Hi all!.
I need help. I have an INTEL i865 motherboard, I have 4.9 installed on
my computer.
There's no sound there, I know how to make it, but it doesn't work.
And I have Lucent/Agere LT WinModem
If anybody see anything else I need to do, tell me please...
So, how can I setup my hardware to work on this beautiful system?
Here is my dmesg output:
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-RELEASE #0: Thu Jul 15 11:29:55 EEST 2004
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel(R) Celeron(R) CPU 2.60GHz (2593.68-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 250802176 (244924K bytes)
avail memory = 238632960 (233040K bytes)
Preloaded elf kernel "kernel" at 0xc053f000.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 12 entries at 0xc00f3d20
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82865G (865G GMCH) SVGA controller> port 0xec00-0xec07
mem 0xffa80000-0xffafffff,0xf0000000-0xf7ffffff irq 11 at device 2.0
on pci0
agp0: detected 16252k stolen memory
agp0: aperture size is 128M
pcib1: <PCI to PCI bridge (vendor=8086 device=2573)> at device 3.0 on
pci0
pci1: <PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> port
0xac00-0xac1f mem 0xff7e0000-0xff7fffff irq 10 at device 1.0 on pci1
em0: Speed:N/A Duplex:N/A
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xc800-0xc81f
irq 11 at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xcc00-0xcc1f
irq 5 at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xd000-0xd01f
irq 10 at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xd400-0xd41f
irq 11 at device 29.3 on pci0
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <USB controller> at 29.7 irq 9
pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on
pci0
pci2: <PCI bus> on pcib2
pci2: <unknown card> (vendor=0x11c1, dev=0x0440) at 0.0 irq 11
xl0: <3Com 3c900B-TPC Etherlink XL> port 0xb400-0xb47f mem
0xff8ff800-0xff8ff87f irq 10 at device 4.0 on pci2
xl0: Ethernet address: 00:50:da:48:75:47
xl0: selecting 10baseT transceiver, half duplex
isab0: <PCI to ISA bridge (vendor=8086 device=24d0)> at device 31.0 on
pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 ATA100 controller> port
0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
atapci1: <Intel ICH5 SATA150 controller> port
0xd800-0xd80f,0xdc00-0xdc03,0xe000-0xe007,0xe400-0xe403,0xe800-0xe807
irq 10 at device 31.2 on pci0
ata2: at 0xe800 on atapci1
ata3: at 0xe000 on atapci1
pci0: <unknown card> (vendor=0x8086, dev=0x24d3) at 31.3 irq 3
pci0: <unknown card> (vendor=0x8086, dev=0x24d5) at 31.5 irq 3
orm0: <Option ROM> at iomem 0xc0000-0xc9fff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ad0: 19541MB <Maxtor 2B020H1> [39703/16/63] at ata0-master UDMA100
acd0: CDROM <LG CD-ROM CRD-8522B> at ata0-slave PIO4
Mounting root from ufs:/dev/ad0s3a
xl0: selecting BNC port, half duplex
Waiting (max 60 seconds) for system process `vnlru' to stop...stopped
Waiting (max 60 seconds) for system process `bufdaemon' to
stop...stopped
Waiting (max 60 seconds) for system process `syncer' to stop...stopped
syncing disks... 1
done
Uptime: 20m31s
Rebooting...
Copyright (c) 1992-2003 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993,
1994
The Regents of the University of California. All rights reserved.
FreeBSD 4.9-RELEASE #1: Thu Jul 15 16:20:53 EEST 2004
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/burnit
Timecounter "i8254" frequency 1193182 Hz
CPU: Intel(R) Celeron(R) CPU 2.60GHz (2593.68-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf29 Stepping = 9
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
real memory = 250802176 (244924K bytes)
avail memory = 239067136 (233464K bytes)
Preloaded elf kernel "kernel" at 0xc04ec000.
