Hi all,
I find myself with little time to find a neat solution for the following situation:
We have a Shuttle on which fbsd 5.2.1 is installed. Now, the machine used to have just one network interface, of which I'd simply switch the settings when the machine needs to be used for demo purposes, rather than running in our local network.
So, I just installed a second network interface, and I'd like the machine to become smart enough to do the following:
-Boot, check if rl0 has a cable attached to it, and if so, use that as active network interface, with fixed settings (gateway, nameserver, and IPv4 address all set to 192.168.1.1).
-if rl0 does not have a cable attached to it, use DHCP on interface rl1 and use that.
Sounds relatively straightforward. So I set the settings of the rl0 and rl1 network interfaces (via sysinstall) to reflect just that. However, when doing so, the gateways seem to get shared, and just get set to 192.168.1.1.
Can anyone point me to the proper means of setting this up properly? Normally I would RTFM regarding dhclient.conf and such, but unfortunately I find myself with very little time available for spending on it, so I hope someone can give me a quick pointer in the right direction...
Cheerz! Olafo _______________________________________________ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
