- Original Message -
From: Vayu [EMAIL PROTECTED]
To: freebsd-questions@freebsd.org
Cc: Malcolm Fitzgerald [EMAIL PROTECTED]
Sent: Tuesday, March 21, 2006 5:36 PM
Subject: Re: Why doesn't Turn Off The Computer turn
off the computer?
On Monday 20 March 2006 20:04, Kevin Kinsey wrote:
fbsd_user wrote:
How do you tell sendmail not to do dns lookups?
FEATURE('nocanonify')
...is probably what you are looking for, otherwise you can enclose a raw IP
address in square brackets (ie, [1.2.3.4]) in a mailertable entry or elsewhere
which will disable the MX lookups for that specific
Dear Jud and friends:
Note: At least one of the prompts ended with:
# localhost
Benjamin
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Benjamin Sher wrote:
Dear Jud and friends:
OK, I finally figured out how to make OSL2000 work. In scanning all
bootable partitions, it lists FreeBSD as two partitions: the 512 MB
/boot partition (name unknown) and the FreeBSD 37 GB partition. It
will not boot FreeBSD from the FreeBSD
Hello,
here is the output from top -S :
last pid: 1570; load averages: 0.56, 0.20, 0.10
up 0+02:59:36 14:03:53
76 processes: 4 running, 47 sleeping, 2 stopped, 23 waiting
CPU states: 14.9% user, 0.0% nice, 57.4% system, 27.7% interrupt, 0.0% idle
Mem: 17M Active, 6084K Inact, 14M Wired,
Dear friends:
[Dell 8200]
First, my thanks to everyone who was kind enough to respond to my
problem booting up to FreeBSD 6.
I did a complete, fresh install from the CD and made sure to also
configure the FreeBSD boot manager for MBR. Everything should be working
but I still can't boot up.
Dear friends:
[Dell 8200]
First, my thanks to everyone who was kind enough to respond to my
problem booting up to FreeBSD 6.
I did a complete, fresh install from the CD and made sure to also
configure the FreeBSD boot manager for MBR. Everything should be working
but I still can't boot up.
Bohuslav Plucinsky wrote:
I've tried PF, suggested by Martin Hudec and it seems that PF does not
have this performance problem. I like IPFW, I use it since year 1999,
but probably is time to switch to PF.
The impact you receive is caused by user-level 'natd'. Use 'ipnat(8)'
instead as it is
When I log out and select Turn off the computer it shuts down the
system and leaves the machinery running, displaying this message:
The operating system has halted.
Please press any key to reboot.
Pressing the power button fires up the system. I have to hold the power
button down for
I am using FreeBSD-4.10, how do I boot it in single user mode?
-Ed
On 3/21/06, Derek Ragona [EMAIL PROTECTED] wrote:
Edwin,
Boot the server single user, -s. Then if you need to, bring up the IP
stack manually. Depending on your mount points, booting single user only
mounts root, so you
Edwin,
Boot the server single user, -s. Then if you need to, bring up the IP
stack manually. Depending on your mount points, booting single user only
mounts root, so you can try to fsck the other unmounted filesystems. Only
if those file systems are readable will you be able to get your
What is the maximum value of vm.kmem_size? I tried to set it to
vm.kmem_size=1069543424 (with 2G physical memory) but that apparently
did not work out nicely (lost the machine, it's remote).
Thanks,
___
freebsd-questions@freebsd.org mailing list
Yes this is what I want, but the instructions to install are
for native sendmail and not the FreeBSD way.
What is the FreeBSD way of activating the nodsn feature?
-Original Message-
From: Giorgos Keramidas [mailto:[EMAIL PROTECTED]
Sent: Monday, March 20, 2006 11:10 PM
To: fbsd_user
On Tue, 21 Mar 2006 09:45:41 -0500, Benjamin Sher
[EMAIL PROTECTED] said:
Dear friends:
[Dell 8200]
First, my thanks to everyone who was kind enough to respond to my
problem booting up to FreeBSD 6.
