On Fri, 27 May 2011, Jaime Kikpole wrote:
On Thu, May 26, 2011 at 7:46 PM, Chris Hill wrote:
I'm looking to build a NAT / DHCP box for a lab network for my company. My
question is, how do I estimate the amount of RAM the machine will need?
FWIW, I can tell you some experiences that I've had.
On Thu, May 26, 2011 at 7:46 PM, Chris Hill wrote:
> I'm looking to build a NAT / DHCP box for a lab network for my company. My
> question is, how do I estimate the amount of RAM the machine will need?
FWIW, I can tell you some experiences that I've had.
Example #1:
At one time, I had as many as
--As of May 26, 2011 7:46:10 PM -0400, Chris Hill is alleged to have said:
I'm looking to build a NAT / DHCP box for a lab network for my company.
My question is, how do I estimate the amount of RAM the machine will need?
This box will be running isc-dhcpd, doing NAT either via natd or pf, and
-Original Message-
From: owner-freebsd-questi...@freebsd.org
[mailto:owner-freebsd-questi...@freebsd.org] On Behalf Of Chris Hill
Sent: 27 May 2011 02:16
To: Gary Gatten; Chuck Swiger
Cc: 'questi...@freebsd.org'
Subject: Re: RAM needed for DHCP + router?
On Thu, 26 May
Message -
From: Chris Hill [mailto:ch...@monochrome.org]
Sent: Thursday, May 26, 2011 06:46 PM
To: FreeBSD Questions List
Subject: RAM needed for DHCP + router?
Hello list,
I'm looking to build a NAT / DHCP box for a lab network for my company. My
question is, how do I estimate the amou
? Tweaked/minimal
kernel, etc.
- Original Message -
From: Chris Hill [mailto:ch...@monochrome.org]
Sent: Thursday, May 26, 2011 06:46 PM
To: FreeBSD Questions List
Subject: RAM needed for DHCP + router?
Hello list,
I'm looking to build a NAT / DHCP box for a lab network for my co
On May 26, 2011, at 4:46 PM, Chris Hill wrote:
> I'm looking to build a NAT / DHCP box for a lab network for my company. My
> question is, how do I estimate the amount of RAM the machine will need?
How many DHCP leases and NAT clients?
ISC's DHCPd typically runs a few tens of MB unless you have
Hello list,
I'm looking to build a NAT / DHCP box for a lab network for my company. My
question is, how do I estimate the amount of RAM the machine will need?
This box will be running isc-dhcpd, doing NAT either via natd or pf, and
not much else. I expect the amount of traffic (throughput) to