211: Invalid argument
Here's what I got:
This is my ifconfig for this device ath0 before
executing a new ifconfig command:
pluto# ifconfig ath0
ath0:
flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu
1500
inet6 fe80::20f:3dff:fea9:3645%ath0 prefixlen
64 scopeid 0x2
ether 00:0f:3d:a9:36:45
On Tuesday 26 October 2004 15:59, you wrote:
Here's what I got:
This is my ifconfig for this device ath0 before
executing a new ifconfig command:
pluto# ifconfig ath0
ath0:
flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu
1500
inet6 fe80::20f:3dff:fea9:3645%ath0 prefixlen
ok, well this system has a 3com, xl0 holding an ip of
192.168.2.150
Does this mean that I need to have each interface
having an IP on a different subnet?
maybe I could change the mask on the xl0 to
255.255.248.0 and it might work?
I wanted to have the wireless card on the same subnet
as the rest
On Tuesday 26 October 2004 17:38, scott renna wrote:
ok, well this system has a 3com, xl0 holding an ip of
192.168.2.150
Does this mean that I need to have each interface
having an IP on a different subnet?
maybe I could change the mask on the xl0 to
255.255.248.0 and it might work?
Nope,
oh man...ok that's what i was afraid of. i've always
wondered why you can't have two nics on the same
subnet in freebsd, maybe i'm just missing something or
is that by design?
I guess i'll drop the wired line and switch to
wireless tonight and give it a shot.
would aliasing one card to the next
SUCCESS...at least at 40-bit WEP, which is good
enough, it's not like getting up higher will make that
much of a difference. Thanks for the tips, still
puzzled why two cards in the same system can't be on
the same subnet.
thanks for the help.
--- Daan Vreeken [PA4DAN] [EMAIL PROTECTED]
wrote:
So I am still having a go at getting this Dlink card
to work here's what i got:
pluto# ifconfig ath0 inet 192.168.2.180 netmask
255.255.255.0 ssid wepmode on authmode open
wepkey 0x1234567890
ifconfig: SIOCS80211: Invalid argument
pluto# ifconfig ath0 inet 192.168.2.180 netmask
255.255.255.0