I did a complete, fresh install from the CD and made sure to also
configure the
Dear Jud and friends:
OK, I finally figured out how to make OSL2000 work. In scanning all
bootable partitions, it lists FreeBSD as two partitions: the 512 MB
/boot partition (name unknown) and the FreeBSD 37 GB partition. It will
not boot FreeBSD from the FreeBSD partition but, after changing
On Tue, 21 Mar 2006 15:41:15 +, Danny Butroyd
[EMAIL PROTECTED] said:
Benjamin Sher wrote:
Dear Jud and friends:
OK, I finally figured out how to make OSL2000 work. In scanning all
bootable partitions, it lists FreeBSD as two partitions: the 512 MB
/boot partition (name unknown) and
On Tuesday, March 21, 2006, at 08:50 AM, fbsd_user wrote:
Yes this is what I want, but the instructions to install are
for native sendmail and not the FreeBSD way.
What is the FreeBSD way of activating the nodsn feature?
cd to /etc/mail
vi your .mc file. It will be named
Malcolm Fitzgerald wrote:
When I log out and select Turn off the computer it shuts down the
system and leaves the machinery running, displaying this message:
The operating system has halted.
Please press any key to reboot.
Pressing the power button fires up the system. I have to hold the
Benjamin Sher wrote:
Dear Jud and friends:
OK, I finally figured out how to make OSL2000 work.
Good, I guess. :-)
In scanning all bootable partitions, it lists FreeBSD as two
partitions: the 512 MB /boot partition (name unknown)
and the FreeBSD 37 GB partition. It will not boot FreeBSD
Okay off=topic I know. But where'd the rdiff-backup-users mail list go? I
am not able to subscribe to it and have a semi-urgent matter.
Hope for some assistance soon enough.
Cheer,s
Noah
___
freebsd-questions@freebsd.org mailing list
Per olof Ljungmark wrote:
What is the maximum value of vm.kmem_size? I tried to set it to
vm.kmem_size=1069543424 (with 2G physical memory) but that apparently
did not work out nicely (lost the machine, it's remote).
Got to the machine in question, the only information on console was:
Trying to get the sound to work on my Compaq Presario M2000. With version
5.4 everything worked fine except sound and ACPI. After looking at
http://people.freebsd.org/~ariff/ I had the impression that I could get
the sound to work by applying the provided patch, but that it should work
Good morning dear person at FreeBSD questions. I am trying to install
FreeBSD 5.3 on a Compaq Proliant 5000 with multiple Pentium Pro processors
and SMART-SCSI 2/P hardware RAID array. It contains a flash-ROM BIOS. The
BIOS does not follow the conventions of fixed-ROM BIOSes such as are
These are the steps is followed
1) cd /etc/mail
2) type make
3) edit /etc/mail/hostname.mc
4) locate line containing features
5) Inserted this line FEATURE(`nodns')
6) save file and exit
7) in /etc/mail type, make, make install, and make restart
Is this the correct procedure?
-Original
On 2006-03-21 10:50, fbsd_user [EMAIL PROTECTED] wrote:
Giorgos Keramidas [mailto:[EMAIL PROTECTED] wrote:
On 2006-03-20 23:02, fbsd_user [EMAIL PROTECTED] wrote:
How do you tell sendmail not to do dns lookups?
You may be interested at the description of FEATURE(`nodns') in
the file
On Tue, 2006-03-21 at 08:50 -0800, Lee Shackelford wrote:
Good morning dear person at FreeBSD questions. I am trying to install
FreeBSD 5.3 on a Compaq Proliant 5000 with multiple Pentium Pro processors
and SMART-SCSI 2/P hardware RAID array. It contains a flash-ROM BIOS. The
BIOS does not
On Tuesday, March 21, 2006, at 09:56 AM, fbsd_user wrote:
These are the steps is followed
1) cd /etc/mail
2) type make
3) edit /etc/mail/hostname.mc
4) locate line containing features
5) Inserted this line FEATURE(`nodns')
6) save file and exit
7) in /etc/mail type, make, make install, and
On Tue, 21 Mar 2006 18:46:25 +0100 (CET)
Anna Davour [EMAIL PROTECTED] wrote:
Trying to get the sound to work on my Compaq Presario M2000. With
version 5.4 everything worked fine except sound and ACPI. After
looking at http://people.freebsd.org/~ariff/ I had the impression
that I could
I use grub, after that menu there is a FreeBSD menu with options for single
user mode, safe mode, kernal loader, etc...
