Eventually I would like to achieve this:
I have another, very old, PC with following
configuration:
IDE/0 (on motherboard) master and slave HDs
IDE/1 (on motherboard) -broken-
I like to use this soundcard/IDE controller for
adding a CDrom to this
Joel wrote:
Yet another question could be how much the lab
wants to invest on a slow motherboard with broken
curcuitry (which might also depend on what borked
the on-board ATA controller).
Although it's going a bit out-of-topic, the
situation is that the Windows desease is very
effective
The sounds cards IDE interface is not a standard IDE. It is for
Creative's own CD-ROM drive. The was a drive matcd that would work with
these drives, but I don't see it in the LINT config file.
On Thu, 28 Apr 2005 07:48:00 -0700 (PDT)
Rob [EMAIL PROTECTED] wrote:
Joel wrote:
For now,
Joel wrote:
For now, another, possibly silly, question:
If this is indeed a multifunctional multimedia card,
then does that mean I can connect another harddisk
to this card, and it will be recognized as a
harddisk on ata2 ?
Very likely.
However, if freeBSD does what some other OSses do
when
On Thu, Apr 28, 2005 at 07:48:00AM -0700, Rob wrote:
OK, I have opened the box and had a look at this
ISA card. It's indeed a sound card, Creative
SB16/SB32. But it also has one IDE Interface
connector, which apparently is the ata2 device.
Wow, this *is* an old machine!
So, I thought,
I don't think it'll work for that - too bastardized. I don't know what
they did but they might have changed the pinout or something so that it
was only compatible with Creative CD-ROMs. In the best case, if you
got it to work, it would be deathly slow.
-- Clifton
I can't imagine why you
--- Clifton Royston wrote:
On Thu, Apr 28, 2005 at 07:48:00AM -0700, Rob wrote:
Eventually I would like to achieve this:
I have another, very old, PC with following
configuration:
IDE/0 (on motherboard) master and slave HDs
IDE/1 (on motherboard) -broken-
I like to use this
On Thu, Apr 28, 2005 at 07:31:01PM -0700, Rob wrote:
--- Clifton Royston wrote:
On Thu, Apr 28, 2005 at 07:48:00AM -0700, Rob wrote:
Eventually I would like to achieve this:
I have another, very old, PC with following
configuration:
IDE/0 (on motherboard) master and slave HDs
Joel wrote:
I'm running FreeBSD on a range of PCs, from
Pentium-1 (60 MHz) to Pentium-4 (2.60GHz), though
none but one has a 'ata2' line in the dmesg
output:
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
...
ata2: Generic ESDI/IDE/ATA controller at port
0x36e-0x36f,0x168-0x16f irq
--- jason henson [EMAIL PROTECTED] wrote:
Rob wrote:
Joel wrote:
On Tue, 26 Apr 2005 18:44:18 -0700 (PDT)
Rob [EMAIL PROTECTED] wrote
I'm running FreeBSD on a range of PCs, from
Pentium-1 (60 MHz) to Pentium-4 (2.60GHz), though
none but one has a 'ata2' line in the dmesg
It's also been suggested that this may be on a
multifunction card, which would typically be a
multimedia card.
OK, I will soon shut the system down and inspect
the inside of the box.
Was going to complain that you hadn't done that earlier, but maybe
you've been
Don't know the details of my motherboard.
Whole dmesg output is here:
http://surfion.snu.ac.kr/~lahaye/dmesg.boot
BTW, vmstat -ia might be usefull, most likely not.
interrupt total rate
???0 0
irq0: clk
Rob wrote:
--- jason henson [EMAIL PROTECTED] wrote:
Rob wrote:
Joel wrote:
On Tue, 26 Apr 2005 18:44:18 -0700 (PDT)
Rob [EMAIL PROTECTED] wrote
I'm running FreeBSD on a range of PCs, from
Pentium-1 (60 MHz) to Pentium-4 (2.60GHz), though
none but one has a 'ata2' line
It's also been suggested that this may be on a
multifunction card, which would typically be a
multimedia card.
OK, I will soon shut the system down and inspect
the inside of the box.
Was going to complain that you hadn't done that
earlier, but maybe you've
Hi,
I'm running FreeBSD on a range of PCs, from Pentium-1
(60 MHz) to Pentium-4 (2.60GHz), though none but one
has a 'ata2' line in the dmesg output:
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
...
ata2: Generic ESDI/IDE/ATA controller at port
0x36e-0x36f,0x168-0x16f irq
On Tue, 26 Apr 2005 18:44:18 -0700 (PDT)
Rob [EMAIL PROTECTED] wrote
Hi,
I'm running FreeBSD on a range of PCs, from Pentium-1
(60 MHz) to Pentium-4 (2.60GHz), though none but one
has a 'ata2' line in the dmesg output:
ata0: channel #0 on atapci0
Joel wrote:
On Tue, 26 Apr 2005 18:44:18 -0700 (PDT)
Rob [EMAIL PROTECTED] wrote
I'm running FreeBSD on a range of PCs, from
Pentium-1 (60 MHz) to Pentium-4 (2.60GHz), though
none but one has a 'ata2' line in the dmesg output:
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
...
I'm real new to the FreeBSD world so I might be way off on this.
Any chance it's an IDE controller on a soundcard? Probably ISA by what
i'm reading below.
R. Bowers
Rob wrote:
Joel wrote:
On Tue, 26 Apr 2005 18:44:18 -0700 (PDT)
Rob [EMAIL PROTECTED] wrote
I'm running FreeBSD on a range
On Tuesday 26 April 2005 08:13 pm, Rob Bowers wrote:
I'm real new to the FreeBSD world so I might be way off on this.
Any chance it's an IDE controller on a soundcard? Probably ISA by
what i'm reading below.
Some of the motherboards have 4 IDE controllers. The last 2 are
frequently RAIDable.
I'm running FreeBSD on a range of PCs, from
Pentium-1 (60 MHz) to Pentium-4 (2.60GHz), though
none but one has a 'ata2' line in the dmesg output:
ata0: channel #0 on atapci0
ata1: channel #1 on atapci0
...
ata2: Generic ESDI/IDE/ATA controller at port
Rob wrote:
Joel wrote:
On Tue, 26 Apr 2005 18:44:18 -0700 (PDT)
Rob [EMAIL PROTECTED] wrote
I'm running FreeBSD on a range of PCs, from
Pentium-1 (60 MHz) to Pentium-4 (2.60GHz), though
none but one has a 'ata2' line in the dmesg output:
ata0: channel #0 on atapci0
ata1: channel #1 on
21 matches
Mail list logo
