Steve Bertrand wrote:
I have a box with the same chipset. I have 2 160GB SATA drives in a
RAID1 config, which FBSD 5.4 sees 2 disks, as opposed to the single RAID
subsystem. I install on one of the disks.
However, when I reboot the box, I get a flashing cursor in the top left
corner of the
I have asked this on freebsd-hardware but didn't hear anything so I
hoped someone here could help...
I am potentially buying a server with a Tyan Tomcat i7221 motherboard. I
am unsure of the support in FreeBSD for the following:
- ICH6R disk controller
- Broadcom BCM5721 ethernet
Ideally I
I have asked this on freebsd-hardware but didn't hear anything so I
hoped someone here could help...
I am potentially buying a server with a Tyan Tomcat i7221 motherboard. I
am unsure of the support in FreeBSD for the following:
- ICH6R disk controller
- Broadcom BCM5721 ethernet
Ideally I
Hi Jim,
I think it's not a answer to you but here is my recent experience.
I've installed FBSD 5.4 in a box with Intel ICH5R chipset.
It's working, no hangs, no panics, but the disk performance on the
second IDE disk (I'm not using RAID, just simple master/slave setup), is
[EMAIL PROTECTED] wrote:
Hi Jim,
I think it's not a answer to you but here is my recent experience.
I've installed FBSD 5.4 in a box with Intel ICH5R chipset.
It's working, no hangs, no panics, but the disk performance on the
second IDE disk (I'm not using RAID, just
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jim Mozley
Sent: Wednesday, June 22, 2005 12:13 PM
To: freebsd-questions@freebsd.org
Subject: Re: support for ICH6R controller and Broadcom ethernet
[EMAIL PROTECTED] wrote:
Hi Jim,
I