Is there a way to eliminate the FreesBSD menu and move those options to the
grub menu? (actually I only want a couple of those options, like safe mode,
single user mode and
On 3/21/06, Joseph Vella [EMAIL PROTECTED] wrote:
Is there a way to eliminate the FreesBSD menu and move those options to the
grub menu? (actually I only want a couple of those options, like safe mode,
single user mode and the loader prompt or maybe just the option to boot into
my previously
I have a web server on my private lan that I want
to be accessible from the public internet.
dc0 is the interface facing the public internet
I added this rdr rule after the map rules at the end of my nat file.
rdr dc0 0/0 port 80 - 10.0.10.4 port 8080
also tried this rule
rdr dc0
I posted about this a few months ago, and emailed the guy at Microsoft who
has the blog about VPC7. I never got anywhere, and eventually gave up. His
blogchart says FreeBSD works with VPC7, which seemed wrong to me.
On 3/20/06, Rocco Caputo [EMAIL PROTECTED] wrote:
The good news is that
Hello
I have a machine which have Raid5 and Freebsd6.0 runs on it.
I have 2 questions
Let me ask you
1 - When I type in command line as below I sometimes see a thing.
systat 1 -vmstat
3 usersLoad 0.00 0.00 0.00 Mar 21 21:03
Mem:KBREALVIRTUAL
Halid Faith wrote:
2 - When I type netstat -na I see that udp port 514 is open as below
udp4 0 0 *.514 *.*
udp6 0 0 *.514 *.*
Should I close this port ? then How can I close this port?
shiva2# grep 514 /etc/services
syslog
Hi,
I am currently running freebsd 6 (amd64) on dells servers that have
dual xeon processors in them. There is also 4 gigs of ram in them.
I need to reinstall cause I want to go to i386 version (too much
problems finding binairies compatible with amd64 with commercial vendors)
Could
I have upgraded 4 different machines from various FreeBSD versions of
5 to various versions of 6 and 3 of the machines has a problem where
the clock will drift very quickly slowing about 2 seconds per minute.
These are the machines with dmesg | grep time: (specs from
[1]www.hp.com)
On Tue, 21 Mar 2006 14:57:15 -0500
Ian Lord [EMAIL PROTECTED] wrote:
I am currently running freebsd 6 (amd64) on dells servers that have
dual xeon processors in them. There is also 4 gigs of ram in them.
I need to reinstall cause I want to go to i386 version (too much
problems finding
Hello
I have a machine which have Raid5 and Freebsd6.0 runs on it.
When I type in command line as below I sometimes see a thing.
systat 1 -vmstat
3 usersLoad 0.00 0.00 0.00 Mar 21 21:03
Mem:KBREALVIRTUAL VN PAGER SWAP PAGER
On 22/03/2006, at 3:23 AM, [EMAIL PROTECTED] wrote:
Malcolm Fitzgerald wrote:
When I log out and select Turn off the computer it shuts down the
system and leaves the machinery running, displaying this message:
The operating system has halted.
Please press any key to reboot.
I figure you use
OK
Might this condition ( udp port 514 is open ) be vulnerable ?
- Original Message -
From: Miguel [EMAIL PROTECTED]
To: Halid Faith [EMAIL PROTECTED]
Cc: freebsd-questions@freebsd.org
Sent: Tuesday, March 21, 2006 9:47 PM
Subject: Re: What does udp port 514 use?
Halid Faith wrote:
Greetings all,
Since recently cvsup'ing my ports collection I'm now getting the
following error each time I try to make any port. I'm guessing it could
be because the system is running FreeBSD 4.8. This is the error after
trying to make a port:
/usr/ports/Mk/bsd.port.mk, line 5075: warning:
On Tue, Mar 21, 2006 at 05:48:16PM -0400, Matt Rudderham wrote:
Greetings all,
Since recently cvsup'ing my ports collection I'm now getting the
following error each time I try to make any port. I'm guessing it could
be because the system is running FreeBSD 4.8. This is the error after
On Tue, Mar 21, 2006 at 05:02:14PM -0500, Kris Kennaway wrote:
On Tue, Mar 21, 2006 at 05:48:16PM -0400, Matt Rudderham wrote:
Greetings all,
Since recently cvsup'ing my ports collection I'm now getting the
following error each time I try to make any port. I'm guessing it could
be
Hi,
I am trying to learn how to trace kernel issues
or determine if a problem even is a kernel issue.