Warning: Pentium 4 CPU: PSE disabled
Pentium Pro MTRR support enabled
md0: Malloc disk
Using $PIR table, 12 entries at 0xc00f3d20
npx0: <math processor> on motherboard
npx0: INT 16 interface
pcib0: <Host to PCI bridge> on motherboard
pci0: <PCI bus> on pcib0
agp0: <Intel 82865G (865G GMCH) SVGA controller> port 0xec00-0xec07
mem 0xffa80000-0xffafffff,0xf0000000-0xf7ffffff irq 11 at device 2.0
on pci0
agp0: detected 16252k stolen memory
agp0: aperture size is 128M
pcib1: <PCI to PCI bridge (vendor=8086 device=2573)> at device 3.0 on
pci0
pci1: <PCI bus> on pcib1
em0: <Intel(R) PRO/1000 Network Connection, Version - 1.7.16> port
0xac00-0xac1f mem 0xff7e0000-0xff7fffff irq 10 at device 1.0 on pci1
em0: Speed:N/A Duplex:N/A
uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0xc800-0xc81f
irq 11 at device 29.0 on pci0
usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
usb0: USB revision 1.0
uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0xcc00-0xcc1f
irq 5 at device 29.1 on pci0
usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
usb1: USB revision 1.0
uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0xd000-0xd01f
irq 10 at device 29.2 on pci0
usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
usb2: USB revision 1.0
uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0xd400-0xd41f
irq 11 at device 29.3 on pci0
usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
usb3: USB revision 1.0
uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
pci0: <USB controller> at 29.7 irq 9
pcib2: <Intel 82801BA/BAM (ICH2) Hub to PCI bridge> at device 30.0 on
pci0
pci2: <PCI bus> on pcib2
pci2: <unknown card> (vendor=0x11c1, dev=0x0440) at 0.0 irq 11
xl0: <3Com 3c900B-TPC Etherlink XL> port 0xb400-0xb47f mem
0xff8ff800-0xff8ff87f irq 10 at device 4.0 on pci2
xl0: Ethernet address: 00:50:da:48:75:47
xl0: selecting 10baseT transceiver, half duplex
isab0: <PCI to ISA bridge (vendor=8086 device=24d0)> at device 31.0 on
pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH5 ATA100 controller> port
0xffa0-0xffaf,0-0x3,0-0x7,0-0x3,0-0x7 at device 31.1 on pci0
ata0: at 0x1f0 irq 14 on atapci0
ata1: at 0x170 irq 15 on atapci0
atapci1: <Intel ICH5 SATA150 controller> port
0xd800-0xd80f,0xdc00-0xdc03,0xe000-0xe007,0xe400-0xe403,0xe800-0xe807
irq 10 at device 31.2 on pci0
ata2: at 0xe800 on atapci1
ata3: at 0xe000 on atapci1
pci0: <unknown card> (vendor=0x8086, dev=0x24d3) at 31.3 irq 3
pcm0: <Intel ICH5 (82801EB)> mem
0xffa7f400-0xffa7f4ff,0xffa7f800-0xffa7f9ff irq 3 at device 31.5 on
pci0
pcm0: <Analog Devices AD1985 AC97 Codec>
orm0: <Option ROM> at iomem 0xc0000-0xc9fff on isa0
pmtimer0 on isa0
fdc0: <NEC 72065B or clone> at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on
isa0
fdc0: FIFO enabled, 8 bytes threshold
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> flags 0x1 irq 1 on atkbdc0
kbd0 at atkbd0
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: model IntelliMouse, device ID 3
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A
sio1: configured irq 3 not in bitmap of probed irqs 0
ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
ad0: 19541MB <Maxtor 2B020H1> [39703/16/63] at ata0-master UDMA100
acd0: CDROM <LG CD-ROM CRD-8522B> at ata0-slave PIO4
Mounting root from ufs:/dev/ad0s3a
xl0: selecting BNC port, half duplex
_______________________________________________
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
