Hi List, I want to establish an IPv6-over-IPv4 tunnel to my ISP. After some hours trying i got myself acounts at HE and XS26 for testing and they work. My Setup is FreeBSD 4.11-STABLE with ip(6)fw (stateful) and natd running. My ISP gave the appended setup information which is for Debian Linux (which i've never used). The IPv4 endpoints are 217.197.85.214(me) and 192.109.42.23(ISP) the IPv6 endpoints are 2001:bf0:c00c::c00c:0002:2(me) and 2001:bf0:c00c::c00c:0002:1(ISP). I asked my ISP for support but they don't know the way for FreeBSD and they tell me the tunnel is definitely working.
I tried doing the following but this and several other approaches did not yield anything : zwelf:~# ifconfig gif0 create tunnel 217.197.85.214 192.109.42.23 up zwelf:~# ifconfig gif0 inet6 alias 2001:bf0:c00c::c00c:0002:2 zwelf:~# ping6 ff02::1%gif0 PING6(56=40+8+8 bytes) fe80::250:bfff:fe58:6c75%gif0 --> ff02::1%gif0 16 bytes from fe80::250:bfff:fe58:6c75%gif0, icmp_seq=0 hlim=64 time=0.746 ms 16 bytes from fe80::250:bfff:fe58:6c75%gif0, icmp_seq=1 hlim=64 time=0.422 ms 16 bytes from fe80::250:bfff:fe58:6c75%gif0, icmp_seq=2 hlim=64 time=0.427 ms ^C --- ff02::1%gif0 ping6 statistics --- 3 packets transmitted, 3 packets received, 0% packet loss round-trip min/avg/max/std-dev = 0.422/0.532/0.746/0.152 ms Thanks for reading, any comments appreciated Leon /* /etc/network/interfaces for a Debian system */ auto zwelf6 iface zwelf6 inet6 v4tunnel address 2001:bf0:c00c::c00c:0002:2 netmask 112 local 217.197.85.214 endpoint 192.109.42.23 ttl 64 up ip tunnel change zwelf6 ttl 64 up echo 1 > /proc/sys/net/ipv6/conf/all/forwarding up ip -6 route add 2001::/3 dev zwelf6 down ip -6 route delete 2001::/3 dev zwelf6 /* full ifconfig */ rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=40<POLLING> inet 192.168.10.1 netmask 0xffffff00 broadcast 192.168.10.255 inet6 fe80::250:bfff:fe58:6c75%rl0 prefixlen 64 scopeid 0x1 ether 00:50:bf:58:6c:75 media: Ethernet autoselect (100baseTX <full-duplex>) status: active rl1: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=40<POLLING> inet6 fe80::230:84ff:fe0b:15d4%rl1 prefixlen 64 scopeid 0x2 ether 00:30:84:0b:15:d4 media: Ethernet 10baseT/UTP status: active lp0: flags=8851<UP,POINTOPOINT,RUNNING,SIMPLEX,MULTICAST> mtu 1500 lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x4 inet 127.0.0.1 netmask 0xff000000 ppp0: flags=8010<POINTOPOINT,MULTICAST> mtu 1500 sl0: flags=c010<POINTOPOINT,LINK2,MULTICAST> mtu 552 tun0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1492 inet 217.197.85.214 --> 192.109.42.172 netmask 0xffffffff inet6 fe80::250:bfff:fe58:6c75%tun0 prefixlen 64 scopeid 0x7 Opened by PID 70 gif0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1280 tunnel inet 217.197.85.214 --> 192.109.42.23 inet6 fe80::250:bfff:fe58:6c75%gif0 prefixlen 64 scopeid 0x8 inet6 2001:bf0:c00c::c00c:2:2 prefixlen 64 -- gnupg key ID: 9B820836 & Fingerprint: 6081 8F41 8FEC 0D69 DB98 F014 0FD4 B47D 9B82 0836 _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"