Here are the debugging options I have set in my kernel config.
makeoptions DEBUG=-g
options KDB
options KDB_TRACE
options DDB
options KTRACE
options
Frederic Van Assche wrote:
Hello,
What would be the best CPUTYPE setting for a Pentium M 750? pentium-m or
pentium4m?
Thanks,
Frederic
pentium-m
___
freebsd-questions@freebsd.org mailing list
hello,
the handbook directions seem direct and specific. but
#pkg_add -r openoffice
...
produces:
Error: FTP Unable to get
ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-6-stable/Latest/openoffice.tbz:
File unavailable (e.g., file not found, no access)
pkg_add: unable to fetch
On 3/21/06, David Armour [EMAIL PROTECTED] wrote:
the handbook directions seem direct and specific. but
#pkg_add -r openoffice
...
produces:
Error: FTP Unable to get
ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-6-stable/Latest/openoffice.tbz:
File unavailable (e.g., file not
* David Armour [EMAIL PROTECTED] wrote:
hello,
the handbook directions seem direct and specific. but
#pkg_add -r openoffice
...
produces:
Error: FTP Unable to get
ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-6-stable/Latest/openoffice.tbz:
File unavailable (e.g., file not
On Tue, Mar 21, 2006 at 02:44:02PM -0800, David Armour wrote:
hello,
the handbook directions seem direct and specific. but
#pkg_add -r openoffice
...
produces:
Error: FTP Unable to get
ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-6-stable/Latest/openoffice.tbz:
File
On Tue, 21 Mar 2006, Yance Kowara wrote:
[snip]
Yes, strangely enough shutdown -h now in FreeBSD will only halt the
machine. halt -p will poweroff the box, and shutdown -p now will also
power off the box.
The shutdown options don't seem very strange to me: H stands for Halt, P
stands for
Kenyon Ralph wrote:
On 3/21/06, David Armour [EMAIL PROTECTED] wrote:
the handbook directions seem direct and specific. but
#pkg_add -r openoffice
...
produces:
Error: FTP Unable to get
ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-6-stable/Latest/openoffice.tbz:
File unavailable
Several weeks ago I tried enabling soft-updates on / partition of active
file system in multi-user mode via
tunefs -n enable /dev/ar0s1a
having remounted it read-only.
After that I just rebooted the system and according to mount
soft-updates were enabled. (I tried remounting / partition to RW
In the last episode (Mar 21), Halid Faith said:
Hello
I have a machine which have Raid5 and Freebsd6.0 runs on it.
When I type in command line as below I sometimes see a thing.
systat 1 -vmstat
Disks amrd0 pass0 52 ofodintrn 1996 cpu2:
KB/t 6.04 0.00
Hi,
I am using a USB to centronix cable to my Lexmark Optra and lpr prints
sometimes, and then sometimes it
won't. /dev/ulpt0 support is compiled into my kernel.
lpc status lp command reports that it is up, a job is spooled, and the
printer is idle but nothing comes
out.
I am finding the
At 3:59 PM -0800 3/21/06, Rob wrote:
lpc status lp command reports that it is up, a job is
spooled, and the printer is idle but nothing comes out.
I am finding the following ... in /var/log/lpd.errs:
lp: unable to open dfA000xenon ('f' line)
lp: job could not be printed (cfA000xenon)
xenon
Hello,
Since two or three weeks running ./configure seems to ignore any command line
arguments, because $ac_option is not set.
Any suggestions?
Thanks,
Frederic
--
PGP key: http://frederic.classic-gaming.net/PGP/frederic.asc
pgpHKJfEOB4xA.pgp
Description: PGP signature
Alfred Morgan [EMAIL PROTECTED] wrote:
I have upgraded 4 different machines from various FreeBSD versions of
5 to various versions of 6 and 3 of the machines has a problem where
the clock will drift very quickly slowing about 2 seconds per minute.
Interesting. Were all the upgrades
fbsd_user [EMAIL PROTECTED] wrote:
I have a web server on my private lan that I want
to be accessible from the public internet.
dc0 is the interface facing the public internet
I added this rdr rule after the map rules at the end of my nat file.
rdr dc0 0/0 port 80 - 10.0.10.4 port 8080
also
Hi,
I've sendmail running locally, I access it by
telnet to 25 port but from a remote pc I cann't
do it.
What params of config do I must to touch to allow
remote access to sendmail?
