On 2005-02-24 12:49:48 -0800, Matthew Jacob wrote:
Or give us a /proc/scsi/scsi output dump?
No such file. (And yes, /proc is mounted).
I meant from the linux box.
$ cat /proc/scsi/scsi
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: COMPAQ Model: HSV110 (C)COMPAQ
And just reconfirming- a 'camcontrol rescan 3:0:1' does *not* see the disk?
On Fri, 25 Feb 2005 14:52:12 +0100, Morten Liebach [EMAIL PROTECTED] wrote:
On 2005-02-24 12:49:48 -0800, Matthew Jacob wrote:
Or give us a /proc/scsi/scsi output dump?
No such file. (And yes, /proc is
On 2005-02-25 07:19:58 -0800, Matthew Jacob wrote:
And just reconfirming- a 'camcontrol rescan 3:0:1' does *not* see the disk?
# camcontrol rescan 3:0:1
Re-scan of 3:0:1 was successful
# camcontrol devlist -v
scbus0 on ciss0 bus 0:
COMPAQ RAID 1 VOLUME reco at scbus0 target 0 lun 0
On 2005-02-22 11:54:07 -0800, Matthew Jacob wrote:
These things look OK, we have both Linux, Windows and HP-UX hosts on the
same SAN with the same setup for them.
Can you clue us in on the actual lun setup exported by the array?
500 GB volume exported on LUN 1 single-path. WWPN is
Or give us a /proc/scsi/scsi output dump?
No such file. (And yes, /proc is mounted).
I meant from the linux box.
Can you tell us the connection topology other than same SAN?
A fiber goes straight from the SAN, a HP StorageWorks HSV 110 box, to a
HP StorageWorks SAN Switch 2/8-EL, to
On 2005-02-21 10:29:48 -0600, Dan Nelson wrote:
In the last episode (Feb 21), Morten Liebach said:
I am trying to use a HP EVA 5000 SAN through a Qlogic ISP 2200 PCI
FC-AL Adapter on a HP DL-380 (dmesg inline at the end), and so far
I've failed.
The HBA is recognized as:
isp0: Qlogic
These things look OK, we have both Linux, Windows and HP-UX hosts on the
same SAN with the same setup for them.
Can you clue us in on the actual lun setup exported by the array?
Or give us a /proc/scsi/scsi output dump?
Can you tell us the connection topology other than same SAN?
LUN 0
Hello
I am trying to use a HP EVA 5000 SAN through a Qlogic ISP 2200 PCI FC-AL
Adapter on a HP DL-380 (dmesg inline at the end), and so far I've
failed.
The HBA is recognized as:
isp0: Qlogic ISP 2200 PCI FC-AL Adapter port 0x4000-0x40ff mem
0xf7ff-0xf7 ff0fff irq 10 at device 1.0 on pci6
In the last episode (Feb 21), Morten Liebach said:
I am trying to use a HP EVA 5000 SAN through a Qlogic ISP 2200 PCI
FC-AL Adapter on a HP DL-380 (dmesg inline at the end), and so far
I've failed.
The HBA is recognized as:
isp0: Qlogic ISP 2200 PCI FC-AL Adapter port 0x4000-0x40ff mem
