There are few things you should do.
First,
w/r to you complaint about first-kill-then restart, this will do it for you
/etc/rc.d/dhclient lagg0 restart
second,
I remember you wrote that you have a trouble with disconnects even in
wireless-only setup (no failover setup). If so, you should run and
A follow-up:
third,
I would test with IPv6 disabled (entirely for the system), regardless of
connectivity type;
that also means to explicitly disable that failover setup line in your config
ipv6_activate_all_interfaces=**YES
jb
W/r to IPv6 (disable, enable, etc):
read man pages for
The thing very annoying, is that when my wireless disconnects, I must wait
until wpa_supplicant re-associate to the AP. Then I have no working
connection until I redo dhclient lagg0.
And running dhclient lagg0 will say dhclient already running.. So I always
need to kill it before. That issue does
On 30/11/2012 21:15, jb wrote:
David Demelier demelier.david at gmail.com writes:
Hi,
In my university, I have a WPA-EAP wifi access point, it requires
authentification to access, with dhclient, I'm disconnected randomly and
I must run wpa_cli reconfigure / dhclient again to get it working.
David Demelier demelier.david at gmail.com writes:
...
Logs are your friends.
If the lease actually expires and you have to get a new IP (a new lease), then
you could have a temporary disconnect.
But if dhcp server(s) are working correctly the lease should be renewed or
rebound without
David Demelier demelier.david at gmail.com writes:
...
I have setup lagg0 for a failover with ethernet, (note the problem
appears if I use wlan0 only too)
# Fail over between wired/wireless.
cloned_interfaces=lagg0
ifconfig_msk0=up
ifconfig_ath0=ether 18:a9:05:87:38:0a
On 13/12/2012 23:39, jb wrote:
David Demelier demelier.david at gmail.com writes:
...
I have setup lagg0 for a failover with ethernet, (note the problem
appears if I use wlan0 only too)
# Fail over between wired/wireless.
cloned_interfaces=lagg0
ifconfig_msk0=up
ifconfig_ath0=ether
Hi,
In my university, I have a WPA-EAP wifi access point, it requires
authentification to access, with dhclient, I'm disconnected randomly and
I must run wpa_cli reconfigure / dhclient again to get it working.
I have never found a solution for that, so I tried for testing, to use
dhcpcd