Thanks...
Efren Bravo.
__
When I try to install the multimedia/handbrake port, I get the following
error message:
_
=== Vulnerability check disabled, database not found
= HandBrake-0.6.2-src.tar.gz doesn't
On 3/21/06, David Armour [EMAIL PROTECTED] wrote:
it's still fetching it, as we speak... (tip-toeing around) i installed
the port a few weeks ago on a different install, and it required 9gb.
is there a way to find out how much space the package needs / uses? i
got the impression that the
On 3/21/06, Efren Bravo [EMAIL PROTECTED] wrote:
What params of config do I must to touch to allow
remote access to sendmail?
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/sendmail.html
___
freebsd-questions@freebsd.org mailing list
I have now enabled ACPI on one machine (making the computer more
unstable) and it has stopped drifting. ntpd was disabled for this
test. Now that it shows it stopped drifting I have enabled ntpd to see
if that causes problems.
On another machine I have left ACPI disabled and restarted ntpd
I have a no name 2 port KVM switch and a Logitech marble mouse USB with a ps/2
adapter.
The KVM switch works on port 1 and 2 when it is connected to the windows box.
The mouse works on the ps/2 port when it is connected directly to the BSD box.
When the mouse is connected via the KVM switch the
* David Armour dfarmour at myrealbox.com wrote:
the handbook directions seem direct and specific. but
#pkg_add -r openoffice
...
produces:
Error: FTP Unable to get
ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-6-stable/Latest/openoffice.tbz:
File unavailable (e.g., file not found, no
Malcolm Fitzgerald wrote:
On 22/03/2006, at 3:23 AM, [EMAIL PROTECTED] wrote:
Malcolm Fitzgerald wrote:
When I log out and select Turn off the computer it shuts down the
system and leaves the machinery running, displaying this message:
The operating system has halted.
Please press any key
On Tue, Mar 21, 2006 at 02:44:02PM -0800, David Armour wrote:
the handbook directions seem direct and specific. but
#pkg_add -r openoffice
...
produces:
Error: FTP Unable to get
ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-6-stable/Latest/openoffice.tbz:
File unavailable (e.g.,
Hi,
I'd like to try out FreeBSD and was wondering whether
I should start with 6.1-BETA4 or 6.0? Its just for
home use anyways, more as a way to fool around with
FreeBSD a bit, so was wondering if 6.1-BETA4 would
suffice for the purpose ... is it stable enough or
would it give me issues?
Also,
Rakhesh Sasidharan wrote:
Hi,
I'd like to try out FreeBSD and was wondering whether
I should start with 6.1-BETA4 or 6.0? Its just for
home use anyways, more as a way to fool around with
FreeBSD a bit, so was wondering if 6.1-BETA4 would
suffice for the purpose ... is it stable enough or
would
Great! That was a good point too. If I start with 6.0, it would be a good
experience for me upgrading to 6.1. :) Super!
Sergey Kovalev [EMAIL PROTECTED] wrote: Rakhesh Sasidharan wrote:
Hi,
I'd like to try out FreeBSD and was wondering whether
I should start with 6.1-BETA4 or 6.0? Its just
On 3/22/06, Sergey Kovalev [EMAIL PROTECTED] wrote:
Several weeks ago I tried enabling soft-updates on / partition of active
file system in multi-user mode via
tunefs -n enable /dev/ar0s1a
having remounted it read-only.
After that I just rebooted the system and according to mount
On 3/22/06, Donald T Hayford [EMAIL PROTECTED] wrote:
When I try to install the multimedia/handbrake port, I get the following
error message:
_
=== Vulnerability check disabled,
On 3/21/06, Frederic Van Assche [EMAIL PROTECTED] wrote:
Hello,
What would be the best CPUTYPE setting for a Pentium M 750? pentium-m or
pentium4m?
Thanks,
Frederic
--
PGP key: http://frederic.cgarchive.com/PGP/frederic.asc
On 3/22/06, Halid Faith [EMAIL PROTECTED] wrote:
OK
Might this condition ( udp port 514 is open ) be vulnerable ?
You bet
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send
Hello friend !
You have just received a postcard from someone who cares about you!
This is a part of the message:
Hy there! It has been a long time since I haven't heared about you!
I've just found out about this service from Claire, a friend of mine
who also told me that...
75 matches
Mail list logo
