Ok, I didn't read your dmesg output in detail.. but I suspect what you may be running into is that the other USB ports are "USB2.0"
See: pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 9 Right in the middle of a bunch of other USB stuff? And again with: pci0: <unknown card> (vendor=0x8086, dev=0x2445) at 31.5 irq 9 at the end. Vendor 0x8086 is intel (cute eh?), and you are running an intel chipset (the other USB ports were intel). I don't know what either dev 0x2443 or 0x2445 is, but I bet it is a USB2 controller. (Note: Intel has a 82443 controller, but its device identifier is 0x71988). I have no idea what the state of USB2 support is at this point. On Wed, 2003-01-22 at 13:49, Oscar Ivan Lepe Aldama wrote: > Hi, > I have an Intel D815EEA2 mobo with six integrated USB ports. > FreeBSD seams to only work with two of them, those besides > the integrated NIC connector. I have done "/dev/MAKEDEV usb2" > but when I do "/usr/sbin/usbd -f /dev/usb2" I get a > "usbd: Could not open /dev/usb2, Device not configured" > I'm guessing that I need to config(8) the kernel for it to work with the rest > of the USB ports. In fact the usb(4) page mentions it but does not explains > how. I didn't find a hint on how to do this neither in LINT nor in config(8). > Any help would be appreciated. > > My dmesg is this: > > Copyright (c) 1992-2002 The FreeBSD Project. > Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 > The Regents of the University of California. All rights reserved. > FreeBSD 4.7-RELEASE #0: Wed Jan 8 16:54:48 PST 2003 > [EMAIL PROTECTED]:/usr/src/sys/compile/GENERICplusAGP > Timecounter "i8254" frequency 1193182 Hz > CPU: Pentium III/Pentium III Xeon/Celeron (1394.83-MHz 686-class CPU) > Origin = "GenuineIntel" Id = 0x6b1 Stepping = 1 > > Features=0x383fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA, > CM OV,PAT,PSE36,MMX,FXSR,SSE> > real memory = 132907008 (129792K bytes) > avail memory = 124125184 (121216K bytes) > Preloaded elf kernel "kernel" at 0xc0516000. > Pentium Pro MTRR support enabled > md0: Malloc disk > Using $PIR table, 12 entries at 0xc00f2cd0 > npx0: <math processor> on motherboard > npx0: INT 16 interface > pcib0: <Host to PCI bridge> on motherboard > pci0: <PCI bus> on pcib0 > agp0: <Intel 82815 (i815 GMCH) SVGA controller> mem > 0xffa80000-0xffafffff,0xf800 0000-0xfbffffff irq 11 at device 2.0 on pci0 > pcib1: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on pci0 > pci1: <PCI bus> on pcib1 > fxp0: <Intel Pro/100 Ethernet> port 0xde80-0xdebf mem 0xff8fe000-0xff8fefff > irq 11 at device 8.0 on pci1 > fxp0: Ethernet address 00:03:47:e8:e8:58 > inphy0: <i82562ET 10/100 media interface> on miibus0 > inphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > fxp1: <Intel Pro 10/100B/100+ Ethernet> port 0xdf00-0xdf3f mem > 0xff700000-0xff7f ffff,0xff8ff000-0xff8fffff irq 11 at device 9.0 on pci1 > fxp1: Ethernet address 00:02:b3:3f:e4:e0 > inphy1: <i82555 10/100 media interface> on miibus1 > inphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto > isab0: <Intel 82801BA/BAM (ICH2) PCI to LPC bridge> at device 31.0 on pci0 > isa0: <ISA bus> on isab0 > atapci0: <Intel ICH2 ATA100 controller> port 0xffa0-0xffaf at device 31.1 on > pci 0 ata0: at 0x1f0 irq 14 on atapci0 > ata1: at 0x170 irq 15 on atapci0 > uhci0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> port 0xef40-0xef5f irq > 11 at device 31.2 on pci0 > usb0: <Intel 82801BA/BAM (ICH2) USB controller USB-A> on uhci0 > usb0: USB revision 1.0 > uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub0: 2 ports with 2 removable, self powered > pci0: <unknown card> (vendor=0x8086, dev=0x2443) at 31.3 irq 9 > uhci1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> port 0xef80-0xef9f irq > 10 at device 31.4 on pci0 > usb1: <Intel 82801BA/BAM (ICH2) USB controller USB-B> on uhci1 > usb1: USB revision 1.0 > uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 > uhub1: 2 ports with 2 removable, self powered > uhub2: Standard Microsystems product 0x0140, class 9/0, rev 1.10/0.00, addr 2 > device_probe_and_attach: uhub2 attach returned 6 > uhub2: Standard Microsystems product 0x0140, class 9/0, rev 1.10/0.00, addr 2 > device_probe_and_attach: uhub2 attach returned 6 > pci0: <unknown card> (vendor=0x8086, dev=0x2445) at 31.5 irq 9 > orm0: <Option ROMs> at iomem > 0xc0000-0xcbfff,0xcc000-0xccfff,0xcd000-0xce7ff,0xc e800-0xcf7ff on isa0 > fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 > fdc0: FIFO enabled, 8 bytes threshold > fd0: <1440-KB 3.5" drive> on fdc0 drive 0 > atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0 > atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0 > kbd0 at atkbd0 > psm0: <PS/2 Mouse> irq 12 on atkbdc0 > psm0: model IntelliMouse, device ID 3 > vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 > sc0: <System console> at flags 0x100 on isa0 > sc0: VGA <16 virtual consoles, flags=0x300> > sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 > sio0: type 16550A > sio1 at port 0x2f8-0x2ff irq 3 on isa0 > sio1: type 16550A > ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0 > ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode > plip0: <PLIP network interface> on ppbus0 > lpt0: <Printer> on ppbus0 > lpt0: Interrupt-driven port > ppi0: <Parallel I/O> on ppbus0 > ad0: 39266MB <IC35L040AVER07-0> [79780/16/63] at ata0-master UDMA100 > acd0: CDROM <GCR-8521B> at ata1-master PIO4 > Mounting root from ufs:/dev/ad0s1a > ugen0: WINBOND W9967CF, rev 1.10/1.10, addr 3 > > -- > = > = Oscar-Ivan Lepe-Aldama > = http://people.ac.upc.es/oscar > ======================================= -- David E. Cross To Unsubscribe: send mail to [EMAIL PROTECTED] with "unsubscribe freebsd-questions" in the body of the message
