On 05-Jan-11 1:44 PM, Kevin Wilcox wrote:
On 5 January 2011 13:25, David Brodbeckg...@gull.us wrote:
On Wed, Jan 5, 2011 at 8:15 AM, Kevin Wilcoxkevin.wil...@gmail.com wrote:
To really see what your machine is doing, consider taking a look at
the network flows. pfflowd, netflowd, ipaudit
Yes and no. You want to leave ftp open, too, just in case for port
upgrading/downloading, plus you would want to do monitoring across the wire
(Nagios or something, maybe?). You could, though, do a dual-NIC setup and have
one be a private network LAN for the servers if you aren't already
On Wed, Jan 5, 2011 at 1:48 PM, Mark Moellering m...@msen.com wrote:
That's an excellent point. A span port from the upstream switch/router
Since I am going to be setting up a mail server sometime next week and have
to keep things like this in mind;
would it make sense to run pf and block
I'm just starting to play around with pf to get it to handle NAT for
a LAN, and I've just discovered that I don't know how to get pf to reload
/etc/pf.conf after I make changes to it. pfctl -d -e doesn't do it, and
neither does pfctl -d; pfctl -e. Is there a way to do it besides rebooting?
: Tuesday, September 09, 2008 1:18 PM
To: freebsd-questions@freebsd.org
Subject: pf question
I'm just starting to play around with pf to get it to handle NAT for
a LAN, and I've just discovered that I don't know how to get pf to reload
/etc/pf.conf after I make changes to it. pfctl -d -e
On Tue, Sep 9, 2008 at 8:17 AM, Scott Bennett [EMAIL PROTECTED] wrote:
I'm just starting to play around with pf to get it to handle NAT for
a LAN, and I've just discovered that I don't know how to get pf to reload
/etc/pf.conf after I make changes to it. pfctl -d -e doesn't do it, and
On Tue, 9 Sep 2008 00:17:39 -0500 (CDT)
Scott Bennett [EMAIL PROTECTED] wrote:
I'm just starting to play around with pf to get it to handle NAT
for a LAN, and I've just discovered that I don't know how to get pf
to reload /etc/pf.conf after I make changes to it. pfctl -d -e
doesn't do
does pf has something like ipfw -d show ?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
On 12/01/06, Vasile Cristescu [EMAIL PROTECTED] wrote:
does pf has something like ipfw -d show ?
I don't know. What does 'ipfw -d show' do?
--
Rasputin :: Jack of All Trades - Master of Nuns
http://number9.hellooperator.net/
___
Are you asking if you can print out rules?
pfctl -sr -v
Dick Davies wrote:
On 12/01/06, Vasile Cristescu [EMAIL PROTECTED] wrote:
does pf has something like ipfw -d show ?
I don't know. What does 'ipfw -d show' do?
--
Rasputin :: Jack of All Trades - Master of Nuns
Richard C. Isaacson wrote:
Dick Davies wrote:
On 12/01/06, Vasile Cristescu [EMAIL PROTECTED] wrote:
does pf has something like ipfw -d show ?
I don't know. What does 'ipfw -d show' do?
Are you asking if you can print out rules?
pfctl -sr -v
'-d' in ipfw includes the dynamic
On 2005-08-23 22:31, Matt Rechkemmer [EMAIL PROTECTED] wrote:
After banging my head for awhile, and trying other daemons (oidentd,
pidentd), I tried disabling pf with pfctl -d. Voila, clients can
connect. I re-enabled pf with pfctl -e and things are broken again.
Show us your pf.conf file,
Hello all,
I'm currently working with a FreeBSD 5.4 system running pf and ident2. When
my users attempt to connect to an IRC network, and ident is requested my ident
daemon never replies. I see the inbound packets with tcpdump, but never
anything out.
After banging my head for awhile, and
First my ifconfig -A:
# ifconfig -A
bge0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500
address:
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet 192.168.82.1 netmask 0xff00 broadcast 192.168.82.255
inet
On 2005-03-08 06:49, J.D. Bronson [EMAIL PROTECTED] wrote:
First my ifconfig -A:
# ifconfig -A
bge0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500
address:
media: Ethernet autoselect (100baseTX full-duplex)
status: active
inet
15 matches
Mail list logo
