No strange IDE settings, it has been that way for years.
Regards,
Deian
On Feb 18, 2008 12:12 AM, Brian A. Seklecki (Mobile)
[EMAIL PROTECTED] wrote:
On Sun, 2008-02-17 at 23:45 +0200, Deian Popov wrote:
I will most definitely do, but this would happen after few days (don't
have time to
On Sun, 2008-02-17 at 22:53 +0200, Deian Popov wrote:
I have tested numerous times both 6.3 and
7 and the ata driver would not detect my hdd. Here is output of dmesg
on 6.2system:
File a bug for sure!
Here are the relevant lines from the working 6.2 system:
atapci0: Intel ICH5 SATA150
During my struggle to get my machine up and running without loosing
files/settings I made the stupid mistake to rebuild kernel twice without
rebooting, which completely made my system unbootable, and couldn't go to
loader prompt to boot kernel.old. I have tested numerous times both 6.3 and
7 and
I will most definitely do, but this would happen after few days (don't have
time to fix the system before that). The output of 6.3 and 7 is the same, so
I will provide one from 6.3. Should I use
http://www.freebsd.org/send-pr.html to file the report ?
On Feb 17, 2008 11:09 PM, Brian A. Seklecki
On Sun, 2008-02-17 at 23:45 +0200, Deian Popov wrote:
I will most definitely do, but this would happen after few days (don't
have time to fix the system before that). The output of 6.3 and 7 is
the same, so I will provide one from 6.3. Should I use
http://www.freebsd.org/send-pr.html to file
Hello,
I'm pretty stuck with the death of my bsd machine after attempt on upgrade
from 6.2 to 6.3. Some time ago, I successfully upgraded from 6.1 to
6.2following the steps in the manual
1) cvsup source to specific release
2) buildworld
3) buildkernel
4) installkernel
5) boot
6) mergemaster -p
Deian Popov wrote:
Hello,
I'm pretty stuck with the death of my bsd machine after attempt on upgrade
from 6.2 to 6.3. Some time ago, I successfully upgraded from 6.1 to
6.2following the steps in the manual
1) cvsup source to specific release
2) buildworld
3) buildkernel
4) installkernel
5)
At 03:02 PM 2/15/2008, Deian Popov wrote:
Hello,
I'm pretty stuck with the death of my bsd machine after attempt on upgrade
from 6.2 to 6.3. Some time ago, I successfully upgraded from 6.1 to
6.2following the steps in the manual
1) cvsup source to specific release
2) buildworld
3) buildkernel
On Fri, 2008-02-15 at 16:03 -0600, Derek Ragona wrote:
the prompt has ? command which shows available boot devices. The
only
device present there is my floppy (fd0)
Your new kernel is hosed. Its not probing the mass storage device of
your root disk.
Show us your original dmesg(8), your
